Index

Symbols

/etc/hosts.allow setting 3.2.1.1, 3.2.2, 3.2.3.1, 3.2.3.2
/etc/inet/hosts file
- configuring 2.3.2
- planning 1.4.6
/etc/inet/ntp.conf.include file
- creating 3.2.14.2, 3.2.14.3
/etc/inet/ntp.conf.sc file
- configuring 3.2.14.2, 3.2.14.3
/etc/inet/ntp.conf file
- configuring 3.2.14
/etc/lvm/md.tab file 4.2.4
/etc/vfstab file
- adding mount points 5.1.1
- verifying the configuration 5.1.1
/global directory 1.5.6
/opt/SUNWcluster/bin/pconsole utility
- installing the software 2.3.3
/usr/cluster/bin/claccess command
- adding nodes to the authorized-node list 7.1.1
- removing nodes from the authorized-node list 3.2.7.1
/usr/cluster/bin/cldevice command
- updating the global-devices namespace 4.2.1
- verifying command processing 4.2.1
/usr/cluster/bin/clnode command
- viewing private host names 3.2.13
/usr/cluster/bin/clquorumserver command
- starting the quorum server 2.3.4
/usr/cluster/bin/clresource command
- disabling resources 7.1.3
- listing resources 7.1.3
- taking resource groups offline
  - CR 6349292 7.1.3
/usr/cluster/bin/clresourcegroup command
- deleting resource groups 7.1.3
- unmanaging resource groups 7.1.3
/usr/cluster/bin/clsetup utility
- adding
  - cluster interconnects 3.2.5
  - file systems to a zone cluster 6.2.3.5
  - global storage devices to a zone cluster 6.2.5.1
  - highly available local file systems to a zone cluster 6.2.3.1
  - ZFS storage pools to a zone cluster 6.2.3.3
- changing private host names 3.2.13
- creating a zone cluster 6.2.1.2
- navigation tip 6.2.1.2
- post installation setup 3.2.11
/usr/cluster/bin/cluster check command
- validating the cluster 3.2.17
/usr/cluster/bin/cluster command
- adding
  - nodes 3.2.8
  - zone clusters to the private IP-address range 1.4.13.3, 3.2.6
- creating new global clusters 3.2.2
/usr/cluster/bin/clzonecluster command
- booting the zone cluster 6.2.1.2
- halting the zone cluster 7.1.3
- installing the zone cluster 6.2.1.2
/usr/cluster/bin/scinstall command
- adding nodes 3.2.7
- creating the global cluster 3.2.1
- creating the global cluster by using Automated Installer 3.2.3
- unconfiguring Oracle Solaris Cluster software 7.1.1

A

adapters
- local MAC address 1.4.8
- Oracle VM Server for SPARC guest domains 1.4.13.5.1
- tagged VLAN
  - cluster interconnect guidelines 1.4.13.5.1
  - public-network guidelines 1.4.8
- VLAN
  - private-network guidelines 1.4.13.3
adding 2.3
- cluster-file-system mount points to new nodes 2.3.2
- drives to a disk set 4.2.2
- file systems to a zone cluster 6.2.3
- local file systems to a zone cluster 6.2.4
- mediator hosts 4.3.2
- storage devices to zone clusters 6.2.5
address property 6.2.1.2
admin_low template
- Trusted Extensions 6.2.1.1
administrative console
- installing pconsole software 2.3.3
- IP addresses 1.4.6
affinities
- scalable device-group resource groups 5.2.4
AI 3.2.3
allowed-address property 6.2.1.2
applications
- installing on a cluster file system 1.5.3
archiveadm
- create an archive 3.2.3.2, 3.2.3.3
authentication
- authorized-node list 3.2.7.1
authorized-node list
- adding nodes 7.1.1
- removing nodes 3.2.7.1
Automated Installer
- installing Oracle Solaris and Oracle Solaris Cluster software 3.2.3
- manifest 3.2.3.1, 3.2.3.2, 3.2.3.3
- troubleshooting installation 3.2.3.1
automatic power-saving shutdown
- restriction 1.2.2
automatic reboot on disk-path failures
- disk-path failures 3.2.1.1

B

booting
- into noncluster mode 7.1.1
brand property 6.2.1.2
brand zones
- zone clusters 1.4.15.2
BUI
- tasks you can perform
  - add a file system to a zone cluster 6.2.3
  - add storage a zone cluster 6.2.5
  - create a zone cluster 6.2.1.2
  - view capped memory for a zone cluster 6.2.1.2

C

capped-cpu scope type
- zone clusters 6.2.1.2
centralized installer 2.3.7
changing
- private hostnames 3.2.13
- private IP-address range 3.2.6
cipso template
- zone cluster IP addresses 6.2.1.4
claccess command
- adding nodes to the authorized-node list 7.1.1
- removing nodes from the authorized-node list 3.2.7.1
cldevice command
- updating the global-devices namespace 4.2.1
- verifying command processing 4.2.1
clinstall program
- installing software packages 2.3.7
clnode command
- viewing private host names 3.2.13
clquorumserver command
- starting the quorum server 2.3.4
clresource
- group command 5.2.2
clresource command
- disabling resources 7.1.3
- listing resources 7.1.3
- taking resource groups offline 7.1.3
clresourcegroup command
- bringing online resource groups 5.2.2
- creating
  - Oracle ACFS resource group 5.2.6
  - scalable resource group 5.2.4
  - SUNW.wait_zc_boot resource group 5.2.5
- deleting resource groups 7.1.3
- unmanaging resource groups 7.1.3
clsetup utility
- adding
  - cluster interconnects 3.2.5
  - file systems to a zone cluster 6.2.3.5
  - global storage devices to a zone cluster 6.2.5.1
  - highly available local file systems to a zone cluster 6.2.3.1
  - ZFS storage pools to a zone cluster 6.2.3.3
- changing private hostnames 3.2.13
- creating a zone cluster 6.2.1.2
- navigation tip 6.2.1.2
- post installation setup 3.2.11
cluster check command
- validating the cluster 3.2.17
- vfstab file check 5.1.1
cluster command
- adding
  - nodes 3.2.8
  - zone clusters to the private IP-address range 1.4.13.3, 3.2.6
- creating new global clusters 3.2.2
cluster file systems
- adding to a new node 2.3.2
- adding to a zone cluster 6.2.3.7
- adding to a zone cluster with clsetup 6.2.3.5
- installing applications 1.5.3
- LOFS restriction 1.5.3
- mount options 5.1.1
- planning 1.5, 1.5.6
- restrictions
  - communication end points 1.5.3
  - fattach command 1.5.3
  - forcedirectio 1.5.6
  - LOFS 1.2.2
  - quotas 1.5.3
  - zone clusters 1.5.3
  - zone file system 1.5.3
- verifying the configuration 5.1.1
cluster file systems, UFS
- configuring 5.1.1
cluster file systems, ZFS
- configuring 5.1.2.1
cluster interconnects
- changing the private IP-address range 3.2.6
- configuring on a single-host cluster 3.2.5
- planning 1.4.13.5
cluster name 1.4.13.1
cluster nodes 1.4.13.2
clzonecluster command
- booting the zone cluster 6.2.1.2
- halting the zone cluster 7.1.3
- installing the zone cluster 6.2.1.2
communication end points
- restriction on cluster file systems 1.5.3
Compatibility Guide 2.3.1
config/enable_tcpwrappersdisabling 3.2.1.1, 3.2.2, 3.2.7.1, 3.2.8
config/enable_tcpwrappersenabling 3.2.7.1, 3.2.8
configuration guide 2.3.1
configure-allowed-address property 6.2.1.2
configuring
- additional global-cluster nodes
  - by using an XML file 3.2.8
  - by using scinstall 3.2.7
- cluster interconnects on a single-host cluster 3.2.5
- disk sets 4.2.1
- IPMP groups 2.3.2
- md.tab file 4.2.4
- Network Time Protocol (NTP) 3.2.14
- new global clusters
  - by using an XML file 3.2.2
  - by using Automated Installer 3.2.3
  - by using scinstall 3.2.1
- Oracle ACFS file systems 5.2
- Packet Filter feature of Oracle Solaris 2.3.11
- quorum devices 3.2.11
- quorum server software 2.3.4
- Solaris Volume Manager 4.1
- state database replicas 4.1.2
- troubleshooting 3.2.1.1, 3.2.2, 3.2.7.1, 3.2.8
- Trusted Extensions for use with zone clusters 6.2.1.1, 6.2.1.4
- Trusted Extensions software 6.2.1.1
- UFS cluster file systems 5.1.1
- user work environment 2.3.10
- ZFS cluster file systems 5.1.2.1
- zone clusters 6.2
console-access devices
- IP addresses 1.4.6
- planning 1.4.7
cpu-shares property 6.2.1.2
create
- archive 3.2.3.2
creating
- multiple-owner volume-manager framework resource group 5.2.2
- Oracle RAC framework resource group 5.2.2
- solaris10 brand zone clusters 6.2.1.3
- zone clusters 6.2.1.2

D

data services
- support in solaris10 brand zone clusters 6.2.1.2
data-services installation
- by using the clinstall command 2.3.7
- by using the pkg command 2.3.8
dedicated-cpu scope type
- zone clusters 6.2.1.2
default router 6.2.1.2
defrouter property 6.2.1.2
dependencies
- ScalDeviceGroup resource type 5.2.4
- SUNW.ScalDeviceGroup resource type 5.2.4
- SUNW.vucmm_svm resource type 5.2.2
- vucmm_svm resource type 5.2.2
device groups
- planning 1.5.2
- replicated disks 1.5.2
- resource group affinities 5.2.4
- setting the replication property 4.2.1
DID devices
- adding to a zone cluster 6.2.5.2
disabling
- installation mode 3.2.11
- resources 7.1.3
disk drives 4
disk-path monitoring
- default 3.2.1.1
disks 4.2.2
disksets 4
disk sets
- adding drives 4.2.2
- adding to a zone cluster 6.2.5.3
- configuring 4.2.1
- repartitioning drives 4.2.3
- reserved names 1.6.2
disk strings
- dual-string mediator requirements 4.3.1
domain console network interfaces
- IP addresses 1.4.6
drives
- adding to disk sets 4.2.2
- mirroring differing device sizes 1.6.4.1
- repartitioning 4.2.3
dual-string mediators
- adding hosts 4.3.2
- overview 4.3
- planning 1.6.2
- repairing data 4.3.3
- status 4.3.3

E

enable_priv_net property 6.2.1.2
enabling
- automatic reboot on disk-path failures 3.2.1.1
- LOFS requirements 1.2.2
- NTP 3.2.14.1
- Oracle Solaris I/O multipathing 2.3.2
- remote login 6.2.1.1
enabling automatic reboot 3.2.1.1
examples
- activating volumes in the md.tab file 4.2.5
- adding
  - drives to a disk set 4.2.2.1
  - local file systems to a zone-cluster node 6.2.4.1
  - local ZFS pools to a zone-cluster node 6.2.4.2
  - mediator hosts 4.3.2
  - raw-disk devices to a zone-cluster node 6.2.5.4
- adding devices to a zone cluster
  - DID devices 6.2.5.2
  - disk sets 6.2.5.3
- adding file systems to a zone cluster
  - cluster file systems 6.2.3.7
  - highly available local file systems 6.2.3.2
  - Oracle HSM shared file systems 6.2.3.8
  - ZFS cluster file systems 6.2.3.6
  - ZFS storage pools 6.2.3.4
- configuring Oracle Solaris Cluster software
  - on additional nodes by using scinstall 3.2.7.1
  - on all nodes by using an XML file 3.2.2
  - on all nodes by using scinstall 3.2.1.1
- creating a cluster file system 5.1.1
- creating a disk set 4.2.1
- creating state database replicas 4.1.2
- md.tab file 4.2.4
- uninstalling
  - individual Solaris Cluster packages 7.1.6
- updating SCSI quorum devices after adding a node 3.2.10
exclusive IP type
- restriction for zone clusters 1.4.15.2
explorer command 3.2.18

F

failover file systems 1.5.3
Fair Share Scheduler shares 6.2.1.2
fattach command restriction 1.5.3
fencing protocols 1.4.13.6
- NAS devices 1.4.10
- SCSI quorum devices 1.4.13.7
- software quorum 1.4.13.7
file system logging
- planning 1.6.3
file systems
- adding to a zone cluster 6.2.3
  - highly available local file systems 6.2.3.1
  - ZFS storage pools 6.2.3.3
forcedirectio command
- restriction 1.5.6

G

Global_zone resource-typeproperty 1.4.15.2
global-cluster nodes
- adding nodes
  - by using an XML file 3.2.8
  - by using scinstall 3.2.7
  - updating quorum devices after 3.2.10
- creating the global cluster
  - by using an XML file 3.2.2
  - by using Automated Installer 3.2.3
  - by using scinstall 3.2.1
- IP addresses 1.4.6
- naming 1.4.13.2
- node ID number assignment 1.4.13.2
- Oracle VM Server for SPARC domains 2.3.1
- planning 1.4.13.2
- planning for zone clusters 1.4.15.1
- verifying
  - status 3.2.1.1, 3.2.2, 3.2.3.1, 3.2.3.2, 3.2.3.3, 3.2.7.1
global devices
- file system limitation to UFS 1.2.3
- namespace
  - updating 4.2.1
- planning 1.5
- restrictions on lofi device 1.2.3
- space requirement for lofi device 1.2.3
global fencing 1.4.13.6
global file systems 5.1.1
global storage devices
- adding to a zone cluster 6.2.5.1

H

HA for NFS
- coexistence with highly available local file systems 3.2.1.1, 3.2.2, 3.2.3.1, 3.2.7.1
- restriction with LOFS 1.2.2, 1.5.3
hardware RAID
- internal disk mirroring 2.3.5
HAStoragePlus 1.4.15.2
- mounting file systems in zone clusters 1.4.15.2
highly available local file systems 1.4.15.2
- adding to a zone cluster 6.2.3.1
- alternative to cluster file systems 1.5.3
- coexistence with HA for NFS 3.2.1.1, 3.2.2, 3.2.3.1, 3.2.7.1
- LOFS restriction with HA for NFS 1.2.2
- quotas support 1.5.3
highly available ZFS storage pools
- adding to a zone cluster 6.2.3.3
high-priority processes
- restriction 1.4.11
hostname property 6.2.1.2
hosts file
- configuring 2.3.2
- planning 1.4.6
hot-spare disks
- planning 1.6.1

I

importing
- zones into zone clusters 6.2.2
initialization files 2.3.10
installation mode
- disabling 3.2.11
installing 2.3
- data services
  - by using the clinstall command 2.3.7
  - by using the pkg command 2.3.8
- Oracle HSM software 2.3.9
- Oracle Solaris Cluster software 2.3.8
- Oracle Solaris Cluster software (clinstall) 2.3.7
- Oracle Solaris software
  - alone 2.3.2
  - with Oracle Solaris Cluster software 3.2.3
- Oracle VM Server for SPARC software 2.3.6
- pconsole software 2.3.3
- quorum server software 2.3.4
- Solaris Volume Manager software 4.1.1
- Trusted Extensions software 6.2.1.1
installing and configuring
- Oracle Solaris and Oracle Solaris Cluster
  - from unified archives 3.2.3.2
instantiating
- resource types 5.2.4
integrated mirroring 2.3.5
internal hardware disk mirroring 2.3.5
IP addresses
- adding to a naming service 2.3.2
- changing the private IP-address range 3.2.6
- guidelines for zone clusters 1.4.15.1
- planning the private network 1.4.13.3
- planning the public network 1.4.6
ipadm listing private IP addresses 3.2.1.1, 3.2.2, 3.2.3.1, 3.2.3.2, 3.2.7.1, 3.2.8
IP-forwarding
- restrictions for IP forwarding 1.4.11
IPMP
- configuring groups 2.3.2
- planning the public network 1.4.8
IP network multipathing (IPMP) 1.4.8
IP strict multihoming
- hostmodel property 6.2.1.4
- Trusted Extensions 6.2.1.4
- zone clusters 6.2.1.4
IP type
- zone clusters 1.4.15.2
ip-type property 6.2.1.2
IPv6 addresses
- private network restriction 1.4.13.3, 1.4.13.5.1
- public-network use 1.4.8

J

java
- minimum version 1.2.2

L

labeled brand zone clusters
- configuring with Trusted Extensions 6.2.1.4
- options 6.2.1.2
- planning 1.4.15
LDAP configuration for Trusted Extensions 6.2.1.1
licenses
- planning 1.4.3
lightweight processes
- zone clusters 6.2.1.2
link-based IPMP groups 1.4.8
live migration
- restriction for Oracle VM Server for SPARC software 1.4.14
local
- file systems
  - adding to a zone cluster 6.2.3.2
- MAC address 1.4.8
local file systems
- adding to a specific zone-cluster node 6.2.4.1
- adding to a zone cluster 6.2.4
local ZFS storage pools
- adding to a specific zone-cluster node 6.2.4.2
locked memory 6.2.1.2
locked property 6.2.1.2
lofi device
- space requirement 1.2.3
- use restrictions 1.2.3
LOFS
- restriction 1.2.2, 1.5.3
log files
- Oracle Solaris Cluster installation 3.2.1.1
logging for cluster file systems
- planning 1.6.3
logical addresses
- planning 1.4.8
logical network interfaces
- restriction 1.4.13.5.1
loopback file system (LOFS)
- restriction 1.2.2, 1.5.3
LWPs
- zone clusters 6.2.1.2

M

manifest
- Automated Installer 3.2.3.1, 3.2.3.2, 3.2.3.3
max-lwps property 6.2.1.2
max-msg-ids property 6.2.1.2
max-sem-ids
- property 6.2.1.2
max-shm-ids property 6.2.1.2
max-shm-memory property 6.2.1.2
md.tab file
- configuring 4.2.4
mediators 4.3
message queue IDs
- zone clusters 6.2.1.2
mirroring
- differing device sizes 1.6.4.1
- internal disks 2.3.5
- multihost disks 1.6.4.1
- planning 1.6.4
- root pool planning 1.6.4.2
mount options for cluster file systems
- Oracle HSM software 6.2.3.5
- requirements 5.1.1
- UFS 1.5.5, 6.2.3.1, 6.2.3.5
mount points
- adding to new nodes 2.3.2
- cluster file systems 1.5.6
- modifying the /etc/vfstab file 5.1.1
- nested 1.5.6
MPxIO
- Oracle Solaris I/O multipathing 2.3.2
multihost disks
- mirroring 1.6.4.1
- planning 1.6.1
multiple-owner volume-manager framework resource group
- configuring 5.2.2
multiported disks 1.6.1
multiuser services
- verifying 3.2.1.1, 3.2.2, 3.2.7.1

N

naming conventions
- cluster 1.4.13.1
- global-cluster nodes 1.4.13.2
- private hostnames 1.4.13.4
- raw-disk devices 5.1.1
- tagged VLAN adapters 1.4.13.5.1
- zone clusters 1.4.15.2
naming service
- adding IP-address mappings 2.3.2
NAS devices
- configuring as quorum devices 3.2.11
- fencing 1.4.10
- troubleshooting in a zone cluster installation 6.2.1.2
NAT and Packet Filter feature of Oracle Solaris software 1.2.2
ncpus property 6.2.1.2
netmasks
- changing the private netmask 3.2.6
- planning the private network 1.4.13.3
network-attached storage 3.2.11
Network File System (NFS)
- guidelines for cluster nodes 1.4.10
- HA for NFS restriction with LOFS 1.4.10
network interface card (NIC) support for local MAC addresses 1.4.8
Network Time Protocol (NTP)
- configuring 3.2.14
- enabling 3.2.14.1
- guidelines 1.4.12
- restarting 3.2.14.1
- starting 3.2.14.1
NFS 1.4.10
NIC support for local MAC addresses 1.4.8
NIS servers
- restriction for cluster nodes 1.4.11
node IDs 1.4.13.2
- number assignment 1.4.13.2
node lists
- device groups 1.6.1
nodes 1.4.13.2
noncluster mode
- booting into 7.1.1
NTP
- configuring 3.2.14
- enabling 3.2.14.1
- guidelines 1.4.12
- restarting 3.2.14.1
- starting 3.2.14.1
ntp.conf.include file
- creating 3.2.14.2, 3.2.14.3
ntp.conf.sc file
- configuring 3.2.14.2, 3.2.14.3
ntp.conf file
- configuring 3.2.14
num_xip_zoneclusters property 6.2.1.2

O

Oracle ACFS file systems
- adding to a zone cluster 6.2.3.9
- configuration diagrams 5.2.1
- creating 5.2, 5.2.3
- framework resource groups 5.2.2
Oracle Explorer software 3.2.18
Oracle HSM
- adding shared file systems to a zone cluster 6.2.3.8
Oracle HSM software
- installing the software 2.3.9
- limited use 1.5.3
- mount options 6.2.3.5
- restriction 1.5.6
Oracle RAC framework resource group
- configuring for Oracle ACFS 5.2.2
Oracle Solaris
- minimum package 1.2.2
Oracle Solaris Cluster Manager 6.2.1.2
- adding
  - zfs storage to a zone cluster 6.2.3.3
- tasks you can perform
  - adding cluster file system to a zone cluster 6.2.3.5
  - adding highly available local file systems to a zone cluster 6.2.3.1
  - adding shared storage to a zone cluster 6.2.5.1
Oracle Solaris Cluster software
- group packages 2.3.7, 2.3.8, 3.2.3
- publisher 2.3.2, 2.3.3, 2.3.4, 2.3.8, 4.1.1
- uninstalling software 7
Oracle Solaris I/O multipathing software
- enabling 2.3.2
Oracle Solaris software
- installing
  - alone 2.3.2
  - Trusted Extensions feature 6.2.1.1
  - with Oracle Solaris Cluster software 3.2.3
- planning 1.2
  - /varfile system 1.2.3
  - partitions 1.2.3
  - root (/) file system 1.2.3
  - volume managers 1.2.3
- publisher 2.3.2, 4.1.1
- restrictions
  - automatic power-saving shutdown 1.2.2
  - Packet Filter feature 1.2.2
- SMF 3.2.1.1, 3.2.2, 3.2.7.1
- Trusted Extensions feature 1.4.15.3
Oracle Solaris unified archive
- installing and configuring Oracle Solaris and Oracle Solaris Cluster software 3.2.3.2
Oracle Solaris Unified Archive
- installing Oracle Solaris and Oracle Solaris Cluster software 3.2.3
  - how to 3.2.3.1
- replicate,restore 3.2.3
Oracle Solaris zones
- fencing for NAS devices 1.4.10
- quorum servers 1.4.9
Oracle VM Server for SPARC software
- domains as cluster nodes 2.3.1
- guest domains
  - Parallel Console Access (pconsole) restriction 2.3.3
  - planning the address range 1.4.13.3
  - virtual adapter names 1.4.13.5.1
- guidelines 1.4.14
- installing 2.3.6
- live migration restriction 1.4.14
- mpgroup boot drive support 1.4.14

P

package installation
- Oracle Solaris Cluster software 2.3.8
- pconsole software 2.3.3
package installation (clinstall)
- Oracle Solaris Cluster software 2.3.7
Packet Filter
- configuring 2.3.11
- restriction on scalable data services 2.3.11
- restrictions 1.2.2
Parallel Console Access (pconsole) software
- installing 2.3.3
- Oracle VM Server for SPARC restriction 2.3.3
partitions
- /var file system 1.2.3
- repartitioning drives 4.2.3
- root (/) file system 1.2.3
- swap 1.2.3
- volume manager 1.2.3
patches 1.4.4
PATH
- cluster nodes
  - /usr/cluster/bin/ directory 2.3.10
pconsole utility
- installing the software 2.3.3
- using 2.3.7, 2.3.8, 3.2.3.1, 3.2.3.2, 3.2.3.3
physical memory
- zone clusters 6.2.1.2
physical property 6.2.1.2
pkg program
- installing software packages 2.3.8
PNM object
- automatic group creation during installation 1.4.8
private hostnames
- changing 3.2.13
- planning 1.4.13.4
- zone clusters 1.4.15.2
private host names
- verifying 3.2.13
private IP addresses
- listing with ipadm 3.2.1.1, 3.2.2, 3.2.3.1, 3.2.3.2, 3.2.7.1, 3.2.8
private network
- adding zone clusters to the IP-address range 1.4.13.3, 3.2.6
- changing the IP-address range 3.2.6
- IPv6 address restriction 1.4.13.5.1
- Oracle VM Server for SPARC guest domains 1.4.13.3
- planning 1.4.13.3
- use in zone clusters 1.4.15.1
probe-based IPMP groups 1.4.8
public network
- adding IP addresses to a naming service 2.3.2
- IPv6 support 1.4.8
- planning 1.4.8
publisher
- Oracle Solaris Cluster software 2.3.2, 2.3.3, 2.3.4, 2.3.8, 4.1.1
- Oracle Solaris software 2.3.2, 4.1.1

Q

QFS 2.3.9
quorum devices 1.4.13.7
- and mirroring 1.6.4.2
- initial configuration 3.2.11
- NAS devices 3.2.11
- planning 1.4.13.7
- quorum servers 3.2.11
- restriction for replicated devices 1.4.13.7
- SATA disks 1.4.13.7
- SCSI protocol setting 1.4.13.7
- software quorum protocol 1.4.13.7
- troubleshooting
  - clsetup failure 3.2.11
  - scinstall failure 3.2.11
  - vote count 3.2.11
- updating after adding a node 3.2.10
- verifying 3.2.12
- ZFS restriction 1.4.13.7
quorum servers 2.3.4
- configuring as quorum devices 3.2.11
- guidelines 1.4.9
- installation directory 2.3.4
- installing quorum server software 2.3.4
- non-global zones 1.4.9
- packages installed 2.3.4
- requirements as a quorum device 3.2.11
- starting 2.3.4
- troubleshooting 2.3.4
quotas
- restriction on cluster file systems 1.5.3

R

rac_framework resource type
- instantiating 5.2.2
- registering 5.2.2
RAID
- restriction 1.6.1
raidctl command 2.3.5
rarpd service
- restriction for cluster nodes 1.4.11
raw-disk devices
- adding to a zone cluster 6.2.5.4
- naming conventions 5.1.1
rebooting
- into noncluster mode 7.1.1
recovering
- unsuccessful cluster node creation 3.2.1.1, 3.2.2, 3.2.7.1, 3.2.8
registering
- resource types 5.2.4
- ScalDeviceGroup resource type 5.2.4
- SUNW.rac_framework resource type 5.2.2
- SUNW.ScalDeviceGroup resource type 5.2.4
- SUNW.vucmm_framework resource type 5.2.2
- SUNW.vucmm_svm resource type 5.2.2
remote login
- Trusted Extensions 6.2.1.1
removing 7
- Oracle Solaris Cluster software 7
- partially configured node 7.1.1
- zone clusters 7.1.3
repairing
- mediator data 4.3.3
replicated devices
- disk requirement 1.5.2
- restriction as quorum devices 1.4.13.7
- setting the replication property 4.2.1
replicating
- a zone cluster
  - from unified archives 3.2.3.3
- a zone cluster node
  - from unified archives 3.2.3.3
resource groups
- making unmanaged 7.1.3
- multiple-owner volume-manager framework 5.2.2
- scalable device group
  - affinities 5.2.4
resources
- disabling 7.1.3
- listing 7.1.3
resource types
- ScalDeviceGroup
  - dependencies 5.2.4
- SUNW.rac_framework 5.2.2
- SUNW.ScalDeviceGroup 5.2.4
  - dependencies 5.2.4
- SUNW.vucmm_framework 5.2.2
- SUNW.vucmm_svm 5.2.2
  - dependencies 5.2.2
restarting
- NTP 3.2.14.1
restrictions
- live migration 1.4.14
- lofi device 1.2.3
root environment
- configuring 2.3.10
root pool mirroring
- planning 1.6.4.2
routers
- restriction for cluster nodes 1.4.11
RPC service
- disabling TCP wrappers 3.2.1.1, 3.2.2, 3.2.7.1, 3.2.8
- enabling TCP wrappers 3.2.7.1, 3.2.8
- restoring external access 2.3.7, 2.3.8
- restricted program numbers 1.4.11

S

SATA disks
- configuring as quorum devices 1.4.13.7
scalable data services
- Packet Filter restriction 2.3.11
scalable device groups
- resource group affinities 5.2.4
ScalDevice
- Group resource type
  - registering 5.2.4
ScalDeviceGroup
- instantiating 5.2.4
- registering 5.2.4
ScalDeviceGroup resource type
- dependencies 5.2.4
- instantiating 5.2.4
scinstall command
- adding nodes 3.2.7
- creating the global cluster 3.2.1
- creating the global cluster by using Automated Installer 3.2.3
- unconfiguring Oracle Solaris Cluster software 7.1.1
scope property 6.2.1.2
SCSI devices
- correcting reservations after adding a third node 3.2.10
- fencing protocol setting in quorum devices 1.4.13.7
semaphore IDs
- zone clusters 6.2.1.2
shared devices
- installing quorum devices 3.2.11
shared IP type
- zone clusters 1.4.15.2
shared memory
- zone clusters 6.2.1.2
shared memory IDs
- zone clusters 6.2.1.2
single-host clusters
- configuring cluster interconnects 3.2.5
- naming 1.4.13.2
single-node clusters 1.4.13.2
SMF
- verifying online services 3.2.1.1, 3.2.2, 3.2.7.1
software quorum protocol 1.4.13.7
software RAID
- restriction 1.6.1
software updates
- planning 1.4.4
- zone clusters 6.2.1.4
solaris10 brand zone clusters
- creating 6.2.1.3
- options 6.2.1.2
- planning 1.4.15
- supported versions 6.2.1.2
solaris brand zone clusters
- options 6.2.1.2
- planning 1.4.15
Solaris Volume Manager
- configuring 4.1
- disk set reserved names 1.6.2
- disk sets
  - adding drives 4.2.2
  - adding to a zone cluster 6.2.5.3
  - configuring 4.2.1
  - repartitioning drives 4.2.3
- dual-string mediators
  - adding hosts 4.3.2
  - overview 4.3
  - repairing bad data 4.3.3
  - status 4.3.3
- installing the software 4.1.1
- md.tab file 4.2.4
- mediators 4.3.2
- planning 1.6.2
- raw-disk device names 5.1.1
- state database replicas 4.1.2
- unique naming 1.6.2
- volumes
  - activating 4.2.5
spanning tree algorithm
- disabling for quorum servers 1.4.9
starting
- clsetuputility 3.2.5
- NTP 3.2.14.1, 3.2.14.2
- pconsole utility 2.3.7, 2.3.8, 3.2.3.1, 3.2.3.2, 3.2.3.3
- quorum servers 2.3.4
- scinstall utility 3.2.1.1
state database replicas
- configuring 4.1.2
status
- dual-string mediators 4.3.3
- verifying 3.2.12
storage devices
- adding global storage devices to a zone cluster 6.2.5.1
- adding raw-disk devices to a zone cluster 6.2.5.4
- adding to zone clusters 6.2.5
Sun Explorer software 3.2.18
SUNW.rac_framework resource group
- configuring for Oracle ACFS 5.2.2
SUNW.rac_framework resource type
- instantiating 5.2.2
- registering 5.2.2
SUNW.ScalDeviceGroup resource type
- dependencies 5.2.4
- instantiating 5.2.4
- registering 5.2.4
SUNW.vucmm_framework resource type
- instantiating 5.2.2
- registering 5.2.2
SUNW.vucmm_svm resource type
- dependencies 5.2.2
- instantiating 5.2.2
- registering 5.2.2
supported configurations 2.3.1
swap
- memory for zone clusters 6.2.1.2
- planning 1.2.3
- swap property 6.2.1.2
switches
- planning 1.4.13.5.2
sysid configuration for zone clusters 6.2.1.2

T

tagged VLAN adapters
- cluster interconnect guidelines 1.4.13.5.1
- public-network guidelines 1.4.8
TCP wrappers for RPC
- disabling 3.2.1.1, 3.2.2, 3.2.7.1, 3.2.8
- enabling 3.2.7.1, 3.2.8
- modifying /etc/hosts.allow 3.2.1.1, 3.2.2, 3.2.3.1, 3.2.3.2
three-way mirroring 1.6.4.1
tncfg template 6.2.1.1
transport adapters 1.4.13.5.1
transport switches
- planning 1.4.13.5.2
troubleshooting
- Automated Installer installation 3.2.3.1
- configuring
  - additional nodes 3.2.7.1
  - new global clusters 3.2.1.1, 3.2.2, 3.2.7.1, 3.2.8
- explorer baseline record of the configuration 3.2.18
- NAS devices in a zone cluster 6.2.1.2
- quorum devices
  - clsetup failure 3.2.11
  - scinstall failure 3.2.11
  - vote count 3.2.11
- quorum server installation 2.3.4
- removing partially configured node 7.1.1
Trusted Extensions
- admin_low template 6.2.1.1
- cipso template
  - zone cluster 6.2.1.4
- configuring 6.2.1.1
- configuring a zone cluster 6.2.1.4
- guidelines 1.4.15.3
- installation 6.2.1.1
- installing 6.2.1.1
- labeled brand 1.4.15
- LDAP 6.2.1.1
- password files 6.2.1.2
- remote login 6.2.1.1
- tncfg template 6.2.1.1
- txzonemgr BUI 6.2.1.2
- zoneshare script 6.2.1.1
- zoneshare Trusted Extension script 6.2.1.1

U

UFS logging
- planning 1.6.3
unconfiguring 7.1.1
- Oracle Solaris Cluster software 7.1.1
- zone clusters 7.1.3
unified archives
- archiveadm 3.2.3.2
- replicating a zone cluster 3.2.3.3
uninstalling 7
- Oracle Solaris Cluster software 7, 7.1.2
unique naming
- Solaris Volume Manager 1.6.2
user-initialization files
- modifying 2.3.10

V

validating the cluster 3.2.17
verifying
- automatic reboot on disk-path failures 3.2.1.1
- cldevice command processing 4.2.1
- cluster configuration 3.2.17
- cluster node status 3.2.1.1, 3.2.2, 3.2.3.1, 3.2.3.2, 3.2.3.3, 3.2.7.1
- Oracle Solaris Cluster software installation 3.2.12
- private host names 3.2.13
- quorum configurations 3.2.12
- SMF 3.2.1.1, 3.2.2, 3.2.7.1
- vfstab configuration 5.1.1
vfstab file
- adding mount points 5.1.1
- verifying the configuration 5.1.1
Virtial disk multipathing 1.4.14
VLAN adapters
- cluster interconnect guidelines 1.4.13.5.1
- private-network guidelines 1.4.13.3
- public-network guidelines 1.4.8
volume managers 1.6
- partitions for 1.2.3
- planning
  - general 1.6
  - Solaris Volume Manager 1.6.2
volumes
- Solaris Volume Manager
  - activating 4.2.5
vucmm_framework resource type
- instantiating 5.2.2
- registering 5.2.2
vucmm_svm resource type
- dependencies 5.2.2
- instantiating 5.2.2
- registering 5.2.2

Z

ZFS root pools
- internal disk mirroring 2.3.5
- planning mirroring 1.6.4.2
ZFS storage pools
- adding a local pool to a zone-cluster node 6.2.4.2
- adding to a zone cluster 6.2.3.3, 6.2.3.4
- restrictions 1.4.13.7
zone clusters
- adding an Oracle ACFS file system 6.2.3.9
- adding devices
  - DID devices 6.2.5.2
  - disk sets 6.2.5.3
  - global storage devices 6.2.5.1
  - raw-disk devices 6.2.5.4
- adding file systems 6.2.3
  - cluster file systems 6.2.3.5, 6.2.3.7
  - highly available local file systems 6.2.3.1
  - highly available ZFS storage pools 6.2.3.3
  - local file systems 6.2.3.2
  - local file systems for a specific zone-cluster node 6.2.4.1
  - local ZFS storage pools 6.2.4.2
  - Oracle HSM 6.2.3.8
  - ZFS storage pools 6.2.3.3, 6.2.3.4
- adding local file systems 6.2.4
- adding storage devices 6.2.5
- adding to the private IP-address range 1.4.13.3
- address property 6.2.1.2
- allowed-address property 6.2.1.2
- brand property 6.2.1.2
- brands 1.4.15
- capped-cpu 6.2.1.2
- configure-allowed-address property 6.2.1.2
- configuring 6.2, 6.2.1
- configuring to use Trusted Extensions 6.2.1.4
- creating 6.2.1.2
- dedicated-cpu 6.2.1.2
- default IP type 1.4.15.2
- default router 6.2.1.2
- defrouter property 6.2.1.2
- enable_priv_net property 6.2.1.2
- Fair Share Scheduler shares 6.2.1.2
- halting 7.1.3
- hostmodel property 6.2.1.4
- hostname property 6.2.1.2
- importing zones 6.2.2
- IP addresses 1.4.6
- ip-type property 6.2.1.2
- labeled brand options 6.2.1.2
- lightweight processes 6.2.1.2
- locked memory 6.2.1.2
- locked property 6.2.1.2
- message queue IDs 6.2.1.2
- mounting file systems with HAStoragePlus 1.4.15.2
- naming 1.4.15.2
- ncpus property 6.2.1.2
- num_xip_zoneclusters property 6.2.1.2
- Oracle ACFS file systems 5.2.3
- physical memory 6.2.1.2
- physical property 6.2.1.2
- planning 1.4.15
- scope property 6.2.1.2
- semaphore IDs 6.2.1.2
- setting the Global_zone resource-type property 1.4.15.2
- shared memory 6.2.1.2
- shared memory IDs 6.2.1.2
- software updates 6.2.1.4
- solaris10 brand
  - supported versions 6.2.1.2
- solaris10 brand options 6.2.1.2
- solaris brand options 6.2.1.2
- swap memory 6.2.1.2
- swap property 6.2.1.2
- sysid configuration 6.2.1.2
- unconfiguring 7.1.3
- zonepath property 6.2.1.2
zonepath property 6.2.1.2
zones
- importing into zone clusters 6.2.2