Move the Library Rack
Power off the library and lock the robot before moving the rack to prevent equipment damage.
- Power the library off (see Power Off the Library).
- Secure the robot (see Lock the Robot).
- If the floor is uneven, remove all magazines from library as tape cartridges can shift and obstruct library robotics when the library is restarted.
- Unlock all magazines using the remote interface or local operator panel. Press the Select All option on the Unlock Magazines dialog.
- Remove all magazines.
- Set the rack PDU circuit breakers to OFF and disconnect the PDU power cord(s) from the main circuit.
- Label and disconnect any host connection or LAN cables.
- Raise any leveling pads until the casters are supporting the rack. Release any rack anti-tip device(s), and remove any wheel chocks.
- Move the library to its new location. Reset the leveling pads.
- Reinstall the magazines.
- Reconnect power, host-connections, and local area network (LAN) cables.
- Unlock the robot (see Unlock the Robot).
- Power the library on (see Power On the Library).