ent-lg-engine

Use this command to create an LG engine. An LG Engine is associated with a single LG Card. The command class is TKLC_INTERNAL inheriting properties of DEBUG class. The Load Generator is supported on IPSG, IPLHC, IPGHC and SS7HC GPLs.

Parameters

engine (mandatory)

Range: ayyyyyyyyy: Up to 10 alphanumeric characters; the first character must be a letter.

event (mandatory)

Range: ayyyyyyyyy: Up to 10 alphanumeric characters; the first character must be a letter

loc (mandatory)

The card location as stenciled on the shelf of the system.

Range:: 1101 - 1108, 1111 - 1112, 1201 - 1208, 1211 - 1218, 1301 - 1308, 1311 - 1318, 2101 - 2108, 2111 - 2118, 2201 - 2208, 2211 - 2218, 2301 - 2308, 2311 - 2318, 3101 - 3108, 3111 - 3118, 3201 - 3208, 3211 - 3218, 3301 - 3308, 3311 - 3318, 4101 - 4108, 4111 - 4118, 4201 - 4208, 4211 - 4218, 4301 - 4308, 4311 - 4318, 5101 - 5108, 5111 - 5118, 5201 - 5208, 5211 - 5218, 5301 - 5308, 5311 - 5318, 6101 - 6108, 6111 - 6118

action (optional)

Transmitting and receiving actions of a LG Engine.

Range:

snk: Rx Action: Sink Mode
ret: Rx Action: Return Mode
retl2: Rx Action: Return by L2 Mode
cong: Rx Action: Congestion
cap: Rx Action: capture mode
pbk: Tx Action: Playback mode

port (optional)

The signaling link on the card specified in the loc parameter. The links can be specified in any sequence or pattern.

Synonym:

link

Range:

a, b, a1 - a31, b1 - b31

Not all card types support all link parameter values.

See Summary of Range Values for :link Parameter for valid link parameter range values for each type of card that can have a location specified in the loc parameter.

rxengine (optional)

Receiving LG Engine name.

Range:: ayyyyyyyyy
Up to 10 alphanumeric characters; the first character must be a letter.

txrate (optional)

Transmission rate of a LG Engine.

Range:: 0 - 10000

Example

ent-lg-engine:engine=txengine1:loc=1302:event=txisup1:port=a:txrate=100

ent-lg-engine:engine=rxengine1:loc=1302:event=rxisup1:action=cap

ent-lg-engine:engine=txengine2:loc=1302:event=txisup2:action=pbk:rxengine=rxengine1

Dependencies

The value specified for the engine parameter cannot already exist in the LG Engine table.

The LG Engine table is corrupt or cannot be found.

The number of engines associated with a card should not exceed the max limit.

The number of events associated with a engine should not exceed the max limit.

The txrate parameter cannot be specified with the parameter event of Rx type.

The action parameter of type PBK can only be assigned to Tx event direction.

The engine name specified shouldn't be an Eagle reserved name

The action parameter of type SNK/RET/RETL2/CONG/CAP can only be assigned to RX event direction.

The card location specified in the loc parameter must be of a provisioned LG card.

The port specified in the command must be provisioned.

The rxengine parameter cannot be specified with the action parameter of type other than PBK.

The specifiedRx engine parameter value must be associated with the card.

The Rxengine specified must pre-exist in the LG Engine table.

Engine specified in RxEngine parameter must of Rx Type.

The LG Event name specified in the command must exist in the table

The LG Engine table cannot already be full.

SIF Size > 272 not supported on ss7hc

The Rx Event can not be associated to more than one Engine on the same LG card

The LG Card and Event specified in the command must belong to same network

The port parameter cannot be specified with the parameter event of Rx type.

Output

4.320 ent-lg-engine