Release Notes for Oracle Health Insurance Claims Adjudication Release 3.21.2.0.0
This document contains the release notes for Oracle Health Insurance Claims Adjudication Release 3.21.2.0.0.
Version compatibility: Oracle Health Insurance Claims Adjudication Release 3.21.2.x is only compatible with other Oracle Health Insurance applications release version 3.21.2.x unless explicitly stated otherwise. |
In accordance with the OHI error correction policy (Document 1494031.1 on My Oracle Support), error correction support will be provided for this release and the previous two releases. |
Enhancements
ID | Summary | Description | Included in Patch |
---|---|---|---|
NXT-19935 |
Upgrade / Downgrade Wait Period Evaluation |
Some customers use a product ranking (level) to determine the relative cover of a product. The claims flow logic uses this ranking to determine the waiting period to serve in circumstances of upgrade and downgrade. In some cases this product level ranking is not sufficient granularity and leads to leakage. This change allows waiting periods for upgrade/downgrade situation based on the potential amount covered including limit considerations. This is then used to determine the product to adjudicate under (based on waiting periods served and if a downgrade) and adjudication occurs normally. This is only required when there are waiting periods to be served. Once a product is found in the history which is out of waiting periods then there is no need to calculate amounts covered for products held prior to that one. |
|
NXT-20585 |
JET - Reference Sheet Page |
A UI page to manage reference sheets is added to Claims, Policies, and Capitation JET application. |
|
NXT-20626 |
Claims processing should provide notification callback possibility |
Claim processing is a long running async process that is not backed up by a notification callback. The only way to know that the process is finished successfully or not, is to poll for its status. It would be beneficial to provide a notification capability at the end of the process whether ending in success or in failure. This also has to cater for the situation that a claim halts with a technical error. Solution: Successful task completion can be notified to the external system by using claim event rules. However, claim event rules can not be used to monitor technical error(s). Therefore the claims flow is extended with the option to send a notification to an endpoint when the flow has raised a technical error. The endpoint definition is stored as a system property. If the system property is not defined or of it has no value the flow will not send a notification. If it has a value, it will send the notification to this endpoint. The system property is: ohi.CLAIM_FLOW_ERROR.endpoint.request |
3.21.1.0.1 |
NXT-21417 |
PHI Audit logs must be written in the same transaction as PHI / PII access occurs |
PHI logs were initially written to a local buffer file before being persisted in the database. For compliance it is required to persist PHI audit logs in the same transaction as PHI access occurs. If system property 'ohi.logging.target' is set to value 'database', OHI applications persist PHI access in the database as part of the HTTP API or ADF UI request in which PHI data was accessed. If the value for system property 'ohi.logging.target' is set to 'log', which is also the default if no value is specified, then PHI access continues to be logged using any configured Logback Appender for which the PHI filter is applied. |
|
NXT-21616 |
Jet: Contract Reference Page |
A UI page to maintain contract references is added to claims JET application |
|
NXT-21618 |
Configuration pages to maintain baskets, diagnosis, and service types |
The following new pages are added to the claims JET application: Baskets, Diagnosis, Diagnosis Groups, Service Types, Tag Types |
|
NXT-21646 |
Recalculation of Benefits |
This enhancement introduces the following capabilities:
|
|
NXT-21647 |
Reprocess a claim automatically |
This enhancement introduces the ability to send a claim back through the claims flow without having to pend for manual intervention when the external system business rules make an update to the claim. Using dylo functionality, changes can be identified which will trigger the claim to reprocess, bringing the claim back to initial status automatically. This enhancement also makes it possible to control the sequence in which external intervention rules are evaluated by the system. |
|
NXT-21648 |
Additional Predefined Methods Accessible in Callout Dynamic Logic |
New Predefined Methods are made available on Claim and Claim Line: claimLine.removeClaimLineModifier claimLine.addClaimLineModifier claimLine.removeClaimLineDiagnosis claimLine.addClaimLineDiagnosis claim.removeClaimDiagnosis claim.addClaimDiagnosis claim.switchPrimaryClaimDiagnosis claimLine.switchPrimaryClaimLineDiagnosis |
|
NXT-21672 |
Overriding Messages |
This enhancement introduces a new type of message that can be overturned without having to reprocess the claim. Like INFORMATIVE messages, DENY messages do not prevent any processing step executing. In the “Set Claim and Claim Line Status†step in Adjudication, Deny messages are treated as follows:
|
|
NXT-21687 |
Extend the length of Relation and Provider Identifier |
This enhancement focuses on increasing the length of the Relation and Provider Identifiers from 30 to 100 char.Increased the length of the Identifier attribute from 30 to 100 char on the Relation Identifier entity. Increased the length of the Identifier attribute from 30 to 100 char on the Provider Identifier entity. |
|
NXT-21768 |
Ability to set Dynamic Fields on Claim Line Limits |
Ability to set Dynamic Fields on Claim Line Limits from Derivation Rule dynamic logic |
|
NXT-21841 |
Cancel Reason Messages |
This enhancement gives the user a flexibility of attaching their own specific cancel reason message along with the already existing claim cancel message (CLA-HTTP-002) in the request. This enables the user to know which claim got cancelled and why it got cancelled. |
|
NXT-21842 |
Product Service Consumption Integration Point |
This integration point returns limit max and consumption by service option service code. The member would search by service option and date. The service option for the member’s product may be included in a combination limit along with other service options. All service options that share a combination limit with the search service option are returned in the response in context of the combination limit. |
|
NXT-21844 |
Benefit other Condition Message CLA-FL-BENS-026 should also include benefit specification code as an argument. |
This enhancement enables the user to identify why a benefit specification was rejected, in case multiple conditions are used in the selection process by adding Benefit Specification code to Benefit condition message |
|
NXT-22306 |
Extend CTR Claim Line Coverage with productFamilyCode |
It is required to store productFamilyCode on CtrClaimLineCoverage. This is needed to lookup the benefit type for the Fusion Financial Benefit /Contribution Type Segment. CTR Claim line Coverage entity has been extended with an optional attribute productFamilyCode. Added an optional attribute productFamilyCode to the Financial Transaction Detail entity. Dynamic Logic-Updated the Transfer Claim Line Coverages logic with productFamilyCode. Also, Updated the financial transaction details logic with productFamilyCode. |
|
NXT-22420 |
Store cancellation RRN on the claim |
This enhancement makes it possible to set the provider reference on the claim when the claim is cancelled |
|
OIG-1550 |
JET UI Page: Configuration Migration Sets |
JET UI page to create and maintain configuration migration sets is added to claims, policy, and OIG applications. |
|
POL-6890 |
Retire Address Type Domain |
In release 3.21.1, the fixed address type domain was replaced by a user configurable address type domain as a separate entity. The integration points and API supported both versions. From this release, the type attribute is removed. |
|
POL-7036 |
LOV enhancement : Search on all the fields by default, the gear (for field selection) is made optional. |
In JET application, LOVs have a field selection feature, the search is then performed on the selected fields. This selection feature is made optional. By default search will be enabled on all the properties. To enable this feature property propertySelection must be set to true in the lov floorplans. |
|
POL-7040 |
Ability to make search criteria for quick search and LOVs mandatory |
With this enhancement, it is possible to make criterion mandatory for quick search in pages and LOV search. This can be achieved by setting criteriaMandatory property in quick search / referenced property configuration to true. |
|
POL-7124 |
Theming Changes to JET application |
Oracle Javascript Extension Tool Kit ( JET) support for Alta Theme is deprecated with newer Oracle JET versions. A new theme - Redwood is now introduced from Oracle JET version 9. This theme is designed for better usability and responsiveness in comparison to Alta. In addition, to make use of newer and better components and features introduced with newer JET versions, it is important for the OHI application to be continuously on the latest version of JET, and therefore OHI javascript-based applications are now migrated to a new theme. Key changes :
Additional configuration requirement: For Oracle Health Insurance applications that feature a JET UI, the user’s browser client needs to be able to access the Oracle Content Delivery Network (CDN). Oracle recommends referencing the bundles configuration script file on Oracle CDN because Oracle maintains the configuration for each release. Pointing the application to the current bundles configuration ensures that the application runs with the latest supported library and module versions. Oracle Health Insurance applications follow these recommendations. Make sure that the user’s browser clients can access CDN URIs that start with https://static.oracle.com/cdn. If CDN is not accessible from the user’s browser client, the JET UI will not work. |
|
POL-7238 |
Ability to specify whether a floorplan applies for create mode or not |
Before this release, all the floorplans that are configured are shown under the "add"/"create" options. The user can make use of tagging to select appropriate detail object plans but it is not possible to further filter out floorplans that should be shown under the "add" action. This enhancement makes it possible that the floor plan is available for view/edit, but not for action create. |
|
POL-7886 |
Extend dynamic Fields on Relation |
The number of supported dynamic fields on relations entity are now increased from Small to Medium (which has - among others - 20 character dynamic fields) |
Configuration Properties
Ref | Action | Subject | Description |
---|---|---|---|
NXT-20626 |
Added |
ohi.CLAIM_FLOW_ERROR.endpoint.request |
If the claims flow raises a technical error, the system will send a notification to the endpoint specified in the ohi.CLAIM_FLOW_ERROR.endpoint.request system property. If the system property or the value of that system property is not set, then the flow will not send a notification. Note that this is not a new system property. The system uses the allready existing ohi.{0}.endpoint.request system property for this where {0} = CLAIM_FLOW_ERROR. |
NXT-21417 |
Added |
ohi.logging.target |
Defines the target for logging PHI access. Possible values are 'database', for logging to the database, or 'log' for logging PHI access to the Logback appender configured for it. Default value is 'log'. |
OIG-1550 |
Added |
ohi.jsui.cmt.payload.max.items.limit |
Defines the maximum number of items that can be included in the payload. Property: ohi.jsui.cmt.payload.max.items.limit Default: 300 |
Web Services
Ref | Action | Subject | Description |
---|---|---|---|
NXT-19935 |
Added |
generic/waiverreasons |
New HTTP API Resource for defining Waiver Reasons |
NXT-19935 |
Added |
generic/coveredservicetiers |
New HTTP API Resource for defining Covered Service Tiers |
NXT-19935 |
Added |
generic/personcoveredservices |
New HTTP API Resource for getting Person Covered Services |
NXT-19935 |
Modified |
CL0155: Claims In integration point |
Removed list of policy waiting period start dates from <enrollment>, removed coverage level from <product> |
NXT-19935 |
Modified |
CL0140: enrollment Integration point |
Removed list of policy waiting period start dates, removed coverage level from <product> element, added indicator suspended to the policy product |
NXT-19935 |
Modified |
CL0159: Claims Out Integration Point |
Added the <ctrClaimLine AppliedParameterList> element to the <ctrClaimLineList> |
NXT-19935 |
Modified |
generic/persons |
Added Person Covered Service element |
NXT-19935 |
Removed |
generic/policywaitingperiodstartdate |
Removed the HTTP API Resorurce |
NXT-20585 |
Modified |
referencesheetlines API |
Added an operation to support collection patch |
NXT-21417 |
Modified |
logphievents API |
The following attributes are removed: eventDoc; eventTimestamp; eventLevel; eventThread; contextItemId; contextItemType |
NXT-21687 |
Modified |
Provider Integration Point |
The length of identifier attribute of provider identifier is extended to 100 characters |
NXT-21687 |
Modified |
Relation Integration Point |
The length of identifier attribute of relation identifier is extended to 100 characters |
NXT-21687 |
Modified |
Policy In Integration Point |
The length of identifier attribute of relation identifier is extended to 100 characters |
NXT-21841 |
Modified |
Cancel HTTP |
Updated the cancel logic |
NXT-21842 |
Added |
productserviceconsumptions IP |
New integration point |
NXT-21842 |
Modified |
/api/generic/limits |
Service Option Service Code added |
NXT-22306 |
Modified |
financialtransactiondetails API |
Added productFamilyCode attribute to financialtransactiondetails API |
POL-6890 |
Modified |
Relation Integration Point |
The type attribute on address is removed |
POL-6890 |
Modified |
addresses API |
The type attribute on address is removed |
POL-6890 |
Modified |
relations API |
The type attribute is removed |
POL-7238 |
Modified |
floorplans API |
Added createEnabled attribute |
Data Conversion
Ref | Action | Subject | Description |
---|---|---|---|
NXT-21417 |
Modified |
Log PHI Events |
Newly added attributes are derived from event_doc |
NXT-21647 |
Modified |
Pend Reasons |
Reprocess indicator for existing pend reasons is set to N |
NXT-21647 |
Modified |
External Intervention Rules |
Sequence is set to 1 for all existing external intervention rules |
NXT-21841 |
Added |
Cancel Origin |
Added new origin 'CANCEL' to the domain MESSAGE ORIGIN. |
POL-7238 |
Modified |
Floor Plan |
IND_CREATE_ENABLED is set to 'Y' for all floor plans with template set to 'HIERARCHICAL RECURSIVE' |
Dynamic Logic
Ref | Action | Subject | Description |
---|---|---|---|
NXT-19935 |
Modified |
waiting period start date |
The signature for the waiting period start date dynamic logic function has changed |
NXT-21646 |
Added |
claim.setRecalculateBenefits |
The claim is flagged for recalculation, the actual recalculation takes place in the Adjudication step of the claims flow. |
NXT-21646 |
Added |
claimLineRuleCoverage.setAmountManually |
This predefined method sets the amount of a claim line coverage and prevents the value from updates during the recalculation of benefits. |
NXT-21648 |
Added |
claimLine.removeClaimLineModifier |
Predefined method to remove claim line modifier |
NXT-21648 |
Added |
claimLine.addClaimLineModifier |
Predefined method to add claim line modifier |
NXT-21648 |
Added |
claimLine.removeClaimLineDiagnosis |
Predefined method to remove claim line diagnosis |
NXT-21648 |
Added |
claimLine.addClaimLineDiagnosis |
Predefined method to add claim line diagnosis |
NXT-21648 |
Added |
claim.addClaimDiagnosis |
Predefined method to add claim diagnosis |
NXT-21648 |
Added |
claimLine.switchPrimaryClaimLineDiagnosis |
Predefined method to swap primary claim line diagnosis with secondary |
NXT-21648 |
Added |
claim.switchPrimaryClaimDiagnosis |
Predefined method to swap claim diagnosis with secondary |
NXT-21648 |
Added |
claim.removeClaimDiagnosis |
Predefined method to remove claim diagnosis |
NXT-22306 |
Modified |
Financial transaction details logic |
Updated the financial transaction details logic with productFamilyCode. |
NXT-22306 |
Modified |
Transfer Claim Line Coverages logic |
Updated the Transfer Claim Line Coverages logic with productFamilyCode. |
UI Changes
Ref | Action | Subject | Description |
---|---|---|---|
NXT-19935 |
Added |
FN0080: Waiver Reasons Page |
Added Waiver Reasons JET Page |
NXT-19935 |
Added |
FN0081: Covered Service Tier Page |
Added Covered Service Tier JET Page |
NXT-19935 |
Modified |
CL0007: Waiting Period Regimes |
Added new column 'Message (Continue)'. |
NXT-19935 |
Modified |
RM0012: Persons Page |
Added person covered service tab to JET persons page |
NXT-20585 |
Added |
FN0044 Reference Sheets |
Reference Sheets page |
NXT-21616 |
Added |
CL0112 Contract References |
Contract Reference JET page |
NXT-21618 |
Added |
Baskets, Diagnosis, Diagnosis groups, Tag types, Service Types |
Added Baskets, Diagnosis, Diagnosis groups, Tag types, Service Types pages |
NXT-21647 |
Modified |
CL0045 External intervention rules |
'Sequence' field added. |
NXT-21647 |
Modified |
CL0036 Setup pend reasons |
"Reprocess" checkbox added. |
NXT-21672 |
Modified |
Claim Detailed Dialogs |
Claim and Claim Line detail dialogs show new Message Severity 'Deny'. Deny Message is shown as Overturned when 'overturned' is true. |
NXT-21672 |
Modified |
FN0002 Messages |
New Message Severity 'Deny' added. |
NXT-21842 |
Modified |
CL0003 : Setup Adjudication Limits |
Service Option Service Code added to the overflow of the Adjudication Limits. |
NXT-22273 |
Modified |
Reference Sheets |
Claims application was not showing the Reference Sheets option on menu option when user has only Reference Sheets Function access. It is now available. |
NXT-22340 |
Modified |
Conditional display properties |
Conditional display properties are configured to work with flexcode based fields. |
OIG-1550 |
Added |
Configuration Migration Sets |
Configuration Migration Sets page added |
POL-7036 |
Modified |
All JET pages having LOV’s |
By default search on all properties for an lov |
POL-7040 |
Modified |
All JET pages having Quick Search and LOV’s |
Added criteriaMandatory property in Quick Search and LOV component |
POL-7238 |
Modified |
Floorplan |
Floorplans with createEnabled set to false are not shown as an option under "create" (top-level") or "add" detail level |
Breaking Changes
Ref | Action | Subject | Description |
---|---|---|---|
NXT-21417 |
Modified |
log_phi_events |
Column event_doc is removed |
POL-6890 |
Modified |
Relation Integration Point |
The type attribute on address is removed |
POL-6890 |
Modified |
addresses API |
The type attribute is removed |
POL-6890 |
Modified |
relations API |
The type attribute on address is removed |
POL-7124 |
Added |
POL-7124 |
For Oracle Health Insurance applications that feature a JET UI, the user’s browser client needs to be able to access the Oracle Content Delivery Network (CDN). Oracle recommends referencing the bundles configuration script file on Oracle CDN because Oracle maintains the configuration for each release. Pointing the application to the current bundles configuration ensures that the application runs with the latest supported library and module versions. Oracle Health Insurance applications follow these recommendations. Make sure that the user’s browser clients can access CDN URIs that start with https://static.oracle.com/cdn. If CDN is not accessible from the user’s browser client, the JET UI will not work. |
Bug Fixes
BugDB | SR | Internal | BP | Summary |
---|---|---|---|---|
31173021 |
3-20362370061 |
NXT-20395 |
ORA-01555 Errors for sqlid gc0udub5tk6vd |
|
Description: |
The database alert log shows intermittent ORA-01555 errors for sqlid gc0udub5tk6vd. This seems to happen when dequeueing messages from AQ. This alert does not impact OHI functionality. |
|||
Resolution: |
Fixed the navigation option of dbms_aq package call done from task_queue.pkg to avoid ora-01555 error in alert log. |
|||
31931061 |
3-24111363781 |
NXT-21171 |
Flexcode field not saving on claim save |
|
Description: |
While updating flexcode (yes/no) on claimline, in certain scenario’s the new value of the field is not being saved. This happens typically when multiple claims lines are updated. |
|||
Resolution: |
Flex Code fields are saved correctly now even when multiple claim lines are updated. |
|||
32029725 |
3-24571978961 |
NXT-21318 |
LOV not displayed for certain flexcodes for Dynamic records. |
|
Description: |
In the Dynamic Records popup, LOV is not displayed for flex codes field. |
|||
Resolution: |
Fixed the refresh issue. Now user can launch and select value from LOV for flex code field. |
|||
32139431 |
3-24383895551 |
NXT-21456 |
CMT data set containing flex codes systems and flex codes take more time than 3.20.2.0.0 |
|
Description: |
CMT data set containing flex codes systems and flex codes take more time than 3.20.2.0.0 release. |
|||
Resolution: |
The performance of importing flex codes through CMT is optimized now. |
|||
32219860 |
3-24628242821 |
NXT-21650 |
Applied provider pricing clause on claim line does not change when product category is changed |
|
Description: |
Changing the associated Product with the Product Category does not reflect a change in the applied provider pricing clause on the claim line. |
|||
Resolution: |
When a Product in the Product Category Dimensions is changed, the claim line is now correctly calculating the Applied Provider Pricing Clause on unfinalize and submit. |
|||
32288599 |
3-24626202211 |
NXT-21757 |
All the records are not shown for Flexcodes LOV |
|
Description: |
When a Flex Code LOV is opened on Enter Claims page, all the records are not shown. All the records are shown only when we select any row in the LOV. This issue is seen only on Chrome and not on Firefox. |
|||
Resolution: |
All the records of Flex Code LOV are shown as expected on Enter Claims page. A fix is made to enable resizing of the dialogue. |
|||
32477329 |
NXT-22009 |
CMT process hangs if interrupted and does not allow running any new CMT process |
||
Description: |
When CMT fails the job can be stuck within the database which prevents the user from running another CMT. |
|||
Resolution: |
The resolution was mostly done on transactional grounds of the cleanup services. Post the resolution, if CMT process is interrupted due to any reason, it can be started again. |
|||
32578470 |
NXT-22037 |
User is able to update the enabled atribute of an identifier even after not having the update access |
||
Description: |
For both provider and relation identifiers it is not possible to update the identifier itself when a user is not having update access, however it is possible to update other attributes, like enabled and/or dynamic fields/records. This should not be allowed. |
|||
Resolution: |
Removed restriction on update of identifier only: it now checks whether relation identifier/provider identifier is updated regardless. |
|||
32501857 |
3-25047894481 |
NXT-22044 |
Claims Reprocess Integration Point should mark the existing pend reasons as resolved |
|
Description: |
Pend resolution details do not show resolved_date_time, resolved_by_user etc in the pend reason history when the pend is resolved during claims reprocess via 'api/claimsreprocess and api/claimsreprocesscriteria' IP. |
|||
Resolution: |
Now the existing pend reasons are marked as resolved with timestamp using the information from the user context. This is logged in user for online reprocessing request and system user for batch reprocessing requests. |
|||
32525568 |
3-24978902091 |
NXT-22093 |
Usage names with a reserved SQL word results in view generation failure |
|
Description: |
A usage name like "level" (which is a SQL reserved word) results in a failure in the view generator for the table where this usage is used. |
|||
Resolution: |
Usage name like "level" is generated in the view of the table. |
|||
32554859 |
3-25162308611 |
NXT-22158 |
Duplicating a claim line which has a value for an Overriding Claim Line parameter gives error |
|
Description: |
Duplicating a claim line which has a value for an Overriding Claim Line parameter gives the below error :
GEN-ORA-00001: THIS CLAIM LINE OVERRIDE ALREADY EXISTS |
|||
Resolution: |
Duplicating a claim line which has a value for an overriding Claim Line parameter does not give error anymore. Now if a claim line has values for any of the below fields, then those values will not be available in the new duplicated line. |
|||
32581643 |
NXT-22166 |
Create-form link shall not be available for baseviews, baseviewgeneration and baseviewcolumn resources |
||
Description: |
Before this release, create-form link is visible for baseviews, baseviewgeneration and baseviewcolumn resources. Also baseviewerrors is not listed as a resource. |
|||
Resolution: |
Create-form links for baseviews, baseviewgeneration and baseviewcolumn resources are removed. Baseviewerrors resource is now listed as a resource. |
|||
32574117 |
NXT-22182 |
Some logfilesetspecifications stay on specified status |
||
Description: |
If no log messages are applicable for the specified logfilesetspecification, the logfilesetspecification stays on S(pecified), and no error is present. Also specifications with status S are not cleaned. The required fields of logfilesetspecifications generic resource metadata show following not required fields: errorMessage, fileSetStatus and dataFileSet The fileSetStatus x-oi-meaning shows "null" instead of "Specified", Processed", "Errored" The x-oi-meaning for logLevel and logType shows "null" |
|||
Resolution: |
Logfilesetspecifications are set to status processed when no events are present. These specifications are cleaned up as well. The metadata required fields only shows required fields and x-oi-meaning fields are filled. |
|||
32592844 |
3-25255922421 |
NXT-22212 |
CLA-FL-BENS-066 error is attached to claimline even when policy product exists |
|
Description: |
When there are multiple policy products for the same product, application intermittently picks up the wrong policy product and this causes CLA-FL-BENS-066 error. |
|||
Resolution: |
The product is not reselected when previous products are added. This avoids CLA-FL-BENS-066 error. |
|||
32594377 |
3-25194634741 |
NXT-22217 |
The urls to collect data from source system for CMT import, should be based on the request url |
|
Description: |
Subsequent requests made to collect data from source system for CMT import is not based on the request url. |
|||
Resolution: |
If a rest service asks for metadata information, then it is now assumed to always obey the header of request URL. So, any subsequent requests made are now based on the request URL. |
|||
32601871 |
3-24591194951 |
NXT-22237 |
CMT export takes more time in retry step if the statistics of table OHI$CFG_MIGR_MARSHALLED_ITEMS is not up-to date. |
|
Description: |
When there are a lot of records written to OHI$DATA_SET_PROCESS_FAILURES (if concurrency is more and/or if the same top level item is referenced by multiple other top level items), then retrying the failed records from OHI$DATA_SET_PROCESS_FAILURES table, the query on table OHI$CFG_MIGR_MARSHALLED_ITEMS uses inefficient access path because the statistics on the table OHI$CFG_MIGR_MARSHALLED_ITEMS is not up-to date. |
|||
Resolution: |
Statistics of the table OHI$CFG_MIGR_MARSHALLED_ITEMS is kept up-to-date now in CMT export process. |
|||
32603647 |
3-25327125711 |
NXT-22238 |
Using a diagnosis group in benefit specification gives CLA-FL-BENS-019 ERROR |
|
Description: |
If two benefit specification uses same diagnosis group with different diagnosis type, only the first benefit specification is considered. |
|||
Resolution: |
Benefit specification using same diagnosis group but different diagnosis type will now be considered |
|||
32835810 |
NXT-22256 |
Claims out activity notification misses file link |
||
Description: |
The notification for claims out activity notification (configured with ohi.claimsout.datafile.notification.endpoint) does not contain the expect 'file' link for the data file. |
|||
Resolution: |
The 'file' reference link is available in the notification. |
|||
32626104 |
3-25383612121 |
NXT-22260 |
Only 1 limit exceed message is raised when multiple cover limits are exceeded |
|
Description: |
When multiple cover limit are exceeded, no other cover limit message is shown after getting one fatal message. |
|||
Resolution: |
Now all the messages will be shown in case of multiple cover limits being exceeded. |
|||
32626154 |
3-25359046661 |
NXT-22261 |
Currency conversion (payment) signature executed once per claim |
|
Description: |
Exchange rates are calculated incorrectly if the dates on claims lines differ from the last claim line. Conversion (Payment) signature dynamic logic is only executed once per claim for claim line with the most recent start date, instead of per claim line. |
|||
Resolution: |
Exchange rates are now calculated correctly for each claim line with different dates. Conversion (Payment) signature dynamic logic is executed for claim lines based on distinct start date, instead of once per claim. |
|||
32635008 |
3-25352091891 |
NXT-22273 |
Claims application not Showing the Reference Sheets option on menu option |
|
Description: |
In claims application, the Reference Sheet option is not visible on the menu item under the system when a user has only Reference sheets function access. |
|||
Resolution: |
Reference sheet option is now available in the menu items in System when user has only Reference Sheets Function access . |
|||
32638211 |
NXT-22284 |
CMT-Code and Descriptions fields values were getting cleared While Creating new set With Multiple configuration Items with Exclude Option. |
||
Description: |
Code and Descriptions fields values were getting cleared if we select an exclude option and then select something in the Configuration Items |
|||
Resolution: |
partial trigger was not handled properly , now the ui doesn’t get reloaded partially every time we select the new Configuration item |
|||
32656493 |
3-25194388651 |
NXT-22301 |
Benefits task should not fail with NPE if incorrect subscription date is returned by the enrollment response |
|
Description: |
Enrollment Information regarding contracts of some claims is outside the scope of the claimLine service date which leads to null pointer exception (NPE) at benefits task. Reprocessing these claims by sending them again with claims in and overwrite flag resolves the issue. But , NPE still need to be avoided . |
|||
Resolution: |
A new message "CLA-FL-BENS-068" has been introduced for such scenarios. This will be attached to claim line message with message description as "Unable to complete benefit selection successfully". Also, an error message will be logged in log file . |
|||
32663728 |
3-25194388651 |
NXT-22322 |
NPE in benefits step is seen where claim has claimline(s) having case definition details as ancillary lines. |
|
Description: |
When a claim has multiple policy product including history with same product, there are multiple product benefit specifications for this product because initial selection happens based on the policy product and not on the product. In OHI, if a claimline is an ancillary detail to the case definition attached to the ben spec, then those lines are deleted. Since there are multiple product benefit specifications selected for the same benefit specification, when second time the same benefit spec is processed, it again tries to delete ancillary lines which are now no longer there, and hence gets Null Pointer Exception (NPE). |
|||
Resolution: |
One product is selected only once. The benefitspecification selection cache is extended to have product id as key and not policy product id . |
|||
32663776 |
3-25194388651 |
NXT-22328 |
Claim processing fails with NPE in finalize task when consumptions are finalized before periods |
|
Description: |
When there are no existing provider limit counter periods for the provider limit counter, then application returns null which cause Null pointer exception and claim gets stuck. However, there are preliminary provider limit counter periods that should be finalized before finalizing consumption. So sometimes that doesn’t happen in the same order as intended, which is periods before consumption. |
|||
Resolution: |
It is ensured that periods are finalized before consumption and that those finalized periods are available to be queried while finalizing consumption. Also, null check is added incase if no periods are found. |
|||
32869636 |
NXT-22340 |
Conditional display triggered on flexcodes based fields is not working |
||
Description: |
Conditional display triggered on flexcodes based fields is not working. |
|||
Resolution: |
User will now be able to configure conditional display properties on flexcode based fields. |
|||
32682923 |
3-25228475161 |
NXT-22343 |
Claims search in GUI taking long time. |
|
Description: |
Queries having call for table(ohi_util_pkg.split_ids(:1)) calculates wrong cardinality estimated rows as 8k due to which query uses poor plan. As a result search query takes long time. |
|||
Resolution: |
This issue is fixed by implementing extensible optimizer feature available from Oracle DB 12.2 onwards. Query performance is now improved. |
|||
32735599 |
3-25577949681 |
NXT-22406 |
Supported paths in claimscalloutresponse IP metadata doesn’t work. |
|
Description: |
Supported paths in claimscalloutresponse IP returns "Not Found" because paths in metadata doesn’t contain "/claimscalloutresponse" prefixed in them . Example - It is /custom instead of /claimscalloutresponse/custom in the metadata . |
|||
Resolution: |
All the supported paths are prefixed with "/claimscalloutresponse" now. This fixes the 'Not Found' error in claimscalloutresponse IP. |
|||
32766599 |
3-25664580391 |
NXT-22426 |
CLA-IP-ENRO-009 error is thrown when the families in the enrollment response have a time gap between them |
|
Description: |
When the families in the enrollment response have a time gap between them, CLA-IP-ENRO-009 error is thrown even though a family code is present for all days on which the policy product is enrolled. |
|||
Resolution: |
Even if there is gap between the end date on previous line(family) and start date on current line (family) in the enrollment response, current family line will be selected provided product is valid in the specified period. |
|||
32768782 |
3-25455694151 |
NXT-22427 |
Scrollbar resets when changing the method/rule in DPPC page. |
|
Description: |
Scrollbar and Start date reset when changing method/rule in DPPC page. |
|||
Resolution: |
The scrollbar and the start date do not reset now when the value for method/rule is changed in DPPC page. |
|||
32796319 |
3-25530847051 |
NXT-22454 |
It should be allowed to create more than 999 reference sheets |
|
Description: |
Reference sheets sequence has a max limit of 999 after which new reference sheets cannot be created. Deleting a few reference sheets also doesn’t help. |
|||
Resolution: |
Able to add more than 999 Reference Sheets with the fix in place. |
|||
32804829 |
3-25726570421 |
NXT-22492 |
Duplicating a claim line which has a value for an Overriding Claim Line Parameter gives error. |
|
Description: |
Duplicating a claim line which has a value for an Overriding Claim Line Parameter gives error. |
|||
Resolution: |
Duplicating a claim line which has a value for the overriding claim line parameter does not give any error now and it saves correctly. |
|||
32805296 |
3-25694698761 |
NXT-22495 |
SEND_FINANCIAL_MESSAGES activity type should be allowed to be recovered |
|
Description: |
When claims fail in delivery to OHI, a new batch with the identifier "SEND_FIN_MESSAGE" is created which should allow re-trigger but is not available as option currently. The icon to re-trigger only appears when activity is in one the failure states and is a top level activity |
|||
Resolution: |
The icon to re-trigger is now available when the activity is in one of the failure states and does not have origin spawned or when it in one of the failure states and is a top level activity. |
|||
32842738 |
3-25689550511 |
NXT-22532 |
Updating dynamic records on multiple record definitions with same key field name does not work |
|
Description: |
Update of dynamic records do not work with multiple record definitions having same key name because existing records are filtered only on key and value but not field usage name. |
|||
Resolution: |
Updating dynamic records on multiple record definitions with same key field name work as expected with this change. Now the existing records are filtered on field usage name also. |
|||
32874330 |
3-25212425011 |
NXT-22582 |
BP |
Tune the Limit Consumption query for faster response. |
Description: |
After upgrading to 3.20.2, increase in the average processing timings when compared to the previous base line tests was reported. Limit consumption query needs optimization to fix this. |
|||
Resolution: |
The query has been tuned to have a better execution plan and will reduce the overall execution time of the query. |
|||
32887575 |
NXT-22596 |
BP |
Error in finalization step if there there are no existing counter periods for provider limit counter |
|
Description: |
There is error in finalization step if there are no existing counter periods for provider limit counter. Code returns null in such cases leading to null pointer. |
|||
Resolution: |
If there are no existing counter periods for provider limit counter, finalization will continue as expected. Empty list is returned instead of null in such cases. |
|||
32898240 |
3-25943541561 |
NXT-22620 |
BP |
Enrollment client does not initialize property in all culster nodes if properties come from the database |
Description: |
Enrollment client properties are specified in the database (not in the properties file). In one of the cluster nodes the Enrollment Client is initialized properly but in the other node Enrollment Client initialization seems to happen before initialization of the properties collection was completed. |
|||
Resolution: |
While multi node cluster started one of the node is not ready with initialized state to properly configure enrollment client information. With this fix each node will ensure to populate the enrollment client with appropriate values. |
Issues that were backported in previous Release / Patch
BugDB | Internal | Summary | Backport | BugDB | SR |
---|---|---|---|---|---|
32029725 |
NXT-21318 |
LOV not displayed for certain flexcodes for Dynamic records. |
3.20.3.0.5 |
32029774 |
3-24571978961 |
32139431 |
NXT-21456 |
CMT data set containing flex codes systems and flex codes take more time than 3.20.2.0.0 |
3.20.3.0.6 |
32594054 |
3-24383895551 |
32501857 |
NXT-22044 |
Claims Reprocess Integration Point should mark the existing pend reasons as resolved |
3.20.2.0.9 |
32519594 |
3-25047894481 |
32501857 |
NXT-22044 |
Claims Reprocess Integration Point should mark the existing pend reasons as resolved |
3.20.3.0.6 |
32529926 |
3-25047894481 |
32501857 |
NXT-22044 |
Claims Reprocess Integration Point should mark the existing pend reasons as resolved |
3.21.1.0.1 |
32529906 |
3-25047894481 |
32554859 |
NXT-22158 |
Duplicating a claim line which has a value for an Overriding Claim Line parameter gives error |
3.21.1.0.1 |
32554892 |
3-25162308611 |
32554859 |
NXT-22158 |
Duplicating a claim line which has a value for an Overriding Claim Line parameter gives error |
3.20.3.0.6 |
32554920 |
3-25162308611 |
32554859 |
NXT-22158 |
Duplicating a claim line which has a value for an Overriding Claim Line parameter gives error |
3.20.2.0.9 |
32554930 |
3-25162308611 |
32592844 |
NXT-22212 |
CLA-FL-BENS-066 error is attached to claimline even when policy product exists |
3.21.1.0.2 |
32609242 |
3-25255922421 |
32592844 |
NXT-22212 |
CLA-FL-BENS-066 error is attached to claimline even when policy product exists |
3.20.2.0.9 |
32592982 |
3-25255922421 |
32594377 |
NXT-22217 |
The urls to collect data from source system for CMT import, should be based on the request url |
3.21.1.0.2 |
32594368 |
3-25194634741 |
32626154 |
NXT-22261 |
Currency conversion (payment) signature executed once per claim |
3.21.1.0.1 |
32626173 |
3-25359046661 |
32626154 |
NXT-22261 |
Currency conversion (payment) signature executed once per claim |
3.20.2.0.9 |
32633574 |
3-25359046661 |
32635008 |
NXT-22273 |
Claims application not Showing the Reference Sheets option on menu option |
3.21.1.0.2 |
32816965 |
3-25352091891 |
32656493 |
NXT-22301 |
Benefits task should not fail with NPE if incorrect subscription date is returned by the enrollment response |
3.21.1.0.2 |
32656520 |
3-25194388651 |
32656493 |
NXT-22301 |
Benefits task should not fail with NPE if incorrect subscription date is returned by the enrollment response |
3.20.2.0.9 |
32656541 |
3-25194388651 |
32663728 |
NXT-22322 |
NPE in benefits step is seen where claim has claimline(s) having case definition details as ancillary lines. |
3.20.2.0.9 |
32663806 |
3-25194388651 |
32663728 |
NXT-22322 |
NPE in benefits step is seen where claim has claimline(s) having case definition details as ancillary lines. |
3.21.1.0.2 |
32663803 |
3-25194388651 |
32663776 |
NXT-22328 |
Claim processing fails with NPE in finalize task when consumptions are finalized before periods |
3.20.2.0.9 |
32663843 |
3-25194388651 |
32663776 |
NXT-22328 |
Claim processing fails with NPE in finalize task when consumptions are finalized before periods |
3.21.1.0.2 |
32663846 |
3-25194388651 |
32869636 |
NXT-22340 |
Conditional display triggered on flexcodes based fields is not working |
3.21.1.0.3 |
32873325 |
3-25808562021 |
32682923 |
NXT-22343 |
Claims search in GUI taking long time. |
3.20.2.0.9 |
32718141 |
3-25228475161 |
32682923 |
NXT-22343 |
Claims search in GUI taking long time. |
3.21.1.0.2 |
32718142 |
3-25228475161 |
32735599 |
NXT-22406 |
Supported paths in claimscalloutresponse IP metadata doesn’t work. |
3.20.2.0.10 |
32756400 |
3-25577949681 |
32735599 |
NXT-22406 |
Supported paths in claimscalloutresponse IP metadata doesn’t work. |
3.21.1.0.2 |
32756401 |
3-25577949681 |
32766599 |
NXT-22426 |
CLA-IP-ENRO-009 error is thrown when the families in the enrollment response have a time gap between them |
3.21.1.0.2 |
32766628 |
3-25664580391 |
32768782 |
NXT-22427 |
Scrollbar resets when changing the method/rule in DPPC page. |
3.20.2.0.10 |
32768858 |
3-25455694151 |
32768782 |
NXT-22427 |
Scrollbar resets when changing the method/rule in DPPC page. |
3.21.1.0.2 |
32768828 |
3-25455694151 |
32804829 |
NXT-22492 |
Duplicating a claim line which has a value for an Overriding Claim Line Parameter gives error. |
3.21.1.0.2 |
32804939 |
3-25726570421 |
32804829 |
NXT-22492 |
Duplicating a claim line which has a value for an Overriding Claim Line Parameter gives error. |
3.20.2.0.10 |
32804930 |
3-25726570421 |
32805296 |
NXT-22495 |
SEND_FINANCIAL_MESSAGES activity type should be allowed to be recovered |
3.20.2.0.11 |
32893871 |
3-25694698761 |
32805296 |
NXT-22495 |
SEND_FINANCIAL_MESSAGES activity type should be allowed to be recovered |
3.21.1.0.3 |
32893870 |
3-25694698761 |
32842738 |
NXT-22532 |
Updating dynamic records on multiple record definitions with same key field name does not work |
3.21.1.0.2 |
32847608 |
3-25689550511 |
Known Issues
BugDB | SR | Internal | Summary |
---|---|---|---|
31545595 |
NXT-13750 |
GEN-DYNA-001 not raised when sending in multiple lines with the same value |
|
Description: |
GEN-DYNA-001 not raised when sending in multiple lines with the same value for a dynamic field that is setup to be unique. |
||
21085259 |
3-10126085901 |
NXT-13816 |
Some classifications are being appended twice when duplicating rows of PPCS |
Description: |
Some classification fields are being appended twice when duplicating Partial Provider Pricing Clauses in a Pricing Option. These duplicate values are separated by a semi-colon.
This is the case for the following fields: |
||
25244244 |
NXT-15022 |
Access- RM0016 - On the persons and Organizations page The expand overflow button is not accessible by keyboard |
|
Description: |
While doing keyboard testing the objective is that via keyboard a person can access the whole application. But on Persons and Organizations page the cursor focus does not move to the expand overflow icon. |
||
25244411 |
NXT-15247 |
Access - CMN - Value and Type Focus is lost after Value field |
|
Description: |
In Value and Type field Focus is lost after Value field and user could not access type field automatically. |
||
25244539 |
NXT-15572 |
Access - Oghag tool - links - Empty values for Servicing provider some how gets detected as links and hence error displayed |
|
Description: |
On View Authorization page for blank value on Servicing provider link is getting detected which throws the error when the link tool on the OGHAG toolbar is used. |
||
25222260 |
NXT-15588 |
Access - Documentation - Lang attribute missing for HTML element |
|
Description: |
When used structure tool of OGHAG toolbar 1 error is constantly appearing for all the pages of documents. i.e. Error - No lang attribute found on HTML element in document. The same issue is observed for Integration guide. |
||
25228067 |
NXT-15592 |
Access - Focus should first come left hand side first menu |
|
Description: |
Keyboard Testing |
||
25228223 |
NXT-15593 |
Access - CTRL+INS+I: List items does not work in the application |
|
Description: |
Pre-requisites |
||
25228451 |
NXT-15594 |
Access - Error messages are not read in SR mode |
|
Description: |
Pre requisites - Screen reader mode ON, Jaws, use <TAB> to navigate
Steps to reproduce: |
||
25238148 |
NXT-15600 |
Accessibility - When 200% ZOOM is applied on NO vertical scroll is available |
|
Description: |
Steps to reproduce : 1> Navigate to Draft Provider Pricing Clauses(DPPC) page. 2> Set the browser zoom of FF to 200%. 3> Verify the page. Observations : No vertical scroll is found. When the main section is displayed the child section is not displayed. When main panel is closed the child section is some what displayed but again as vertical scroll is not there so not possible to find the records. |
||
25238284 |
NXT-15602 |
Access - Close Tab 'X' icon is not accessible while doing keyboard testing |
|
Description: |
Keyboard Testing |
||
25238564 |
NXT-15603 |
Access - "ITEM:" is missing for all the non-context tables in the parent |
|
Description: |
Steps to reproduce: |
||
25239039 |
NXT-15605 |
Access - Jump to line functionality of JAWS does not work on our application |
|
Description: |
Jump to line functionality of JAWS enables user to navigate to specific line/attribute based on it unique number. |
||
25239527 |
NXT-15609 |
Access - Document Testing - Graphic images are not detected by Jaws |
|
Description: |
Open JAWS, Screen Reader on. |
||
25239595 |
NXT-15611 |
Access - Document Testing - The page address link is read as page title |
|
Description: |
JAWS reads page address link as Page Title. Steps to recreate are - Open JAWS; Navigate to document ; Press INS + T and Verify JAWS audio |
||
27174341 |
NXT-17645 |
Accessibility - Documentation - No summary defined for data table |
|
Description: |
Steps to reproduce Observation - No Summary Defined for Data table (wcag2 1.3.1) (Table tool) |
||
28334716 |
NXT-18265 |
Accessibility - Investigate how to implement and apply High contrast mode |
|
Description: |
This task is to enable high contrast mode for JET UI’s . |
||
28357739 |
NXT-18626 |
Accessibility - No documentation to define accessibility and compatibility features |
|
Description: |
As, JET provides info that should be included in the accessibility chapter of any product built with it, there should be documentation to define Accessibility and Compatibility Features. |
||
31528485 |
NXT-20720 |
Accessibility - Application is not supporting PORTRAIT mode |
|
Description: |
The application needs to support portrait mode as well as landscape mode. |
||
31528563 |
NXT-20721 |
Accessibility - Not able to acces menu items with 300% zoom |
|
Description: |
With 300% zoom user is not able to access the menu items which is a loss of information/ functionality. Also the dropdown with user name is not visible with 400% zoom. |
||
31528989 |
NXT-20722 |
Accessibility - Not able to access gear icon with LOV using keyboard on create group client page |
|
Description: |
The issue can be reproduced by accessing any LOV through keyboard. |
||
31528927 |
NXT-20723 |
Accessibility - Additional information which comes from hovering over links is not accessible. |
|
Description: |
Additional information which comes from hovering over links is not accessible. |
||
31529019 |
NXT-20724 |
Accessibility - Advanced Search Box is not accessible in Firefox browser. |
|
Description: |
Advanced Search Box is not accessible in Firefox browser. It works fine in Chrome Browser. This issue is applicable for JET screens. |
||
31529141 |
NXT-20725 |
Accessibility - Save status messages are not conveyed through screen reader |
|
Description: |
Assistive technology does not covey the information of the status messages. |
||
31628710 |
NXT-20881 |
UI - the horizontal scroll bar retraces once on claim line section |
|
Description: |
On claim line section, the horizontal scroll bar retraces back once user tries to check details on right of the claim lines. Although it happens only once and in later instances it works as expected. |
||
31634226 |
NXT-20888 |
UI - User is unable to navigate on detail dialogs while moving to next set of records. |
|
Description: |
Preconditions: Set the ohi.ui.maxrowstoretrieve property to a minimum value (eg. 5) |
||
31636129 |
NXT-20889 |
UI - Horizontal scroll bar on claim line area repositions at center after opening two claimline simultaneously. |
|
Description: |
Preconditions: A Claim with multiple claim lines & user tries to open multiple claim line overflow area. |
||
32018463 |
NXT-21301 |
CALLOUTSEND process gives exception intermittently |
|
Description: |
Callout send process is failing intermittently |
||
32192848 |
NXT-21548 |
Textarea as the column in the search table is not rendering correctly |
|
Description: |
Steps to Reproduce: |
||
32477023 |
NXT-22007 |
With clicking Next button dialog button not refreshed |
|
Description: |
In Popup dialogs, Next and previous button doesn’t work due to refresh issue. |
||
32477460 |
NXT-22010 |
No base view generated for reference sheet lines |
|
Description: |
Reference sheet(line)s use a different storage structure (JSON) for the dynamic fields. The base view generator does not support that yet. So the reference sheet line columns can’t be queried using base views. |
||
32530815 |
NXT-22103 |
ACTIVITY CONSUMPTION_IMPORT should not be triggered from IP |
|
Description: |
Invoking the activity consumption import process through activity through IP is not allowed from UI and it should not be allowed from IP as well. |
||
32550583 |
NXT-22152 |
Baseview generation sometimes might result in error: ORA-01461 |
|
Description: |
Occasionally baseview generation results in error: ORA-01461. In the event that this happens, typically resubmitting the generation process resolves the problem. |
||
32577959 |
3-24972262511 |
NXT-22185 |
Claim line dynamic field not updated in correct step of claims flow |
Description: |
When claim Line dynamic field is updated via derivation rule in pre-pricing step, it gets updated after pre-benefits step only. |
||
32756386 |
3-25620284361 |
NXT-22415 |
Data replication stops working after daylight saving time ends |
Description: |
After DST Daylight Saving Time ends, no new task (DataReplicationTargetSynchronization) is spawned. So, data replication stops working. This happens, for example, when the replication interval is configured as 1 minute (i.e., when the value of the property ohi.datareplication.event.retrieval.interval is set to 60). |
||
32836861 |
NXT-22523 |
Scrollbar resets when changing the fields in fee schedule and reference sheet pages |
|
Description: |
Scrollbar resets when changing the fields in fee schedule and reference sheet pages |
||
32867500 |
3-25801151221 |
NXT-22574 |
Duplicate cases get created when there is product history and past case date |
Description: |
Claims are pending with msg - Duplicate adjudication cases found for insurable entity. This happens when there is product history and past case date. |
||
32894544 |
NXT-22614 |
The property change ohi.service.PolicyEnrollmentClient.client.authentication is not effective immediately |
|
Description: |
The property change ohi.service.PolicyEnrollmentClient.client.authentication is not effective immediately and requires a server restart. For example, changing the value from BasicAuthentication to None works only after the WebLogic server is restarted. |
||
32945290 |
NXT-22633 |
Same error shown multiple times on click of save in table template pages |
|
Description: |
When there is an error shown to user while saving a reference sheet line and user clicks on save again the error message is shown twice. |
||
32945205 |
NXT-22635 |
Referencesheetlines page shown blank when Referencesheet has flexcodesystems |
|
Description: |
For some of reference sheets(refsheets with flexcodesystem), while creating reference sheet line, the page is shown blank. And there are console errors shown. |
||
32920927 |
3-25706903951 |
NXT-22644 |
Activities of type process_target_repl_events can not be restarted from the view activities screen |
Description: |
Activities of type process_target_repl_events are started with origin Spawned i.e. as if these originate from a parent Activity. Also, the screen does not allow restarting of the Spawned Activities; in that case the parent Activity would be restarted. |
||
32922966 |
3-25735187811 |
NXT-22647 |
Fee schedule currency is updated with default currency even if the same currency already exists on it |
Description: |
Fee schedule currency is updated with default currency every time currency is not passed in the request even if the same (default )currency already exists on it . This leads to GEN-RULE-020 error when there are concurrent requests on the same fee schedule. |
||
32933730 |
NXT-22675 |
In Baskets page, currency field in basket details tab should be non editable and be inherited from the currency of baskets |
|
Description: |
In Baskets page, currency field in basket details tab should be non editable and be inherited from the currency of baskets |
||
32937513 |
3-25927473871 |
NXT-22677 |
Amounts in Manual Benefits are stored incorrectly |
Description: |
When having a Claim in status Manual Benefits and attempting to modify the amounts, OHI doesn’t store the amounts correctly, allowing a total amount higher than the benefits input amount and violating a business rule. |
||
32945319 |
NXT-22689 |
LOV - deselect functionality is not working in first attempt |
|
Description: |
|
||
32945179 |
NXT-22692 |
Currency field disappears once the user navigates to another textbox |
|
Description: |
Go to baskets page. Add the baskets details. On adding the currency from the drop down in the basket details tab, the currency value disappears as soon as the user navigates to authorized amount text box. |
||
32945627 |
NXT-22704 |
The SetRecalculateBenefits function fails intermittently |
|
Description: |
While trying to set the amount on claimLineRuleCoverage using setAmountManually method ,the amount is set to the desired amount on claimLineRuleCoverage. But after recalculation of benefits the amount(cover label) on claimLineCoverages is not set to the desired amount.This issue is occurring intermittently. |
||
32987105 |
NXT-22789 |
Blank search on search list is not rendering the results in UI. |
|
Description: |
When user perform blank search on pages where search list template is used, search results are not getting rendered in UI. |
||
32989308 |
NXT-22792 |
Sometimes JET UI pages with large number of fields might cause a bad request error. |
|
Description: |
Sometimes JET UI pages with large number of fields might cause a bad request error due to a large request header like - "Request Header Or Cookie Too Large" thereby not rendering the page. In such a case the floorplan might need to be modified to reduce the number of fields and thereby reducing the accept header size. There is an enhancement planned in 3.21.3.0.0 to reduce the accept header size. |