- monitors or restricts accesses to system files and directories
aset [-p] [-d aset_dir] [-l sec_level] [-n user@host] [-u userlist_file]
The Automated Security Enhancement Tool (ASET) is a set of administrative utilities that can improve system security by allowing the system administrators to check the settings of system files, including both the attributes (permissions, ownership, and the like) and the contents of the system files. It warns the users of potential security problems and, where appropriate, sets the system files automatically according to the security level specified.
The security level for aset can be specified by setting the -l command line option or the ASETSECLEVEL environment variable to be one of 3 values: low, med, or high. All the functionality operates based on the value of the security level.
At the low level, aset performs a number of checks and reports any potential security weaknesses.
At the med level, aset modifies some of the settings of system files and parameters, thus restricting system access, to reduce the risks from security attacks. Again reports the security weaknesses and the modifications performed to restrict access. This does not affect the operations of system services. All the system applications and commands maintain all of their original functionality.
At the high level, further restrictions are made to system access, rendering a very defensive system. Security practices which are not normally required are included. Many system files and parameters settings are modified to minimum access permissions. At this level, security is the foremost concern, higher than any other considerations that affect system behavior. The vast majority of system applications and commands maintain their functionality, although there may be a few that exhibit behaviors that are not familiar in normal system environment.
More exact definitions of what exactly aset does at each level can be found in the System Administration Guide: Basic Administration. The asetenv(4) file and the master files determine to a large extent what aset performs at each level, and can be used by the experienced administrators to redefine the definitions of the levels to suit their particular needs. See asetmasters(4). These files are provided by default to fit most security conscious environments and in most cases provide adequate security safeguards without modification. They are, however, designed in a way that can be easily edited by experienced administrators with specific needs.
aset can be periodically activated at the specified security level with default definitions using the -p option. aset is automatically activated at a frequency specified by the administrator starting from a designated future time (see asetenv(4)). Without the -p option, aset operates only once immediately.
The following options are supported:
Specifies a working directory other than /usr/aset for ASET. /usr/aset is the default working directory. It is where ASET is installed, and is the root directory of all ASET utilities and data files. If another directory is to be used as the ASET working directory, you can either define it with the -d option, or set the ASETDIR environment variable before invoking aset. The command line option, if specified, overwrites the environment variable.
Specifies a security level, low, med, or high, for aset to operate at. The default level is low. Each security level is explained in detail above. The level can also be specified by setting the ASETSECLEVEL environment variable before invoking aset. The command line option, if specified, overwrites the environment variable.
Notifies user at machine host. Send the output of aset to user through e-mail. If this option is not specified, the output is sent to the standard output. Note that this is not the reports of ASET, but rather an execution log including error messages if there are any. This output is typically brief. The actual reports of ASET are found in the /usr/aset/reports/latest directory. See the -d option.
Schedules aset to be executed periodically. This adds an entry for aset in the /etc/crontab file. The PERIODIC_SCHEDULE environment variable in the /usr/aset/asetenv file is used to define the time for execution. See crontab(1) and asetenv(4). If a crontab(1) entry for aset already exists, a warning is produced in the execution log.
Specifies a file containing a list of users. aset performs environment checks, for example, UMASK and PATH variables, on these users. By default, aset only checks for root. userlist_file is an ASCII text file. Each entry in the file is a line that contains only one user name (login name).
The following paragraphs discuss the features provided by ASET. Hereafter, each feature is referred to as a task. The first task, tune, is executed only once per installation of ASET. The other tasks are executed periodically at the specified frequency.
This task is used to tighten system file permissions. In standard releases, system files or directories have permissions defined to maximize open information sharing. In a more security conscious environment, the administrator may want to redefine these permission settings to more restrictive values. aset allows resetting of these permissions, based on the specified security level. Generally, at the low level the permissions are set to what they should be as released. At the medium level, the permissions are tightened to ensure reasonable security that is adequate for most environments. At the high level they are further tightened to very restrictive access. The system files affected and the respective restrictions at different levels are configurable, using the tune.low, tune.med, and tune.high files. See asetmasters(4).
System directories that contain relatively static files, that is, their contents and attributes do not change frequently, are examined and compared with a master description file. The /usr/aset/masters/cklist.level files are automatically generated the first time the cklist task is executed. See asetenv(4). Any discrepancy found is reported. The directories and files are compared based on the following:
owner and group
size and checksum (if file)
number of links
last modification time
The lists of directories to check are defined in asetenv(4), based on the specified security level, and are configurable using the CKLISTPATH_LOW , CKLISTPATH_MED , and CKLISTPATH_HIGH environment variables. Typically, the lower level lists are subsets of the higher level lists.
aset checks the consistency and integrity of user accounts and groups as defined in the passwd and group databases, respectively. Any potential problems are reported. Potential problems for the passwd file include:
passwd file entries are not in the correct format.
User accounts without a password.
Duplicate user names.
Duplicate user IDs. Duplicate user IDs are reported unless allowed by the uid_alias file. See asetmasters(4)).
Invalid login directories.
If C2 is enabled, check C2 hidden passwd format.
Potential problems for the group file include:
Group file entries not in the right format.
Duplicate group names.
Duplicate group IDs.
Null group passwords.
aset checks the local passwd file. If the YPCHECK environment variable is set to true, aset also checks the NIS passwd files. See asetenv(4). Problems in the NIS passwd file are only reported and not corrected automatically. The checking is done for all three security levels except where noted.
aset checks various system configuration tables, most of which are in the /etc directory. aset checks and makes appropriate corrections for each system table at all three levels except where noted. The following discussion assumes familiarity with the various system tables. See the manual pages for these tables for further details.
The operations for each system table are:
The default file contains a single "+" line, thus making every known host a trusted host, which is not advised for system security. aset performs the following operations:
Warns the administrators about the "+" line.
Warns about and deletes that entry.
The following entries for system daemons are checked for possible weaknesses.
tftp(1) does not do any authentication. aset ensures that in.tftpd(1M) is started in the right directory on the server and is not running on clients. At the low level, it gives warnings if the mentioned condition is not true. At the medium and high levels it gives warnings, and changes (if necessary) the in.tftpd entry to include the -s /tftpboot option after ensuring the directory /tftpboot exists.
rexd is also known to have poor authentication mechanism. aset disables rexd for medium and high security levels by commenting out this entry. If rexd is activated with the -s (secure RPC) option, it is not disabled.
The decode alias of UUCP is a potential security weakness. aset disables the alias for medium and high security levels by commenting out this entry.
The CONSOLE= line is checked to allow root login only at a specific terminal depending on the security level:
No action taken.
Adds the following line to the file:
aset checks for world-readable or writable device files for mounted file systems.
aset checks for file systems that are exported without any restrictions.
aset makes these files not world-writable for the high level (some applications may not run properly with this setting.)
The usage of a .rhosts file for the entire system is not advised. aset gives warnings for the low level and moves it to /.rhosts.bak for levels medium and high.
aset checks critical environment variables for root and users specified with the -u userlist_file option by parsing the /.profile, /.login, and /.cshrc files. This task checks the PATH variable to ensure that it does not contain `.' as a directory, which makes an easy target for trojan horse attacks. It also checks that the directories in the PATH variable are not world-writable. Furthermore, it checks the UMASK variable to ensure files are not created as readable or writable by world. Any problems found by these checks are reported.
Newer versions of the EEPROM allow specification of a secure parameter. See eeprom(1M). aset recommends that the administrator sets the parameter to command for the medium level and to full for the high level. It gives warnings if it detects the parameter is not set adequately.
At the high security level, aset takes proper measures such that the system can be safely used as a firewall in a network. This mainly involves disabling IP packets forwarding and making routing information invisible. Firewalling provides protection against external access to the network.
Specify ASET's working directory. Defaults to /usr/aset.
Specify ASET's security level. Defaults to low.
Specify the tasks to be executed by aset. Defaults to all tasks.
directory of ASET reports
See attributes(5) for descriptions of the following attributes: