Oracle^® Solaris Cluster 4.3 System Administration Guide

How to Display the SCSI Protocol of a Single Storage Device

The phys-schost# prompt reflects a global-cluster prompt. Perform this procedure on a global cluster.

This procedure provides the long forms of the Oracle Solaris Cluster commands. Most commands also have short forms. Except for the long and short forms of the command names, the commands are identical.

1. Assume a role that provides solaris.cluster.read authorization.
2. From any node, display the SCSI protocol setting of the storage device.

   # cldevice show device

   device

   The name of the device path or a device name.

   For more information, see the cldevice(1CL)man page.

Example 48  Displaying the SCSI Protocol of a Single Device

The following example displays the SCSI protocol for the device /dev/rdsk/c4t8d0.

# cldevice show /dev/rdsk/c4t8d0


=== DID Device Instances ===                   

DID Device Name:                                /dev/did/rdsk/d3
  Full Device Path:                               phappy1:/dev/rdsk/c4t8d0
  Full Device Path:                               phappy2:/dev/rdsk/c4t8d0
  Replication:                                    none
  default_fencing:  global