|Skip Navigation Links|
|Exit Print View|
|Sun Blade 6000 Virtualized Multi-Fabric 10GbE M2 Network Express Module User's Guide Sun Blade 6000 Virtualized Multi-Fabric 10GbE M2 Network Express Module Documentation Library|
Normally, you connect to the ILOM through the Ethernet. When the NEM is installed in the chassis, its ILOM is automatically accessible on the same subnet as the CMM ILOM. You can also connect to the ILOM through the CMM or NEM serial connector.
Note - The CMM ILOM in the chassis has an Ethernet switch that supports connections to the Virtualized M2 NEM and its ILOMs. To use this connection, you must be connected to the same subnet as the ILOM, and you must know the Virtualized M2 NEM ILOM’s Ethernet address.
You can connect to the ILOM on your NEM using one of the methods shown in the following table:
Table 8 ILOM Connection Options
The following illustration shows a graphical representation of the ILOM connection options.