Exit Print View | |
Sun Integrated Lights Out Manager (ILOM) 3.0 Supplement for the Sun Netra T6340 Server Module |
![]() |
Documentation, Support, and Training
Understanding ILOM for the Sun Netra T6340 Server Module
Chassis Monitoring Module Features
Resetting the Password to the Factory Default
Viewing and Configuring Host Control Information
Display the Host's MAC Address (CLI)
Display the Host's OpenBoot Version (CLI)
Display the Host's POST Version (CLI)
Specify Host Behavior When an Error Is Discovered During Diagnostics (CLI)
Specify Host Behavior When the Host Stops Running (CLI)
Managing Host Diagnostics and POST
Managing System User Interactions
Managing the Service Processor
Changing Service Processor Settings to Factory Defaults
Change Console Escape Characters (CLI)
Changing Configuration Policy Settings
Managing Power Usage and Monitoring Power Consumption
Monitoring Active System Faults
Managing Virtual Keyswitch Settings
Configuring the Host for Using Remote Console With OpenBoot
Configuring the Host for Using Remote Console With Solaris OS
Sensors on the Sun Netra T6340 Server Module
Indicators on the Sun Netra T6340 Server Module
Limits to Backward Compatibility
Create an ALOM CMT Compatibility Shell
Switch Between the ALOM CMT Shell and the Host Console
Return to the ILOM From the ILOM CMT Shell
Comparing ILOM and ALOM CMT Commands
Event Messages Available Through the ALOM Compatibility Shell
Service Processor Usage Event Messages
Environmental Monitoring Event Messages
This procedure describes how to view and configure several kinds of host information.
ILOM enables you to view or configure several host control features. There are six aspects to host control:
MAC address
OpenBoot version
POST version
HOST status
Auto Run On Error
Auto Restart Policy
Log in to the ILOM web interface as Administrator (root) to open the web interface.
Select Remote Control -> Host Control.
View the MAC address.
View the Hypervisor version.
View the OpenBoot version.
View the POST version.
View the System Firmware version.
View the Host status.
Select a value for Auto Run On Error, if desired.
Select a value for Auto Restart Policy, if desired.
Select a value for Boot Timeout, if desired.
Select a value for Boot Restart Policy, if desired.
Select a value for Maximum Boot Failures Allowed, if desired.
Select a value for Boot Failure Recovery, if desired.
Click on Save.