4.416 rept-stat-lnp

Use this command to generate a report of the local number portability (LNP) status information.

When this command is entered with no parameters, a summary of the LNP status of all equipped SCCP cards is provided. This summary includes Global Title Translation (GTT) and LNP function status for every SCCP card, as well as LNPQS system information.

When the loc parameter is specified, a detailed status of LNP information for the specified SCCP card is provided. These detailed reports include information for each of the following functions: Global Title Translation (GTT), LNP Message Relay (LNPMR), LNP Query Service (LNPQS), Personal Communication Service LNP Query Service (PLNPQS) (if the PLNP feature is turned on), Wireless LNP Query Service (WNPQS) (if the WNP feature is turned on), Triggerless LNP (TLNP) (if the TLNP feature is turned on), LRNQT (if the ITU TCAP LRN Query feature is turned on), and Automatic Call Gap (ACG).

When the card=sccp-all parameter is specified, a detailed status of LNP information for all SCCP cards is provided.

Parameters

card (optional)
Specify card=sccp-all to display a report of the LNP status of all equipped SCCP cards.
Range:
sccp-all
loc (optional)
The card location as stenciled on the shelf of the system.
Range:
1101 - 1108, 1111 - 1112, 1201 - 1208, 1211 - 1218, 1301 - 1308, 1311 - 1318, 2101 - 2108, 2111 - 2118, 2201 - 2208, 2211 - 2218, 2301 - 2308, 2311 - 2318, 3101 - 3108, 3111 - 3118, 3201 - 3208, 3211 - 3218, 3301 - 3308, 3311 - 3318, 4101 - 4108, 4111 - 4118, 4201 - 4208, 4211 - 4218, 4301 - 4308, 4311 - 4318, 5101 - 5108, 5111 - 5118, 5201 - 5208, 5211 - 5218, 5301 - 5308, 5311 - 5318, 6101 - 6108, 6111 - 6118
Default:
A summary for all cards is displayed.

Example

rept-stat-lnp

rept-stat-lnp:card=sccp-all

rept-stat-lnp:loc=1106

Dependencies

The LNP feature must be turned on before this command can be entered.

The card and loc parameters cannot be specified together in the command.

The only valid value for the card parameter is sccp-all.

No other rept-stat-xxx command can be in progress when this command is issued.

At least one SCCP card must be configured in the system.

The value specified for the loc parameter must identify a Service Module card.

Notes

The error information on this report is based on 30-second intervals. The values for number of errors and total messages are for the last 30-second period. The usage information is also updated once every 30 seconds.

When this command is entered with no parameters, a summary of the LNP subsystem status is reported, followed by a summary of the LNP status of all equipped SCCP cards. This summary includes global title translation (GTT) and LNP function status for every SCCP card, as well as LNPQS system information. The GTT status is either ACT (active) or SWDL (software loading). The LNP status is either ACT, OFFLINE, or SWDL. LNPQS system information is then provided in the following fields:

  • The ALARM STATUS displays the current alarm on the LNP Subsystem.
  • The SSN STATUS and MATE SSN STATUS fields show the state of the LNP subsystems: Prohibited, Restricted, or Allowed.
  • The ACG OVERLOAD LEVEL field shows the ACG node overload control level used by the system.
  • The system average MIC usage is expressed as a percentage of the number of MICs sent by all cards, divided by the number of responses sent by all cards.

The rept-stat-lnp command also provides a summary of the following system-wide LNP statistics.

  • The average GTT usage is expressed as the average percentage of GTT usage per card.
  • The average LNPMR usage is expressed as the average percentage of LNPMR usage per card.
  • The average LNPQS usage is expressed as the average percentage of LNPQS usage per card.
  • The average WNPQS usage is expressed as the average percentage of WNPQS usage per card. WNPQS information is displayed only if the WNP  feature is turned on.
  • The average PLNPQS usage is expressed as the average percentage of PLNPQS usage per card. PLNPQS information is displayed only if the PCS 1900 Number Portability feature (PLNP) is turned on.
  • The average LRNQT usage is expressed as the average percentage of LRNQT usage per card. LRNQT information is displayed only if the LRNQT feature is turned on.
  • The average CPU usage is expressed as the average percentage of CPU usage per card.
  • The total number of GTT, LNPMR, LNPQS, WNPQS (if turned on), TLNP (if turned on), PLNPQS (if turned on), and LRNQT (if turned on) errors for corresponding messages received across all cards.

When the rept-stat-lnp command is entered for a specific card (for example, rept-stat-lnp:loc=xxxx), status information for the card at the specified location is provided, followed by the alarm status and detailed LNP status information and statistics for each LNP function.

  • GTT STATUS, either ACT (active) or SWDL (software loading).
  • GTT USAGE, expressed as a percentage of the amount of CPU used to process GTT messages during the last 30 seconds by the specified card.
  • GTT ERRORS, the number of GTT errors detected for the total number of GTT messages received by the specified card.
  • LNPMR STATUS, either ACT (active), OFFLINE, or SWDL (software loading).
  • LNPMR USAGE, expressed as a percentage of the amount of CPU used to process LNP message relay messages during the last 30 seconds by the specified card.
  • LNPMR ERRORS, the number of LNP message relay errors detected for the total number of LNP message relay messages received by the specified card.
  • LNPQS STATUS, either ACT (active), OFFLINE, and SWDL (software loading).
  • LNPQS USAGE, expressed as a percentage of the amount of CPU used to process LNP query messages during the last 30 seconds by the specified card.
  • LNPQS ERRORS, the number of LNP query errors detected for the total number of LNP query messages received by the specified card.
  • WNPQS STATUS, either ACT (active), OFFLINE, and SWDL (software loading).
  • WNPQS USAGE, expressed as a percentage of the amount of CPU used to process WNP query messages during the last 30 seconds by the specified card.
  • WNPQS ERRORS, the number of WNP query errors detected for the total number of WNP query messages received by the specified card.

    Note:

    IS-41 LNP Queries with a TT associated with the LNPQS service are pegged as IS-41 LNP Queries with a TT associated with the WNP service under the WNPQS counter. The WNPQS STATUS, WNPQS USAGE, and WNPQS ERRORS fields are displayed only if the Wireless Number Portability feature is ON.
  • PLNPQS STATUS, either ACT (active), OFFLINE, and SWDL (software loading).
  • PLNPQS USAGE, expressed as the amount of CPU used to process PCS 1900 LNP Query messages over the last 30-second period by the specific card.
  • PLNPQS ERRORS, the number of PCS query errors detected for the total number of PCS query messages received by the specified card.

    Note:

    PCS 1900 LNP Queries with a TT associated with the LNPQS service are processed and pegged as IN LNP Queries under the LNPQS counter. The PLNPQS STATUS, PLNPQS USAGE, and PLNPQS ERRORS fields are displayed only if the PCS 1900 Number Portability (PLNP) feature is ON.
  • TLNP STATUS, either ACT (active), OFFLINE, and SWDL (software loading).
  • TLNP USAGE, expressed as a percentage of the amount of CPU used to process Triggerless LNP Encapsulated IAM messages over the last 30-second period by the specific card.
  • TLNP ERRORS, the number of TLNP query errors detected for the total number of TLNP query messages received by the specified card.

    Note:

    The TLNP STATUS, TLNP USAGE, and TLNP ERRORS fields are displayed only if the Triggerless LNP (TLNP) feature is ON.
  • LRNQT STATUS, either ACT (active), OFFLINE, and SWDL (software loading).
  • LRNQT USAGE, expressed as a percentage of the amount of CPU used to process LRNQT queries over the last 30-second period by the specific card.
  • LRNQT ERRORS, the number of LRNQT query errors detected for the total number of LRNQT messages received by the specified card.

    Note:

    The LRNQT STATUS, LRNQT USAGE, and LRNQT ERRORS fields are displayed only if the LRNQT feature is ON.
  • ACG OVERLOAD LEVEL, the ACG node overload control level being used by the system.
  • MIC USAGE, expressed as a percentage of the number of MICs sent by the specific card divided by the number of responses sent by the specified card during the last 30 seconds.
  • CPU USAGE, expressed as a percentage of the amount of CPU used to process messages by the specified card during the last 30 seconds.

When the card=sccp-all parameter is specified, detailed information is provided about the status of all SCCP cards. The information displayed in the output is the same as that displayed for the loc=xxxx parameter.

Output

This example shows the output when the WNP, PLNP, TLNP, and LRNQT features are off:

rept-stat-lnp

    rlghncxa03w 08-11-14 10:37:22 EST  EAGLE 40.0.0
    LNP SUBSYSTEM REPORT  OOS-MT-DSBLD   Active      -----
      ALARM STATUS = *C  0435 LNP Subsystem is disabled

    LNP Cards Configured=  3  
    CARD   PST           SST            GTT STATUS   LNP STATUS   CPU USAGE
    1106   IS-NR         Active         ACT          OFFLINE         10%
    1201   IS-NR         Active         ACT          OFFLINE         12%
    1310   OOS-MT-DSBLD  Manual         -------      -------          0%
   
    LNPQS:
      SSN STATUS = Prohibited  MATE SSN STATUS  = Allowed
      ACG:  OVERLOAD LEVEL = 0   MIC UASGE =  0%

    AVERAGE USAGE: 
      GTT   = 13% LNPMR = 0%   LNPQS  = 0%  
    AVERAGE CPU USAGE  = 11%
    TOTAL ERRORS:  
      GTT:        0 out of    2000  
      LNPMR:      0 out of       0
      LNPQS:      0 out of       0

    PROVISIONED TABLE QTY:
      TN:           10 of   24000000  (  0%)
      NPA:           1 of     150000  (  0%)
      LRN:           3 of     100000  (  0%)

    Command Completed 
;

This example shows the output when the card= parameter is specified:

rept-stat-lnp:card=sccp-all

    tklc1190601 06-04-05 13:45:02 EST  EAGLE5 35.0.0
    CARD   VERSION        PST             SST          AST
    1205   038-003-013    IS-NR           Active       DB_DIFF
      ALARM STATUS       = **  0451 RTDB reload is required
      GTT:   STATUS = ACT       USAGE =  0%   ERRORS:     0 of     0
      LNPMR: STATUS = ACT       USAGE =  0%   ERRORS:     0 of     0
      LNPQS: STATUS = ACT       USAGE =  0%   ERRORS:     0 of     0
      WNPQS: STATUS = ACT       USAGE =  0%   ERRORS:     0 of     0
      TLNP:  STATUS = ACT       USAGE =  0%   ERRORS:     0 of     0
      PLNPQS:STATUS = ACT       USAGE =  0%   ERRORS:     0 of     0
      ACG:   OVERLOAD LEVEL = 0   MIC USAGE =  0%
      CPU USAGE =  5%

    CARD   VERSION        PST             SST          AST
    1317   038-003-013    IS-NR           Active       DB_DIFF
      ALARM STATUS       = **  0451 RTDB reload is required
      GTT:   STATUS = ACT       USAGE =  0%   ERRORS:     0 of     0
      LNPMR: STATUS = ACT       USAGE =  0%   ERRORS:     0 of     0
      LNPQS: STATUS = ACT       USAGE =  0%   ERRORS:     0 of     0
      WNPQS: STATUS = ACT       USAGE =  0%   ERRORS:     0 of     0
      TLNP:  STATUS = ACT       USAGE =  0%   ERRORS:     0 of     0
      PLNPQS:STATUS = ACT       USAGE =  0%   ERRORS:     0 of     0
      ACG:   OVERLOAD LEVEL = 0   MIC USAGE =  0%
      CPU USAGE =  5%

    CARD   VERSION        PST             SST          AST
    2213   038-003-013    IS-NR           Active       DB_DIFF
      ALARM STATUS       = **  0451 RTDB reload is required
      GTT:   STATUS = ACT       USAGE =  0%   ERRORS:     0 of     0
      LNPMR: STATUS = ACT       USAGE =  0%   ERRORS:     0 of     0
      LNPQS: STATUS = ACT       USAGE =  0%   ERRORS:     0 of     0
      WNPQS: STATUS = ACT       USAGE =  0%   ERRORS:     0 of     0
      TLNP:  STATUS = ACT       USAGE =  0%   ERRORS:     0 of     0
      PLNPQS:STATUS = ACT       USAGE =  0%   ERRORS:     0 of     0
      ACG:   OVERLOAD LEVEL = 0   MIC USAGE =  0%
      CPU USAGE =  5%

    CARD   VERSION        PST             SST          AST
    2215   -----------    OOS-MT-DSBLD    Manual       -----
      ALARM STATUS       = No Alarms.
      GTT:   STATUS = -------   USAGE =  0%   ERRORS:     0 of     0
      LNPMR: STATUS = -------   USAGE =  0%   ERRORS:     0 of     0
      LNPQS: STATUS = -------   USAGE =  0%   ERRORS:     0 of     0
      WNPQS: STATUS = -------   USAGE =  0%   ERRORS:     0 of     0
      TLNP:  STATUS = -------   USAGE =  0%   ERRORS:     0 of     0
      PLNPQS:STATUS = -------   USAGE =  0%   ERRORS:     0 of     0
      ACG:   OVERLOAD LEVEL = 0   MIC USAGE =  0%
      CPU USAGE =  0%

    CARD   VERSION        PST             SST          AST
    2217   038-003-013    IS-NR           Active       DB_DIFF
      ALARM STATUS       = **  0451 RTDB reload is required
      GTT:   STATUS = ACT       USAGE =  0%   ERRORS:     0 of     0
      LNPMR: STATUS = ACT       USAGE =  0%   ERRORS:     0 of     0
      LNPQS: STATUS = ACT       USAGE =  0%   ERRORS:     0 of     0
      WNPQS: STATUS = ACT       USAGE =  0%   ERRORS:     0 of     0
      TLNP:  STATUS = ACT       USAGE =  0%   ERRORS:     0 of     0
      PLNPQS:STATUS = ACT       USAGE =  0%   ERRORS:     0 of     0
      ACG:   OVERLOAD LEVEL = 0   MIC USAGE =  0%
      CPU USAGE =  5%

    CARD   VERSION        PST             SST          AST
    2317   -----------    OOS-MT          Isolated     -----
      ALARM STATUS       = **  0013 Card is isolated from the system
      GTT:   STATUS = -------   USAGE =  0%   ERRORS:     0 of     0
      LNPMR: STATUS = -------   USAGE =  0%   ERRORS:     0 of     0
      LNPQS: STATUS = -------   USAGE =  0%   ERRORS:     0 of     0
      WNPQS: STATUS = -------   USAGE =  0%   ERRORS:     0 of     0
      TLNP:  STATUS = -------   USAGE =  0%   ERRORS:     0 of     0
      PLNPQS:STATUS = -------   USAGE =  0%   ERRORS:     0 of     0
      ACG:   OVERLOAD LEVEL = 0   MIC USAGE =  0%
      CPU USAGE =  0%

    CARD   VERSION        PST             SST          AST
    1105   038-003-013    IS-NR           Active       DB_DIFF
      ALARM STATUS       = **  0451 RTDB reload is required
      GTT:   STATUS = ACT       USAGE =  0%   ERRORS:     0 of     0
      LNPMR: STATUS = ACT       USAGE =  0%   ERRORS:     0 of     0
      LNPQS: STATUS = ACT       USAGE =  1%   ERRORS:     0 of  1003
      WNPQS: STATUS = ACT       USAGE =  0%   ERRORS:     0 of     0
      TLNP:  STATUS = ACT       USAGE =  0%   ERRORS:     0 of     0
      PLNPQS:STATUS = ACT       USAGE =  0%   ERRORS:     0 of     0
      ACG:   OVERLOAD LEVEL = 0   MIC USAGE =  0%
      CPU USAGE =  7%

    Command Completed. 
;

This example shows the output when an LNP feature (LNP ported TNs) quantity greater than 120 million numbers is enabled, the WNP, PLNP and TLNP features are on, and the LRNQT feature is off:

rept-stat-lnp

    Integrat40 08-11-14 10:37:22 EST  EAGLE5 40.0.0
    LNP SUBSYSTEM REPORT  IS-ANR         Active      -----  
      ASSUMING MATE'S LOAD
      ALARM STATUS       = No Alarms.

    LNP Cards Configured=  5  
    CARD   PST           SST            GTT STATUS   LNP STATUS   CPU USAGE
    1106   IS-NR         Active         ACT          ACT             23%
    1201   IS-ANR        Standby        SWDL         SWDL             0%
    1205   OOS-MT-DSBLD  Manual         -------      -------          0%
    1302   OOS-MT        FLT            -------      -------          0%
    1310   IS-ANR        Standby        ACT          SWDL             0%
    LNPQS:
      SSN STATUS = Allowed     MATE SSN STATUS  = Prohibited
      ACG:  OVERLOAD LEVEL = 0   MIC USAGE = 100%

    AVERAGE USAGE: 
      GTT   = 13% LNPMR = 0%   LNPQS = 0%  
      WNPQS = 0%  TLNP  = 10%  PLNPQS = 0%
    AVERAGE CPU USAGE  = 23%
    TOTAL ERRORS:  
      GTT:        1 out of    2000  
      LNPMR:      0 out of       0
      LNPQS:      0 out of       0
      WNPQS:      0 out of       0
      PLNPQS:     0 out of       0
      TLNP:       1 out of     500

    PROVISIONED TABLE QTY:
      TN:     76800000 of   96000000  ( 80%)
      NPA:      135000 of     150000  ( 90%)
      LRN:       90000 of     100000  ( 90%)
    Command Completed. 
;

This example shows the output when the WNP, PLNP, TLNP, and LRNQT features are on:

rept-stat-lnp

    rlghncxa03w 08-10-01 08:50:14 EST  EAGLE 40.0.0
    LNP SUBSYSTEM REPORT  IS-ANR         Active      -----  
    ASSUMING MATE’S LOAD
    LNP Cards Configured=  5  
    CARD   PST           SST            GTT STATUS   LNP STATUS   CPU USAGE
    1106   IS-NR         Active         ACT          ACT             28%
    1201   IS-ANR        Standby        SWDL         SWDL             0%
    1205   OOS-MT-DSBLD  Manual         -------      -------          0%
    1302   OOS-MT        Fault          -------      -------          0%
    1310   IS-ANR        Standby        ACT          SWDL             0%

    LNPQS:
      SSN STATUS = Allowed     MATE SSN STATUS  = Prohibited
      ACG:  OVERLOAD LEVEL = 0   MIC USAGE = 100%

    AVERAGE USAGE: 
      GTT   = 13% LNPMR = 0%   LNPQS = 0%  
      WNPQS = 0%   TLNP = 10%  PLNPQS = 0%
      LRNQT  = 5%

    AVERAGE CPU USAGE  = 28%
    TOTAL ERRORS:  
      GTT:        1 out of    2000  
      LNPMR:      0 out of       0
      LNPQS:      1 out of     500
      WNPQS:      0 out of       0
      PLNPQS:     0 out of       0
      TLNP:       1 out of     500
      LRNQT:      0 out of     700
    Command Completed. 
;

This example shows the output when the WNP, PLNP, TLNP, and LRNQT features are on:

rept-stat-lnp:loc=1106

    rlghncxa03w 08-10-01 10:37:22 EST  EAGLE 40.0.0
    CARD  VERSION      TYPE    PST           SST       AST
    1106  021-101-000  TSM     IS-NR         Active    -----
      ALARM STATUS       = No Alarms.
      GTT:   STATUS = ACT       USAGE = 10%   ERRORS:    1 out of  1000
      LNPMR: STATUS = ACT       USAGE = 13%   ERRORS:    0 out of  1300
      LNPQS: STATUS = ACT       USAGE = 20%   ERRORS:    1 out of  2000
      WNPQS: STATUS = ACT       USAGE =  0%   ERRORS:    0 out of     0
      PLNPQS:STATUS = ACT       USAGE =  0%   ERRORS:    0 out of     0
      TLNP:  STATUS = ACT       USAGE =  0%   ERRORS:    0 out of     0
      LRNQT: STATUS = ACT       USAGE =  0%   ERRORS:    0 out of     0
      ACG:   OVERLOAD LEVEL = 0   MIC USAGE = 100%
      CPU USAGE = 43%  
     Command Completed. 
;

Legend