Display Server Components (Oracle ILOM)

The Oracle ILOM show components command displays real-time information about the components installed in the server. This information includes the target name for each component.

• At the Oracle ILOM prompt, type:

  ---

  Note - This is a sample of show components output. Specific components will vary based on each server.

  ---

  -> show components
  Target              | Property               | Value 
  --------------------+------------------------+-------------------
  /SYS/MB/RISER0/     | component_state        | Enabled
  PCIE0               |                        |
  /SYS/MB/RISER0/     | component_state        | Disabled
  PCIE3 
  /SYS/MB/RISER1      | component_state        | Enabled
  PCIE1               |                        |
  /SYS/MB/RISER1/     | component_state        | Enabled
  /SYS/MB/NET         | component_state        | Enabled
  /SYS/MB/NET1        | component_state        | Enabled
  /SYS/MB/NET2        | component_state        | Enabled
  

  ---

  Note - The target names displayed by Oracle ILOM commands might begin with /System or /SYS, depending on your situation.

  ---

Related Information

• Locate Device Paths (OpenBoot)