Figures

FIGURE 2-2 Example of a Server Room Layout

FIGURE 2-3 Example Configuration 1--Three Chassis, No External SCSI Devices

FIGURE 2-4 Example Configuration 2--Three Chassis, Two External SCSI Devices

FIGURE 2-5 Physical Specifications for the Netra CT Chassis, DC model

FIGURE 2-6 Physical Specifications for the Netra CT Chassis, AC model

FIGURE 2-7 Netra CT 810 Server Physical Specifications

FIGURE 2-8 Netra CT 410 Server Physical Specifications

FIGURE 2-10 Installing a Grounding Plate

FIGURE 3-1 Center-Mounting the Chassis

FIGURE 3-2 Installing the Mounting Bracket Adapters

FIGURE 3-3 Loosening the Screws at the Top of a Netra CT 810 Server

FIGURE 3-4 Loosening the Screws at the Top of a Netra CT 410 Server

FIGURE 3-5 Loosening the Screws at the Bottom of a Netra CT 810 Server

FIGURE 3-6 Loosening the Screws at the Bottom of a Netra CT 410 Server

FIGURE 3-7 Removing a Netra CT 810 Server From the Chassis

FIGURE 3-8 Removing a Netra CT 410 Server From the Chassis

FIGURE 3-9 Mounting the Netra CT Chassis in a Rack

FIGURE 3-10 Connecting the DC Grounding Cable to the DC Grounding Studs

FIGURE 4-1 Unpacking a Netra CT Server

FIGURE 4-2 Installing a Netra CT 810 Server in the Chassis

FIGURE 4-3 Installing a Netra CT 410 Server in the Chassis

FIGURE 4-4 Tightening the Screws at the Top of a Netra CT 810 Server

FIGURE 4-5 Tightening the Screws at the Top of a Netra CT 410 Server

FIGURE 4-6 Tightening the Screws at the Bottom of a Netra CT 810 Server

FIGURE 4-7 Tightening the Screws at the Bottom of a Netra CT 410 Server

FIGURE 5-1 Attaching the Antistatic Wrist Strap

FIGURE 5-2 Supported Locations for Satellite CPU or I/O Cards in a Netra CT 810 Server

FIGURE 5-3 Supported Locations for Satellite CPU or I/O Cards in a Netra CT 410 Server

FIGURE 5-4 Buses for the Netra CT 810 Server (Front View)

FIGURE 5-5 Buses for the Netra CT 410 Server (Front View)

FIGURE 5-6 Aligning the Card with the Card Cage Cutouts

FIGURE 5-7 Tightening the Ejection Lever Captive Screws

FIGURE 5-8 Supported Locations for Rear Transition Card Sets in a Netra CT 810 Server (Top View)

FIGURE 5-9 Supported Locations for Rear Transition Card Sets in a Netra CT 410 Server (Top View)

FIGURE 5-10 Supported and Unsupported Host CPU Rear Transition Card for a Netra CT Server

FIGURE 5-11 Aligning the Card With the Rear Card Cage Cutouts

FIGURE 6-2 Installing the Cable Management Brackets

FIGURE 6-3 Host CPU Card Locations

FIGURE 6-4 Connectors on the Host CPU Card

FIGURE 6-5 RJ-45 Ethernet Connector Diagram

FIGURE 6-6 CPU Card Front Panel TTY A Diagram

FIGURE 6-7 Host CPU Front Transition Card Location in a Netra CT 410 Server

FIGURE 6-8 Connectors on the Host CPU Front Transition Card (Netra CT 410 Server)

FIGURE 6-9 Parallel Connector

FIGURE 6-10 RJ-45 Ethernet B Connector Diagram

FIGURE 6-11 TTY B Connector

FIGURE 6-12 Supported Locations for a Single-Wide 6U Alarm Card

FIGURE 6-13 Location of Double-Wide 3U Alarm Card

FIGURE 6-14 Plugging in Cables in Alarm Card in Netra CT 810 Server

FIGURE 6-15 Plugging in Cables in Alarm Card in Diskless Netra CT 410 Server

FIGURE 6-16 Connectors on the Alarm Card in Diskfull Netra CT 410 Server

FIGURE 6-17 Alarm Port

FIGURE 6-18 RJ-45 Ethernet Connector Diagram

FIGURE 6-19 RJ-45 Ethernet Connector Diagram

FIGURE 6-20 CPU Rear Transition Card (CPU RTC) in a Netra CT 810 Server (Top View)

FIGURE 6-21 CPU Rear Transition Card (CPU RTC) in a Netra CT 410 Server (Top View)

FIGURE 6-22 Connectors on the CPU Rear Transition Card

FIGURE 6-23 RJ-45 Ethernet Connector Diagram

FIGURE 6-24 Supported Location for the Alarm Rear Transition Card in a Netra CT 810 Server (Top View)

FIGURE 6-25 Supported Location for the Alarm Rear Transition Card in a Netra CT 410 Server (Top View)

FIGURE 6-26 Connectors on the Alarm Rear Transition Card

FIGURE 6-27 RJ-45 Ethernet Connector Diagram

FIGURE 6-28 COM Ports 1 and 2

FIGURE 6-29 Alarm Port

FIGURE 6-31 Stripping the Insulation From the Wire

FIGURE 6-32 Opening the DC Input Plug Cage Clamp Using the Cage Clamp Operating Lever

FIGURE 6-33 Opening the Cage Clamp Using a Screwdriver

FIGURE 6-36 Routing the Wires Out of the Bottom Portion of the Strain Relief Housing

FIGURE 6-39 DC Connector Locations, Front-Access Model

FIGURE 6-41 Disconnecting the DC Input Power Cable From the DC Connector

FIGURE 6-42 Locating the DC Connectors

FIGURE 6-43 AC Connectors on a Netra CT Chassis

FIGURE 7-1 Locating the Power Supply Locking Mechanism on the Netra CT 810 Server

FIGURE 7-2 System Status Panel Locations

FIGURE 7-3 System Power Button and System Power LED Locations (Netra CT 810 Server)

FIGURE 7-4 System Power Button and System Power LED Locations (Netra CT 410 Server)

FIGURE A-1 Locating the SCSI Port on the Host CPU Front Transition Card (Netra CT 410 Server)

FIGURE A-2 SCSI Connector on the CPU Rear Transition Card