4.198 dlt-e1

Use this command to delete an interface for E5-E1T1-B cards used as E1 or SE-HSL cards.

Parameters

e1port (mandatory)

E1 port number.

Range:

1 - 8

loc (mandatory)

The card location as stenciled on the shelf of the system.

Range:

1101 - 1108, 1111 - 1112, 1201 - 1208, 1211 - 1218, 1301 - 1308, 1311 - 1318, 2101 - 2108, 2111 - 2118, 2201 - 2208, 2211 - 2218, 2301 - 2308, 2311 - 2318, 3101 - 3108, 3111 - 3118, 3201 - 3208, 3211 - 3218, 3301 - 3308, 3311 - 3318, 4101 - 4108, 4111 - 4118, 4201 - 4208, 4211 - 4218, 4301 - 4308, 4311 - 4318, 5101 - 5108, 5111 - 5118, 5201 - 5208, 5211 - 5218, 5301 - 5308, 5311 - 5318, 6101 - 6108, 6111 - 6118

Example

dlt-e1:loc=1205:e1port=1

Dependencies

The card in the location specified by the loc parameter must be equipped.

The card in the location specified by the loc parameter must be a LIME1 card type.

The port specified by the e1port parameter must be already equipped with an E1 interface.

The E1/T1 table must be accessible.

The Card (IMT) table must be accessible.

All signaling links providing timeslots serviced by the specified E1 interface must be deleted before the E1 interface can be deleted.  See the dlt-slk command to delete the signaling links providing the timeslots.

Card locations 1113 - 1118 (control cards) cannot be specified as values for the loc parameter.

Notes

None.

Output

dlt-e1:loc=1205:e1port=1

    rlghncxa03w 04-02-20 09:07:58 EST  EAGLE 31.3.0
    dlt-E1: MASP A - COMPLTD 
;