JavaScript is required to for searching.
Skip Navigation Links
Exit Print View
Sun Fire X4640 Server Service Manual     Sun Fire X4640 Server Documentation Library
search filter icon
search icon

Document Information

Using This Documentation

Product Downloads

About This Documentation (PDF and HTML)

We Welcome Your Comments

Change History

Sun Fire X4640 Server Service Manual Overview

Controlling Power and Performing Hardware Reset

About Power Modes

Powering the Server On and Off

Controlling Server Power Remotely

Resetting the Server Using the Reset Switch (SW2)

Removing and Installing Components

Important Safety Information

Antistatic Procedures and Precautions

Tools Required for Servicing the Sun Fire X4640 Server

Preparing the Server for Service and Operation

Removal and Replacement Procedures

List of Customer Replaceable Units and Field Replaceable Units

Identifying Components

Replacing the CMOS Battery (CRU)

Replacing or Adding a Hard Drive (CRU)

Replacing a CPU Module and Filler Card (CRU)

Replacing or Adding DIMMs (CRU)

How to Remove DIMMs

DIMM Population Rules

How to Install DIMMs

Replacing or Adding PCI Cards (CRU)

Replacing or Adding a Power Supply (CRU)

Replacing the Fan Tray (CRU)

Replacing the Service Processor Board (FRU)

Replacing the DVD Module (FRU)

Replacing the Power Distribution Board (FRU)

Replacing the Fan Tray Carriage (FRU)

Replacing the Front Panel Indicator Board (FRU)

Replacing the Front I/O Board (FRU)

Replacing a Hard Disk Backplane (FRU)

Replacing the Motherboard (FRU)

Updating Field-Replaceable Unit Information

How to Update the Server CPLDs

Configuring the System Using the BIOS Setup Utilities

BIOS and the BIOS Setup Utility

How to Configure the System BIOS

BIOS Setup Utility Screens

BIOS and Service Processor Updates

LSI BIOS Configuration Utility

Sun Fire X4640 Server References and Specifications

Sun Fire X4640 Server Features and Components

Sun Fire X4640 Server Front and Back Panel Features and Components

Sun Fire X4640 Server Specifications

Sun Fire X4640 Server Motherboard Jumpers and Switches

Sun Fire X4640 Server External LED Locations and Meanings

Locating the Sun Fire X4640 Server System Serial Number

Index

How to Install DIMMs

Before You Begin

  1. Prepare the server for service. See How to Prepare the Server for Service.
  2. Remove the appropriate CPU module. See How to Remove a CPU Module or Filler Card.
  3. Set the CPU module on an anti-static surface so that the DIMM slots face upward.
  4. Ensure that the DIMM slot ejectors at each end of the socket are fully open (rotated outward).
    image:An illustration showing how to install a DIMM.
  5. Align the notch in the bottom edge of the DIMM with the key in the DIMM socket.

    Note - Be sure that the DIMM slots are used according to the population rules for the CPU module. See DIMM Population Rules.


  6. Carefully press down evenly on both top corners of the DIMM until the ejectors snap over the cutouts in the left and right edges of the DIMM.
  7. Install the CPU module.
  8. Prepare the server for operation.

See Also