Configure LLDP Global Objects

Global objects are system-specific objects that are common for all interfaces in the system.

1. At switch 1, change the global configuration of LLDP.

   SEFOS# configure terminal
   SEFOS(config)# lldp transmit-interval 15
   SEFOS(config)# lldp holdtime-multiplier 2
   SEFOS(config)# lldp reinitialization-delay 5
   SEFOS(config)# lldp tx-delay 3
   SEFOS(config)# lldp notification-interval 10
   SEFOS(config)# lldp chassis-id-subtype local "switch"
   SEFOS(config)# end

   The values given to each parameter in this step are examples only.

2. Review the values of global configuration.

   SEFOS# show lldp
   LLDP is disabled
   Transmit Interval        : 15
   Holdtime Multiplier        : 2
   Reinitialization Delay    : 5
   Tx Delay            : 3
   Notification Interval    : 10
   Chassis Id SubType        : Local
   Chassis Id            : switch

3. Reset the LLDP global configuration to the default values.

   SEFOS# configure terminal
   SEFOS(config)# no lldp transmit-interval
   SEFOS(config)# no lldp holdtime-multiplier
   SEFOS(config)# no lldp reinitialization-delay
   SEFOS(config)# no lldp tx-delay
   SEFOS(config)# no lldp notification-interval
   SEFOS(config)# lldp chassis-id-subtype mac-addr
   SEFOS(config)# end

4. View the LLDP global configuration.

   SEFOS# show lldp
   LLDP is disabled
   Transmit Interval        : 30
   Holdtime Multiplier        : 4
   Reinitialization Delay    : 2
   Tx Delay            : 2
   Notification Interval    : 5
    
   Chassis Id SubType        : Mac Address
   Chassis Id            : 00:01:02:03:04:01