Skip Navigation Links | |
Exit Print View | |
Sun Blade 6000 Virtualized 40 GbE Network Express Module Product Notes |
Product Compatibility Information
Supported Software and Firmware
Available Firmware and Software
Hardware and Networking Issues
sxge Device Corresponding to Port 1 Cannot Communicate with External Hosts in 40G or 1G Mode
CMM Minimum Version and CMM ILOM Upgrade Requirement (7046303)
Cannot Unload sxge When Interfaces are Unplumbed (7045733)
Hot Plug is Not Supported by VMware
PCI Correctable Errors Might Occur When Using NEM (7012350 and 7064505)
Hot Plug is Not Supported by Windows 2008 R2 with Sun Blade X6270 M2 and NEM (7050066)
Sometimes sxge Ports Fail to Enumerate During Hot-plug with Sun Blade X6270 M2 Blades (7087921)
ILOM Web GUI Reports Error: “Command Failed” (16092938)
Highest Lane Number in show peu Output is Incorrect (7039713)
Unable to Access NEM by Clicking on Graphic from the CMM ILOM Web GUI (7099903)
The following table lists the supported storage and server modules and associated fabric express modules (FEMs) and RAID Expansion Modules (REMs) that are supported for use with the NEM.
Note - The Sun Blade Storage Module M2 is the only storage module that is supported for use with the NEM.
Note - The NEM is compatible only with the A90-D and 7105379 version of the Sun Blade 6000 Chassis.
The Sun Blade 6000 Virtualized 40 GbE Network Express Module cannot be used with other NEMs (no mixing).
|
Note - The FEM must be installed in FEM 0 and FEM 1 PCIe-2 Pass-Through FEM motherboard connectors.
Note - The SPARC T3-1B Server Module only supports PCIe Gen1.