About This Documentation (PDF and HTML)
Installing the Server Hardware
Location of the Rack Mounting Kit and the Shipping Bracket Kit
Installing the Server In a Rack
How to Remove Components to Reduce Weight
How to Install the Rack Mounting Hardware in the Rack
How to Insert the Server Into the Rack
Removing and Installing Shipping Brackets
The rack mounting hardware is compatible with a wide range of equipment racks that meet the following standards:
Four-post rack (mounting at both front and rear).
Note - Two-post racks are not compatible.
Rack must have 5RU space available.
Rack should have a horizontal opening and unit vertical pitch conforming to ANSI/EIA 310-D-1992 or IEC 60927 standards.
Distance between front and rear mounting planes between approximately 26 and 34.5 inches (660.4 mm and 876.3 mm).
Minimum clearance depth (to front cabinet door) in front of front rack mounting plane: 1 inch (25.4 mm).
Minimum clearance depth (to rear cabinet door) behind front rack mounting plane: 27.5 inches (700 mm).
Minimum clearance width (between structural supports and cable troughs) between front and rear mounting planes: 18 inches (456 mm).