4.390 rept-imt-lvl2
Use this command to display IMT level 2 statistics for a card. This report displays IMT traffic statistics for one or both IMT busses in the system. The report can be filtered as follows:
- Report statistics between the source card (specified with the loc or l parameter), whose statistics pool is queried for report information, and another card (specified with the sloc or s parameter).
- Report statistics between the source card and a range of cards (specified with the sloc/eloc or s/e parameter combination).
Parameters
- e (optional)
- End address. The IMT address of the last card in the range. A decimal value or a hexadecimal value can be specified for this parameter (see Table 4-46 to map the values by card location).
- eloc (optional)
- End location. Specifies the card location of the last card in the range.
- Range:
- 1101 - 1108, 1111 - 1113, 1115, 1201 - 1208, 1211 - 1218, 1301 - 1308, 1311 - 1318, 2101 - 2108, 2111 - 2118, 2201 - 2208, 2211 - 2218, 2301 - 2308, 2311 - 2318, 3101 - 3108, 3111 - 3118, 3201 - 3208, 3211 - 3218, 3301 - 3308, 3311 - 3318, 4101 - 4108, 4111 - 4118, 4201 - 4208, 4211 - 4218, 4301 - 4308, 4311 - 4318, 5101 - 5108, 5111 - 5118, 5201 - 5208, 5211 - 5218, 5301 - 5308, 5311 - 5318, 6101 - 6108, 6111 - 6118
- Default:
- If sloc is specified—current sloc value; displays information for one card.
If sloc is not specified— 1115, which corresponds to IMT address 251 (e=251); displays information for entire range of locations.
- l (optional)
- Source card IMT address. The IMT address of the card whose statistics pool is to be queried for report information.
- loc (optional)
- Source card location. The location of the card whose statistics pool is to be queried for report information.
- Range:
- 1101 - 1108, 1111 - 1113, 1115, 1201 - 1208, 1211 - 1218, 1301 - 1308, 1311 - 1318, 2101 - 2108, 2111 - 2118, 2201 - 2208, 2211 - 2218, 2301 - 2308, 2311 - 2318, 3101 - 3108, 3111 - 3118, 3201 - 3208, 3211 - 3218, 3301 - 3308, 3311 - 3318, 4101 - 4108, 4111 - 4118, 4201 - 4208, 4211 - 4218, 4301 - 4308, 4311 - 4318, 5101 - 5108, 5111 - 5118, 5201 - 5208, 5211 - 5218, 5301 - 5308, 5311 - 5318, 6101 - 6108, 6111 - 6118
- s (optional)
- Start address. The IMT address of the first (or only) card in the range. A decimal value or a hexadecimal value can be specified for this parameter (see Table 4-46 to map the values by card location).
- sloc (optional)
- Start location. The card location of the first card in the range.
- Range:
- 1101 - 1108, 1111 - 1113, 1115, 1201 - 1208, 1211 - 1218, 1301 - 1308, 1311 - 1318, 2101 - 2108, 2111 - 2118, 2201 - 2208, 2211 - 2218, 2301 - 2308, 2311 - 2318, 3101 - 3108, 3111 - 3118, 3201 - 3208, 3211 - 3218, 3301 - 3308, 3311 - 3318, 4101 - 4108, 4111 - 4118, 4201 - 4208, 4211 - 4218, 4301 - 4308, 4311 - 4318, 5101 - 5108, 5111 - 5118, 5201 - 5208, 5211 - 5218 5301 - 5308, 5311 - 5318, 6101 - 6108, 6111 - 6118
- Default:
- If eloc is specified—current sloc value.
If eloc is not specified—IMT address 0 (s=0).
Example
rept-imt-lvl2:l=00:s=00:e=02:b=a
Dependencies
The s/e parameters and sloc/eloc parameters cannot be specified together in the command.
This command cannot be entered if the clr-imt-stats, rept-imt-info, rept-imt-lvl1, or tst-imt command is running.
The l or loc parameter must be specified.
This command cannot be entered during IMT statistics collection following an hourly boundary.
The l parameter or the loc parameter must be specified. Both parameters cannot be specified.
A card location must be specified that is valid and defined in the database.
This command cannot be entered during an Extended Bit Error Rate Test (BERT).
Notes
Table 4-46 maps each card location to the decimal and hexadecimal values that can be specified for the s and e parameters.
Table 4-46 maps each card location to the decimal and hexadecimal values that can be specified for the s and e parameters.
Output
If the source card location falls within the range of cards specified with the sloc/eloc or s/e parameters, then the output report for the source card shows zeros. The zeros are reported because the source card location does not use the IMT to communicate with itself and, therefore, does not report any values or pegs for traffic routed to itself. This command reports the values or pegs received, transmitted, or re-transmitted across the IMT bus.
rept-imt-lvl2:sloc=1101:eloc=1115:loc=1101
tklc1170501 17-05-17 04:23:21 EST EAGLE 46.5.0.0.0-70.32.0
rept-imt-lvl2:sloc=1101:eloc=1115:loc=1101
Command entered at terminal #18.
;
Command Accepted - Processing
tklc1170501 17-05-17 04:23:21 EST EAGLE 46.5.0.0.0-70.32.0
Retrieving data from card...
--------------------------------------------------------------------------
Card: H'00f0 Bus: A
Field f0 f1 f2 f3 f4 f5 f6 f7
----- ---- ---- ---- ---- ---- ---- ---- ----
Link Status ALGN ALGN ALGN ALGN ALGN -OS- ALGN -OS-
OS Count (dec) 1 3 3 3 12 0 12 0
Transmit BSN (dec) 0 2 2 2 2 0 2 0
Transmit FSN (dec) 0 209 2 2 2 0 2 0
Receive BSN (dec) 0 209 2 2 2 0 2 0
Receive FSN (dec) 1 3 3 3 3 1 3 1
Unack Messages (dec) 0 0 0 0 0 0 0 0
Invalid Length (dec) 0 0 0 0 0 0 0 0
Invalid rx BSN (dec) 0 0 0 0 0 0 0 0
Invalid rx FSN (dec) 0 0 0 0 0 0 0 0
GBSU sync count (dec) 2 5 5 5 17 0 17 0
GBSU seq err (dec) 0 0 0 0 0 0 0 0
GBSU lost pkt (dec) 0 0 0 0 0 0 0 0
RTB Address (hex) 0000 0000 0000 0000 0000 0000 0000 0000
Retx Count (dec) 0 0 0 0 0 0 0 0
Minimum ack time (ms) 4 4 4 4 4 0 4 0
Maximum ack time (ms) 0 0 0 0 0 0 0 0
;
tklc1170501 17-05-17 04:23:23 EST EAGLE 46.5.0.0.0-70.32.0
--------------------------------------------------------------------------
Card: H'00f0 Bus: A
Field f8 f9 fa fb
----- ---- ---- ---- ----
Link Status ALGN ALGN -OS- ALGN
OS Count (dec) 1 4 131 175
Transmit BSN (dec) 2 2 2 158
Transmit FSN (dec) 2 2 2 142
Receive BSN (dec) 2 2 2 142
Receive FSN (dec) 3 3 3 159
Unack Messages (dec) 0 0 0 0
Invalid Length (dec) 0 0 0 0
Invalid rx BSN (dec) 0 0 0 0
Invalid rx FSN (dec) 0 0 0 0
GBSU sync count (dec) 1 5 0 0
GBSU seq err (dec) 0 0 0 0
GBSU lost pkt (dec) 0 0 0 0
RTB Address (hex) 0000 0000 0000 0000
Retx Count (dec) 0 0 1 0
Minimum ack time (ms) 4 4 4 4
Maximum ack time (ms) 0 0 0 0
;
tklc1170501 17-05-17 04:23:24 EST EAGLE 46.5.0.0.0-70.32.0
--------------------------------------------------------------------------
Card: H'00f0 Bus: B
Field f0 f1 f2 f3 f4 f5 f6 f7
----- ---- ---- ---- ---- ---- ---- ---- ----
Link Status ALGN ALGN ALGN ALGN ALGN -OS- ALGN -OS-
OS Count (dec) 1 3 3 2 12 0 11 0
Transmit BSN (dec) 0 0 0 0 0 0 0 0
Transmit FSN (dec) 0 0 0 0 0 0 0 0
Receive BSN (dec) 0 0 0 0 0 0 0 0
Receive FSN (dec) 1 1 1 1 1 1 1 1
Unack Messages (dec) 0 0 0 0 0 0 0 0
Invalid Length (dec) 0 0 0 0 0 0 0 0
Invalid rx BSN (dec) 0 0 0 0 0 0 0 0
Invalid rx FSN (dec) 0 0 0 0 0 0 0 0
GBSU sync count (dec) 0 0 0 0 0 0 0 0
GBSU seq err (dec) 0 0 0 0 0 0 0 0
GBSU lost pkt (dec) 0 0 0 0 0 0 0 0
RTB Address (hex) 0000 0000 0000 0000 0000 0000 0000 0000
Retx Count (dec) 0 1 1 1 0 0 0 0
Minimum ack time (ms) 4 4 4 4 4 0 4 0
Maximum ack time (ms) 0 0 0 0 0 0 0 0
;
tklc1170501 17-05-17 04:23:25 EST EAGLE 46.5.0.0.0-70.32.0
--------------------------------------------------------------------------
Card: H'00f0 Bus: B
Field f8 f9 fa fb
----- ---- ---- ---- ----
Link Status ALGN ALGN -OS- ALGN
OS Count (dec) 0 3 128 172
Transmit BSN (dec) 0 0 0 0
Transmit FSN (dec) 0 0 0 0
Receive BSN (dec) 0 0 0 0
Receive FSN (dec) 1 1 1 1
Unack Messages (dec) 0 0 0 0
Invalid Length (dec) 0 0 0 0
Invalid rx BSN (dec) 0 0 0 0
Invalid rx FSN (dec) 0 0 0 0
GBSU sync count (dec) 0 0 0 0
GBSU seq err (dec) 0 0 0 0
GBSU lost pkt (dec) 0 0 0 0
RTB Address (hex) 0000 0000 0000 0000
Retx Count (dec) 0 0 1 0
Minimum ack time (ms) 4 4 4 4
Maximum ack time (ms) 0 0 0 0
;
tklc1170501 17-05-17 04:23:26 EST EAGLE 46.5.0.0.0-70.32.0
--------------------------------------------------------------------------
;END OF REPORT
;
tklc1170501 17-05-17 04:23:26 EST EAGLE 46.5.0.0.0-70.32.0
Command Completed.
;
Command Executed
Legend
- Card—IMT address of the card location specified by the l parameter in this command in hexadecimal
- Bus—IMT bus for which the IMT level 2 statistics are being reported
- Field—IMT level 2 statistics displayed in this report
- 00 - ef—IMT address of the cards on the IMT bus in hexadecimal
- Link Status—Status of the link: ALGN (aligned) or OS (out of service)
- OS Count—Number of times the link has cycled between being aligned and being out of service
- Transmit BSN—Number of BSNs transmitted.
- Transmit FSN—Number of FSNs transmitted
- Receive BSN—Number of BSNs received
- Receive FSN—Sequence number for the next FSN that the source card location expects to receive
- Unack Messages—Number of unacknowledged messages received
- Invalid Length—Number of messages received with invalid length indicators
- Invalid rx BSN—Number of invalid BSNs received
- Invalid rx FSN—Number of invalid FSNs received
- Invalid LSSU—Number of invalid LSSUs received
- Invalid ASU—Number of invalid ASUs received
- RTB Address—Address of the retransmission buffer, in hexadecimal
- Retx count—Number of re-transmitted MSUs
- Minimum ack time—Minimum amount of time for an acknowledgment, in milliseconds
- Maximum ack time—Maximum amount of time for an acknowledgment, in milliseconds
- GBSU sync count— The count of how many times the GBSU sequence numbers have been resynced (This is received, not sent)
- GBSU seq err— The count of how many times a cards received a GBSU out of sequence
- GBSU lost pkt—The count of lost GBSU packets in the system (This is received, not sent)
Related Topics