Sun Fire X2200 M2 Server Service Manual

Sun Fire X2200 M2 Server Service Manual

819-6597-12

Preface

1. Sun Fire X2200 M2 Server Overview

1.1 Features

1.2 Operating System and Software

1.2.1 Preinstalled Software

1.2.2 Supported Operating Systems

1.2.3 Tools and Drivers CD Software

1.2.4 System Management

1.3 Hardware System Overview

1.3.1 Front and Rear Panels

1.3.2 Internal Components

1.4 Powering On and Powering Off the Server

To Apply Standby Power for Initial SP Configuration

To Power On Main Power Mode

To Shut Down Main Power Mode

1.5 Clearing the CMOS

To Clear the CMOS

1.6 Customer-Orderable Components

2. Troubleshooting

2.1 Troubleshooting Overview

2.2 Performing Visual Inspections

To Perform an External Visual Inspection

To Perform an Internal Visual Inspection

2.3 Troubleshooting Procedures

2.4 Getting Technical Assistance

3. Performing Diagnostics

3.1 Pc-Check Diagnostics Overview

To Access the Pc-Check Diagnostics Software

3.2 System Information Menu Options

3.3 Advanced Diagnostics Tests Menu Options

To Test the Hard Disk

3.4 Immediate Burn-in Testing

To Load Test Scripts

3.5 Deferring Burn-In Testing

To Defer Burn-In Testing

3.6 Creating Diagnostic Partition

3.6.1 Removing Existing Partitions From a Hard Disk

To Use the Erase Primary Boot Hard Disk Utility

To Use fdisk to Erase Hard Disk Partitions

3.6.2 Adding a Diagnostic Partition to the First Bootable Disk

To Add a Diagnostic Partition to the First Bootable Disk

3.6.3 Creating a Log File on the Diagnostic Partition

To Create a Log File on the Diagnostic Partition

3.6.4 Accessing the Diagnostic Partition on a RHEL System

To Access the Diagnostic Partition on a RHEL System

3.6.5 Accessing the Diagnostic Partition on the Solaris 10 Operating System

To Access the Diagnostic Partition on the Solaris 10 OS

3.6.6 Accessing the Diagnostic Partition on the Windows Server 2003 System

To Access the Diagnostic Partition on the Windows Server 2003 System

3.7 Show Results Summary

3.8 Print Results Report

3.9 About Pc-Check

3.10 Exit to DOS

4. Maintaining the Sun Fire X2200 M2 Server

4.1 Tools and Supplies Needed

4.2 Installation Precautions

4.2.1 ESD Precautions

4.2.2 Preinstallation Instructions

4.2.3 Postinstallation Instructions

4.3 Powering Off the Server and Removing the Cover

To Power Off the Server and Remove the Cover

4.4 Component Replacement Procedures

4.4.1 Replacing the I/O Board

To Remove the I/O Board

To Install the I/O Board

4.4.2 Replacing the PCIe Card and Riser Assembly

To Remove the Riser Assembly and PCIe Card.

To Install the PCIe Card and Riser Card Assembly

4.4.3 Replacing a Hard Disk Drive and Carrier

To Remove an HDD and Carrier

To Install the HDD and Carrier

4.4.4 Installing an LSI PCIe Card and Cables

4.4.4.1 Installing the LSI Card to Support SAS Hard Drive Installation

To Install the LSI Card to Support SAS Hard Drive Installation

4.4.4.2 Installing the LSI Card to Support SATA RAID

To Install the LSI Card to Support SATA RAID

4.4.5 Replcaing an ODD Drive Assembly

To Remove the ODD Drive Assembly

To Install the ODD Drive Assembly

4.4.6 Replacing an Air Duct

To Remove the Air Duct

To Install the Air Duct

4.4.7 Replacing the Power Supply

To Remove the Power Supply

To Install the Power Supply

4.4.8 Replacing Single Fans

To Remove the Fans

To Install a Fan Module

4.4.9 Replacing the Dual Blower Module

To Remove a Dual Blower Module

To Install a Dual Blower Module

4.4.10 DIMM Population Rules

4.4.11 Replacing Memory Modules

To Remove a DIMM

To Install a DIMM

4.4.12 Replacing System Battery

To Remove the System Battery

To Install the System Battery

4.4.13 Replacing a CPU and Heatsink

To Remove a CPU and Heatsink

To Install a CPU and Heatsink

To Install a New CPU and Heatsink

4.4.14 Replacing Cables

4.4.15 Motherboard

To Remove the Motherboard

To Install the Motherboard

4.4.16 Replacing the Firmware PROM

4.4.16.1 Removing the Firmware PROM

To Remove the Firmware PROM

4.4.16.2 Installing a Firmware PROM

To Install the Firmware PROM

A. System Specifications

A.1 Physical Specifications

A.2 Power Specifications

A.3 Environmental Specifications

A.4 Serial Connector Pin Assignments

B. Using the Tools and Drivers CD

B.1 Tools and Drivers CD Contents

B.2 Updating BIOS and BMC Firmware

B.2.1 Using a Local Server and DVD Drive to Update the Firmware

To Use a Local Server and DVD Drive to Update the Firmware

B.2.2 Using tftp and the CLI to Update the Firmware

To Uuse tftp and the CLI to Update the Firmware

B.2.3 Using the ELOM Web GUI to Update the Firmware

To Use the ELOM Web GUI to Update the Firmware

B.3 Booting the Tools and Drivers CD from a PXE Server

B.3.1 Setting up the Tools and Drivers CD Image on the PXE Server

To Set Up the PXE Server

B.3.2 Accessing the Tools and Drivers CD From the Target Server

To Access the Tools and Drivers CD From the Target Server

B.4 Broadcom NetXtreme Software

C. Installing the Server Into a Rack With Optional Slide Rails

C.1 Disassembling the Slide Rails Before Installation

To Disassemble the Slide Rails Before Installation

C.2 Installing the Mounting Brackets Onto the Server

To Install the Mounting Brackets Onto the Server

C.3 Attaching the Slide-Rail Assemblies to the Rack

To Attach the Slide-Rail Assemblies to the Rack

C.4 Installing the Server Into the Slide-Rail Assemblies

To Install the Server Into the Slide-Rail Assemblies

C.5 Installing the Cable Management Assembly

To Install the Cable Management Assembly

C.6 Verifying Operation of the Slide Rails and CMA

To Verify Operation of the Slide Rails and CMA

Index

Sun Fire X2200 M2 Server Service Manual

819-6597-12

Copyright © 2008, Sun Microsystems, Inc. All Rights Reserved.