/usr/lib/nfs/nfsd [-a] [
-c #_conn] [-l
listen_backlog]
[-p protocol] [-t
device] [nservers]
nfsd is the daemon that handles client file system requests. Only users with {PRIV_SYS_NFS} and sufficient privileges to write to /var/run can run this daemon.
The nfsd daemon is automatically invoked using share(1M) with the –a option.
By default, nfsd starts over the TCP and UDP transports for versions 2 and 3. By default, it starts over the TCP for version 4. You can change this with the –p option.
A previously invoked nfsd daemon started with or without options must be stopped before invoking another nfsd command.
To change startup parameters for nfsd, use the sharectl(1M) command.
The nfsd service is managed by the service management facility, smf(5), under the service identifier:
svc:/network/nfs/server
Administrative actions on this service, such as enabling, disabling, or requesting restart, can be performed using svcadm(1M). The service's status can be queried using the svcs(1) command.
If nfsd is killed with SIGTERM, it will not be restarted by the service management facility. Instead, nfsd can be restarted by other signals, such as SIGINT.
The sharectl(1M) command can be used to manage all the parameters related to nfsd. The following parameters are currently supported:
The NFS server only uses NFS versions in the range specified by these variables. Valid values or versions are: 2, 3, and 4. If one or both of these parameters are left unset, the default minimum version is 2, while the default maximum version is 4.
By default, this variable is on and the NFS server provides delegations to clients. The user can turn off delegations for all exported file systems by setting this variable to off (case-sensitive). This variable applies only to NFS Version 4.
Sets the maximum number of concurrent, connection-oriented connections. The default is unlimited and is obtained by setting to -1. Equivalent to the –c option in nfsd.
Set connection queue length for the NFS over a connection-oriented transport. The default value is 32, meaning 32 entries in the queue. Equivalent to the –l option in nfsd.
Start nfsd over the specified protocol only. Equivalent to the -p option in nfsd. ALL is equivalent to –a on the nfsd command line. Mutually exclusive of NFS SMF parameter device. One or the other of NFS SMF parameters device and protocol must not be set. If both are set, the nfs/server service goes into maintenance mode. For the UDP protocol, only version 2 and version 3 service is established. NFS Version 4 is not supported for the UDP protocol. Equivalent to the –p option.
Start NFS daemon for the transport specified by the specified device only. Equivalent to the –t option in nfsd. Mutually exclusive of NFS SMF parameter protocol. One or the other of NFS SMF parameters device and protocol must not be set.
Maximum number of concurrent NFS requests. The default is 1024. Equivalent to the nservers operand.
By default, this variable is on and the NFS server accepts the numeric UIDs and GIDs from NFS clients using AUTH_SYS authentication and returns numeric UIDs and GIDs to clients using AUTH_SYS. To turn off this behaviour, set the variable to 'off' (case-sensitive).This variable applies only to NFS Version 4 and is intended to ease migration from NFSv2/v3.
See EXAMPLES, below.
The following options are supported:
Start an NFS daemon over all available connectionless and connection-oriented transports, including UDP and TCP. Equivalent of setting the protocol parameter to ALL in the SMF for NFS using the sharectl(1M) command.
This sets the maximum number of connections allowed to the NFS server over connection-oriented transports. By default, the number of connections is unlimited. Equivalent of the max_connections parameter in the SMF for NFS using the sharectl(1M) command.
Set connection queue length for the NFS TCP over a connection-oriented transport. The default value is 32 entries. Equivalent of the listen_backlog parameter in the SMF for NFS using the sharectl(1M) command.
Start a NFS daemon over the specified protocol. Equivalent of the protocol parameter in the SMF for NFS using the sharectl(1M) command.
Start a NFS daemon for the transport specified by the given device. Equivalent of the device parameter in the SMF for NFS using the sharectl(1M) command.
The following operands are supported:
This sets the maximum number of concurrent NFS requests that the server can handle. This concurrency is achieved by up to nservers threads created as needed in the kernel. nservers should be based on the load expected on this server. 16 is the usual number of nservers. If nservers is not specified, the maximum number of concurrent NFS requests will default to 1. Equivalent of the servers parameter in the SMF for NFS using the sharectl(1M) command.
If the nfs_portmon variable is set in /etc/system , then clients are required to use privileged ports (ports < IPPORT_RESERVED) to get NFS services. This variable is equal to zero by default. This variable has been moved from the “nfs” module to the “nfssrv” module. To set the variable, edit the /etc/system file and add this entry:
set nfssrv:nfs_portmon = 1
The nfsd properties specified in these examples are described under “SMF Management,” above.
Delegation is an NFSv4 feature in which the server delegates the management of a file to a client. For example, the server could grant (or not grant) either a read delegation or a write delegation to a client. The following command does this, setting the server_delegation property to off.
# sharectl set -p server_delegation=off nfsExample 2 Determining Value of Delegation
The following command obtains the current value of the server_delegation property.
# sharectl get -p server_delegation nfs server_delegation=onExample 3 Setting Maximum Number of Concurrent Requests
The following command sets the maximum number of concurrent NFS requests.
# sharectl set -p servers=32 nfsExample 4 Setting Connection Queue Length
The following command sets the maximum queue length for the NFS over a connection-oriented transport.
# sharectl set -p listen_backlog=48 nfs
Daemon started successfully.
Daemon failed to start.
Client machine pointer to an open-but-unlinked file.
System configuration information file.
Directories used by the server to manage client state information. These directories should not be removed.
See attributes(5) for descriptions of the following attributes:
|
ps (1), svcs(1) , mountd(1M), share(1M), sharectl(1M), svcadm(1M), sharetab (4), system (4), attributes (5), smf(5)
Managing Network File Systems in Oracle Solaris 11.2
Manually starting and restarting nfsd is not recommended. If it is necessary to do so, use svcadm to enable or disable the nfs service (svc:/network/nfs/server). If it is disabled, it will be enabled by share_nfs(1M), unless its application/auto_enable property is set to false. See the Managing Network File Systems in Oracle Solaris 11.2 , and svcadm(1M) for more information.