Before You Begin
If you switch from a trunk aggregation to a DLMP aggregation, you must remove the switch configuration that was previously created for the trunk aggregation.
If you switch from a DLMP aggregation, you must ensure that all the links are on the same switch and the switch is configured for the aggregation.
For more information, see Using Your Assigned Administrative Rights in Securing Users and Processes in Oracle Solaris 11.2 .
# dladm show-aggr
The output MODE field indicates the current type of the aggregation. The value of MODE is trunk for a trunk aggregation and dlmp for a DLMP aggregation.
# dladm modify-aggr -m mode aggr
where mode is trunk if you are switching to a trunk aggregation or dlmp if you are switching to a DLMP aggregation, and aggr is the name of the aggregation.
See the switch manufacturer's documentation for configuring the switch.
# dladm show-aggr
This example shows how to change an aggregation from a trunk aggregation to a DLMP aggregation.
# dladm show-aggr LINK MODE POLICY ADDRPOLICY LACPACTIVITY LACPTIMER aggr0 trunk L2 auto active short # dladm modify-aggr -m dlmp aggr0 # dladm show-aggr LINK MODE POLICY ADDRPOLICY LACPACTIVITY LACPTIMER aggr0 dlmp -- -- -- --
Once the aggregation is switched, you must remove the previous switch configuration that was applied to the trunk aggregation.