|
|
|
|
|
|
Assigning a BRIDGE Network Address
To specify the complete network address to be used by the BRIDGE process placed on the LMID as its listening address, set the NADDR parameter as follows.
NADDR = string_value
The listening address for a BRIDGE is the location at which it is contacted by other BRIDGE processes participating in the application.
The listening address for a BRIDGE may also be specified in one of the following three forms:
In the first of these formats, host.name is resolved to the address of the TCP/IP host address at the time the address is bound. This format is based on locally configured name resolution facilities accessed via an operating system command. The value of port_number can be a symbolic name or a decimal number.
In the second format, the string #.#.#.# represents four decimal numbers (each of which is between 0 and 255), separated by periods. The value of port_number is a decimal number in the range 0 to 65535 (the hexadecimal representations of the string specified). The value of port_number can be a symbolic name or a decimal number.
In the third format, the string 0xhex-digits or \\xhex-digits must contain an even number of valid hex digits. A string in either of these forms is translated internally into a character array containing TCP/IP addresses.
Note: On some platforms lower numbers may be reserved for the system.
|
|
|
|
|
|
Copyright © 2000 BEA Systems, Inc. All rights reserved.
|