rept-stat-ls

Use this command to generate a report of the status of the MTP linksets. When a specific linkset is requested, the output displays a list of the links in the linkset and their secondary status. Output is generated for each of the 16 signaling link codes (SLC). If the Multiple Linksets to Single Adjacent Point Code (MLS) feature is turned on, and an adjacent destination point code is requested, then the output displays a summary status, including the secondary point codes, of the linksets that use that adjacent point code.

Parameters

apc (optional)

ANSI point code with subfields network indicator-network cluster-network cluster member (ni-nc-ncm). The prefix subfield indicates a private point code (prefix-ni-nc-ncm).

Range:

p-, 000-255

Specify a valid value for each subfield of the point code, and separate the subfields with a dash (-).

prefix—p-

When chg-sid:pctype=ansi is specified, ni = 000 is not valid.

When chg-sid:pctype=ansi is specified, nc = 000 is not valid if ni = 001-005.

When chg-sid:pctype=ansi is specified, nc = 000 is valid if ni = 006-255.

The point code 000-000-000 is not a valid point code.

apc/apca/apci/apcn/apcn24/apcn16 (optional): Adjacent point code.

apci (optional)

ITU international point code with subfields zone-area-id. The prefix subfield indicates a spare point code, private point code, or private and spare point code (prefix-zone-area-id).

Range:

s-, p-, ps-, 0-255

Specify a valid value for each subfield of the point code, and separate the subfields with a dash (-).

prefix—s-, p-, ps

zone—0-7

area—000-255

id—0-7

The point code 0-000-0 is not a valid point code.

apcn (optional)

ITU national point code in the format of a 5-digit number (nnnnn); or 2, 3, or 4 numbers (members) separated by dashes (m1-m2-m3-m4) as defined by the chg-stpopts:npcfmti flexible point code option. A group code must be specified when the ITUDUPPC feature is turned on (nnnnn-gc, m1-m2-m3-m4-gc). The prefix subfield indicates a spare point code, private point code, or private and spare point code (prefix-nnnnn, prefix-nnnnn-gc, prefix-m1-m2-m3-m4,prefix-m1-m2-m3-m4-gc).

Range:

s-, p-, ps-, 0-16383, aa-zz

Specify a valid value for each subfield of the point code, and separate the subfields with a dash (-).

prefix—s-, p-, ps

nnnnn—0-16383

gc—aa-zz

m1-m2-m3-m4—0-14 for each member; values must sum to 14

apcn24 (optional)

24-bit ITU national point code with subfields main signaling area-sub signaling area-signaling point (msa-ssa-sp). The prefix indicates a private point code (prefix-msa-ssa-sp).

Range:

p-, 000-255

Specify a valid value for each subfield of the point code, and separate the subfields with a dash (-).

prefix—p

msa—000–255

ssa—000–255

sp—000–255

apcn16 (optional)

16-bit ITU national point code with subfields unit number sub number area main number area (un-sna-mna). The prefix indicates a private point code (prefix-un-sna-mna).

Range:: p--, 000---127; Specify a valid value for each subfield of the point code, and separate the subfields with a dash (-).; prefix---p; un---000---127; sna---000---15; mna---000---31

lsn (optional)

Linkset name. The name of the linkset for which the report information is to be displayed.

Range:: ayyyyyyyyy
1 alphabetic character followed by up to 9 alphanumeric characters
Default:: All linksets are displayed

stat (optional)

The primary state filter. The state of the linksets for which a report will be displayed.

Range:

all: All of the primary states
alminh: Alarms inhibited
anr: In-Service-Abnormal (IS-ANR)
dsbld: Out-of-Service-Maintenance-Disabled (OOS-MT-DSBLD)
mt: Out-of-Service-Maintenance (OOS-MT)
nr: In-Service-Normal (IS-NR)

Default:

all

Example

rept-stat-ls

rept-stat-ls:lsn=lsnstpa

Dependencies

No other rept-stat-xxx command can be in progress when this command is entered.

The linkset specified by the lsn parameter must be equipped in the database.

The stat and lsn parameters cannot be specified together in the command.

The Multiple Linksets to a Single Adjacent Point Code (MLS) feature must be turned on before the apc parameter can be specified.

The lsn, stat, and apc parameters cannot be specified together in the command.

At least one linkset must be associated with the value of the apc parameter.

Notes

This command can be canceled using the F9 function key or the canc-cmd command. See canc-cmd for more information.

If no link is equipped for the SLC, the output is “___,__ UEQ.”

In this command, only ITU-international and ITU national point codes support the spare point code subtype prefix (s-) and the private and spare point code subtype prefix (ps-). All of the point code types support the private (internal) point code subtype prefix (p-).

"ASP-STATE" is shown for only IPSG-M3UA linksets.

Output

If the Proxy Point Code feature is enabled, then proxy point code information is displayed.

rept-stat-ls


    eagle10207 08-02-23 10:09:59 EST EAGLE 38.0.0
    LSN         APCA             PST           SST       AST
    ls11234567  001-001-002      OOS-MT        Prohibit  GWS
    ls11345678  001-001-003      OOS-MT        Prohibit  -----
    ls11345679  001-001-004      OOS-MT        Idle      -----
    ls1134567   001-001-005      OOS-MT        Prohibit  -----
    ls113456    001-001-006      OOS-MT        Prohibit  -----
    ls11345     001-001-007      OOS-MT        Prohibit  GWS
    ls113467    001-001-008      OOS-MT        Prohibit  -----
    ls1134      001-001-009      OOS-MT        Prohibit  -----
    ls987       009-008-007      OOS-MT        Idle      -----
    z           009-008-009      OOS-MT        Idle      -----
    cap8        008-008-008      OOS-MT        Idle      -----

    LSN         APCN             PST           SST       AST
    lsnational  16383-aa         OOS-MT        Idle      -----

    LSN         APCN24           PST           SST       AST

    LSN         APCI             PST           SST       AST
    Command Completed. 
;

This example shows the output for a linkset when the MLS feature is not turned on or the linkset is not created with a secondary point code:

rept-stat-ls:lsn=lsnstpa


    eagle10207 08-02-23 10:09:59 EST  EAGLE 38.0.0
 
    LSN         APCA         PST           SST       AST
    lsnstpa     110-15-08    IS-NR         Allowed   -----
      SPCA  = --------------
      ALARM STATUS       = No Alarms.
      SCRSET  = ----
      GWSA    = ----
      GWSM    = ----
      GWSD    = ----
      SLC SLK     SST          SLC SLK     SST
      0   1207,A  Avail        8   ----,-  UEQ     
      1   1203,A  Avail        9   ----,-  UEQ     
      2   1103,B  LPBK         10  ----,-  UEQ     
      3   ----,-  UEQ          11  ----,-  UEQ     
      4   ----,-  UEQ          12  ----,-  UEQ     
      5   ----,-  UEQ          13  ----,-  UEQ     
      6   ----,-  UEQ          14  ----,-  UEQ     
      7   ----,-  UEQ          15  ----,-  UEQ     
    Command Completed. 
;

This example shows the output when some linksets contain spare and private adjacent point codes:

rept-stat-ls


    tekelecstp 02-03-20 21:22:04 EST  EAGLE 31.12.0
    LSN            APCA             PST           SST       AST
    ls11234567     001-001-002      OOS-MT        Prohibit  GWS
    ls11345678     001-001-003      OOS-MT        Prohibit  -----
    ls11345679     001-001-004      OOS-MT        Idle      -----
    ls1134567      001-001-005      OOS-MT        Prohibit  -----
    ls113456       001-001-006      OOS-MT        Prohibit  -----
    ls11345      p-001-001-007      OOS-MT        Prohibit  GWS
    ls113467       001-001-008      OOS-MT        Prohibit  -----
    ls1134       p-001-001-009      OOS-MT        Prohibit  -----
    ls987          009-008-007      OOS-MT        Idle      -----
    z              009-008-009      OOS-MT        Idle      -----
    cap8           008-008-008      OOS-MT        Idle      -----

    LSN            APCN             PST           SST       AST
    lsnational   s-09-14-05-3-ab    OOS-MT        Idle      -----
                
    LSN            APCN24           PST           SST       AST

    LSN            APCI             PST           SST       AST
    Command Completed. 
;

This example shows the output when the Multiple Linksets to a Single Adjacent Point Code (MLS) feature is turned on, and the linkset is created with a secondary point code:

rept-stat-ls:lsn=lsnstpa


    eagle10207 08-02-23 10:09:59 EST  EAGLE 38.0.0
    LSN         APCA         PST           SST       AST
    lsnstpa     110-15-08    IS-NR         Allowed   -----
      SPCA  =   120-10-01
      ALARM STATUS       = No Alarms.
      SCRSET  = ----
      GWSA    = ----
      GWSM    = ----
      GWSD    = ----
      SLC SLK     SST          SLC SLK     SST     
      0   1207,A  Avail        8   ----,-  UEQ     
      1   1203,A  Avail        9   ----,-  UEQ     
      2   1103,B  LPBK         10  ----,-  UEQ     
      3   ----,-  UEQ          11  ----,-  UEQ     
      4   ----,-  UEQ          12  ----,-  UEQ     
      5   ----,-  UEQ          13  ----,-  UEQ     
      6   ----,-  UEQ          14  ----,-  UEQ     
      7   ----,-  UEQ          15  ----,-  UEQ     
    Command Completed. 
;

This example shows the output for an adjacent point code when the MLS feature turned on:

rept-stat-ls:apc=1-1-2


    eagle10207 07-07-23 10:09:59 EST  EAGLE 37.5.0
 
    APCA   =   001-001-002 
    LSN           SPCA          PST           SST       AST
    ls11234567    001-005-003   OOS-MT        Prohibit  GWS
    ls11345678    004-008-002   OOS-MT        Prohibit  -----
    ls113456      014-012-094   OOS-MT        Prohibit  -----
    Command Completed. 
;

This example shows the output when possible duplication of adjacent point code values occurs when the MLS feature is turned on:

rept-stat-ls


    eagle10207 07-07-23 10:09:59 EST  EAGLE 37.5.0

    LSN           APCA          PST           SST       AST
    ls11234567    001-001-002   OOS-MT        Prohibit  GWS
    ls11345678    001-001-002   OOS-MT        Prohibit  -----
    ls11345679    001-001-004   OOS-MT        Idle      -----
    ls1134567     001-001-005   OOS-MT        Prohibit  -----
    ls113456      001-001-002   OOS-MT        Prohibit  -----
    ls11345     p-001-001-007   OOS-MT        Prohibit  GWS
    ls113467      001-001-008   OOS-MT        Prohibit  -----
    ls1134      p-001-001-009   OOS-MT        Prohibit  -----
    ls987         009-008-007   OOS-MT        Idle      -----
    z             009-008-009   OOS-MT        Idle      -----
    cap8          008-008-008   OOS-MT        Idle      ----- 
    LSN           APCN          PST           SST       AST
    lsnational  s-09-14-05-3-ab OOS-MT        Idle      -----                 
    LSN           APCN24        PST           SST       AST   
    LSN           APCI          PST           SST       AST

This example shows the output when the Proxy Point Code feature is enabled:

rept-stat-ls:lsn=lsnstpa


    tekelecstp 08-02-29 11:05:47 EST  EAGLE 38.0.0
     LSN           APCA          PST           SST       AST
     lsnstpa       110-15-08     IS-NR         Allowed   -----
        PPCA   =    100-12-04
        ALARM STATUS       = No Alarms.
        SCRSET  = ----
        GWSA    = ----
        GWSM    = ----
        GWSD    = ----
        SLC SLK     SST          SLC SLK     SST     
        0   1207,A  Avail        8   ----,-  UEQ     
        1   1203,A  Avail        9   ----,-  UEQ     
        2   1103,B  LPBK         10  ----,-  UEQ     
        3   ----,-  UEQ          11  ----,-  UEQ     
        4   ----,-  UEQ          12  ----,-  UEQ     
        5   ----,-  UEQ          13  ----,-  UEQ     
        6   ----,-  UEQ          14  ----,-  UEQ     
        7   ----,-  UEQ          15  ----,-  UEQ     
;

This example shows the output for proxy linksets using a specified adjacent point code. The MLS feature must be turned on to retrieve information for an adjacent point code.

rept-stat-ls:apc=1-1-2


    tekelecstp 07-03-29 11:05:47 EST  EAGLE 37.5.0
    
    APCA   =   001-001-002 
    LSN           PPCA          PST           SST       AST
    ls11234567    001-005-003   OOS-MT        Prohibit  GWS
    ls11345678    004-008-002   OOS-MT        Prohibit  -----
    ls113456      014-012-094   OOS-MT        Prohibit  ----- 
;

This example shows the ASP state for IPSG-M3UA linksets state when the linkset is specified:

rept-stat-ls:lsn=ls1305a


    tekelecstp 08-01-29 18:15:20 EST  EAGLE 38.0.0
    LSN           APCA             PST           SST       AST
    ls1305a       005-213-000      IS-NR         Allowed   -----
      SPCA    = ----------------
      ALARM STATUS       = No Alarms.
      SCRSET  = ----
      GWSA    = ----
      GWSM    = ----
      GWSD    = ----
      SLC SLK      SST       ASP STATE   SLC SLK      SST       ASP STATE
      0   1305,A   Avail     ACTIVE      8   ----,--- UEQ       --------
      1   1305,A1  Unavail   DOWN        9   ----,--- UEQ       --------
      2   ----,--- UEQ       --------    10  ----,--- UEQ       --------
      3   ----,--- UEQ       --------    11  ----,--- UEQ       --------
      4   ----,--- UEQ       --------    12  ----,--- UEQ       --------
      5   ----,--- UEQ       --------    13  ----,--- UEQ       --------
      6   ----,--- UEQ       --------    14  ----,--- UEQ       --------
      7   ----,--- UEQ       --------    15  ----,--- UEQ       --------

    Command Completed. 
;

This example shows the output when some linksets contain adjacent point codes if J7 support feature is enabled.

rept-stat-ls


    tekelecstp 02-03-20 21:22:04 EST  EAGLE 31.12.0
    LSN            APCA             PST           SST       AST
        
    LSN            APCN             PST           SST       AST
    lsnational   s-09-14-05-3-ab    OOS-MT        Idle      -----
                
    LSN            APCN24           PST           SST       AST

    LSN            APCI             PST           SST       AST

    LSN            APCN16           PST            SST      AST
    lsnational     121-003-015      OOS-MT         Idle    -----

    Command Completed. 
;

Legend

LSN—Name of the linkset
APCA/APCI/APCN/APCN24/APCN16—Adjacent point code of the linkset (ANSI, ITU-I, ITU-N, ITU-N 24-bit, ITU-N 16-bit)
SPCA/SPCI/SPCN/SPCN24—Secondary point code of the linkset (ANSI, ITU-I, ITU-N, ITU-N 24-bit)
PST—Primary state of the linkset. See Possible Values for PST/SST/AST.
SST—Secondary state of the linkset. See Possible Values for PST/SST/AST.
AST—Associated state of the linkset. See Possible Values for PST/SST/AST.
ALARM STATUS—List of trouble text alarm messages that have been generated for the specified card
SCRN—Name of the gateway screening screen set associated with the linkset
GWSA—Shows whether gateway screening is used for the specified linkset
GWSM—Shows whether gateway screening messaging is turned on for the specified linkset
GWSD—Shows whether discarding of MSUs that bypass the gateway screening function due to loadshedding is turned on
SLC—Signaling link codes associated with the links in the specified linkset
SLK—Signaling links in the linkset, shown by the card location containing the signaling link and the port on the card containing the signaling link
PPCA/PPCI/PPCN/PPCN24/PPCN16—Proxy point code of the linkset (ANSI, ITU-I, ITU-N, ITU-N 24-bit, ITU-N 16-bit)
ASP STATE—State of AS associated with each signaling link of the IPSG-M3UA linkset. The states displayed are: ACTIVE, INACTIVE, or DOWN.

4.417 rept-stat-ls