4.91 chg-lg-card

Use this command to change the group of an LG card.

The command class is TKLC_INTERNAL inheriting properties of DEBUG class. The Load Generator is supported on IPSG, IPLHC, IPGHC and SS7HC GPLs.

Parameters

grp (mandatory)

Range:

ayyyyyyyyy

Up to 10 alphanumeric characters; the first character must be a letter.

loc (mandatory)

The card location as stenciled on the shelf of the system.

Range:

1101 - 1108, 1111 - 1112, 1201 - 1208, 1211 - 1218, 1301 - 1308, 1311 - 1318, 2101 - 2108, 2111 - 2118, 2201 - 2208, 2211 - 2218, 2301 - 2308, 2311 - 2318, 3101 - 3108, 3111 - 3118, 3201 - 3208, 3211 - 3218, 3301 - 3308, 3311 - 3318, 4101 - 4108, 4111 - 4118, 4201 - 4208, 4211 - 4218, 4301 - 4308, 4311 - 4318, 5101 - 5108, 5111 - 5118, 5201 - 5208, 5211 - 5218, 5301 - 5308, 5311 - 5318, 6101 - 6108, 6111 - 6118

Example

chg-lg-card:loc=1304:grp=lggroup1

Dependencies

The specified grp parameter value must exist in the database.

The card location must not be 1113-1118, or xy09 and xy10 where x is the frame and y is the shelf.

The LG Card table is corrupt or cannot be found.

The card location specified in the loc parameter must be of a provisioned LG card.

The LG Group table is corrupt or cannot be found.

The loc and grp parameters are mandatory

Changing the group of an LG card to which it is already a part of has no effect.

Output