Install Mounting Brackets Onto the Server
To install the mounting brackets onto the sides of the server:
- Position
a mounting bracket against the chassis so that the slide-rail lock
is at the server front, and the five keyhole openings on the mounting
bracket are aligned with the five locating pins on the side of the
chassis.
|
|
1
|
Chassis front
|
2
|
Slide-rail lock
|
3
|
Mounting bracket
|
4
|
Mounting bracket clip
|
|
- When the heads of the five chassis locating pins protrude through the five keyhole openings in
the mounting bracket, pull the mounting bracket toward the front of the chassis until
the mounting bracket clip locks into place with an audible click.
- Verify that the rear locating
pin has engaged the mounting bracket clip.
- Repeat Step 1 through Step 3 to
install the remaining mounting bracket on the other side of the
server.