Skip Navigation Links | |
Exit Print View | |
Sun Server X2-8 Product Documentation Sun Server X2-8 (formerly Sun Fire X4800 M2) Documentation Library |
Administration, Diagnostics, and Service
Overview of the Diagnostics Guide
Introduction to System Diagnostics
How to Gather Service Visit Information
How to Troubleshoot Power Problems
How to Externally Inspect the Server
How to Internally Inspect the Server
How to Isolate and Replace Faulty DIMM Pairs
How to Isolate and Correct Persistent DIMM Errors
How to Detect DIMM Errors Using BIOS POST and the Oracle ILOM SEL
How to Detect DIMM Errors Using the CE Log
Default BIOS Power-On Self-Test (POST) Events
Using Oracle ILOM to Monitor the Host
Viewing the Oracle ILOM Sensor Readings
How to Use the Oracle ILOM Web Interface to View the Sensor Readings
How to View Fault Status Using the Oracle ILOM Web Interface
How to View Fault Status Using the Oracle ILOM Command-Line Interface
How to Clear Faults Using the Oracle ILOM Web Interface
How to Clear Faults Using the Oracle ILOM Command-Line Interface
Viewing the Oracle ILOM System Event Log
How to View the System Event Log Using the Oracle ILOM Web Interface
How to View the System Event Log With the Oracle ILOM Command-Line Interface
How to Clear the System Event Log Using the Oracle ILOM Web Interface
How to Clear the System Event Log Using the Oracle ILOM Command-Line Interface
Interpreting Event Log Time Stamps
How to Reset the Oracle ILOM SP Using the Web Interface
How to Reset the Oracle ILOM SP Using the Command-Line Interface
Creating a Data Collector Snapshot
How to Create a Snapshot With the Oracle ILOM Web Interface
How to Create a Snapshot With the Oracle ILOM Command-Line Interface
Using SunVTS Diagnostics Software
Introduction to SunVTS Diagnostic Test Suite
How to Diagnose Server Problems With the Bootable Diagnostics CD
Performing Pc-Check Diagnostic Tests
How to Run Pc-Check Diagnostics
How to Perform Immediate Burn-In Testing
How to Create and Save Scripts for Deferred Burn-in Testing
How to View Pc-Check Files With the Text File Editor
How to View Test Results Using Show Results Summary
How to Print the Results of Diagnostics Tests
U-Boot Diagnostic Start-Up Tests
Running the U-Boot Diagnostic Tests and Viewing the Results
How to Run the U-Boot Diagnostic Tests
Sample SP Environmental Variables Showing U-Boot Test Status
Before You Begin
This procedure requires Read Only (o) permission.
->cd target
->show
where target is the sensor that you want to view.
For example, you can specify the following path to view a temperature reading of the system's ambient air intake:
->cd /SYS/T_AMB
->show
The properties that describes the sensor target appear. For example:
Properties: type = Temperature ipmi_name = T_AMB class = Threshold Sensor value = 18.000 degree C upper_nonrecov_threshold = 45.000 degree C upper_critical_threshold = 40.000 degree C upper_noncritical_threshold = N/A lower_noncritical_threshold = N/A lower_critical_threshold = N/A lower_nonrecov_threshold = N/A alarm_status = cleared
->cd target
->show
where target is the sensor that you want to view.
The properties that describe the discrete sensor target appear. For example:
Type = Entity Presence
Class = Discrete Indicator
Value = Present
For specific details about the type of discrete or threshold sensor targets you can access, as well as the paths to access them, refer to the Oracle Integrated Lights Out Manager (ILOM) 3.0 Supplement for the Sun Server X2-8 (formerly Sun Fire X4800 M2).