How to Connect to the ILOM Web Interface - Sun Fire X4800 Server Product Documentation

Skip Navigation Links
Exit Print View
	Sun Fire X4800 Server Product Documentation

Oracle Technology Network

Document Information

Using This Documentation

Hardware Installation

Communicating With the ILOM and the System Console

Server Connections

About ILOM SP IP Addresses and the ILOM Interfaces

Determining the SP IP Address

How to Get the SP IP Address by Using the BIOS Setup Utility

How to Get the SP IP Address by Using a Serial Connection and the CLI

Connecting to the ILOM

How to Connect to the ILOM CLI Using the Serial Management Port

How to Connect to the ILOM CLI Using SSH

How to Connect to the ILOM Web Interface

Connecting to the System Console

How to Connect to the Server Locally (Physical Console)

How to Connect to the Host's Serial Console Using the ILOM Command-Line Interface

How to Connect Remotely Using the ILOM Web Interface

Operating System Installation

Administration, Diagnostics, and Service

How to Connect to the ILOM Web Interface

Before You Begin

Perform the hardware setup as described in the hardware setup documentation.
Apply standby power to the server by connecting AC power to the system power supply. See How to Apply Standby Power for Initial Service Processor Configuration.

Type the IP address of the ILOM SP in the browser locator box and press Enter. For example, if the IP address for your ILOM SP is 129.144.02.20, you would enter it as shown:
Log in to the web interface using the default user name, root, and the default password, changeme.

Copyright © 2010, 2014, Oracle and/or its affiliates. All rights reserved. Legal Notices

Previous

Next