Sun Fire X2270 Server Installation Guide
820-5604-11
Contents |
1. Setting Up the Sun Fire X2270 Server Hardware
Safety and Compliance Information
Planning the Installation Process
Installing the Server Into a Rack With Optional Slide Rails
Powering On and Off the Server
To Apply Standby Power for Initial Service Processor Configuration
Setup Troubleshooting and Support
Troubleshooting the Sun Fire X2270 Server Setup
2. Setting Up the Sun Fire X2270 Server Software
Introduction to the Sun Integrated Lights Out Manager
Connecting to the ILOM Service Processor
Connecting to ILOM Using a Serial Connection
To Connect to ILOM Using a Serial Connection
Connecting to ILOM Using an Ethernet Connection
Configuring ILOM Using Dynamic Ethernet Settings
To Configure ILOM Ethernet Settings Using DHCP
Configuring ILOM Using Static Ethernet Settings
To Configure Static IP Addresses Using the Web Interface
To Configure Static IP Addresses Using the CLI
To Configure Static IP Addresses Using the BIOS Setup Utility
Setting Up Platform Operating System and Driver Software
3. Configuring the PreinstalledOpenSolaris Operating System
Configuring the Preinstalled OpenSolaris Operating System
Accessing the System Over the Network
Configure the Preinstalled OpenSolaris Operating System
Redirect the Console Output to the Video Port (Optional)
To Modify the GRUB Menu to Auto Boot (Optional)
Getting Started on OpenSolaris
OpenSolaris Operating System User Information
OpenSolaris User Documentation
Using the OpenSolaris Installation Program
Reinstalling the OpenSolaris Operating System
Download OpenSolaris Operating System
4. Configuring the Preinstalled Solaris 10 Operating System
Configuring the Preinstalled Solaris 10 Operating System
To Connect to the Server Using the Service Processor’s IP Address
To Connect to the Server Using a Terminal Program
Solaris 10 Operating System User Information
Accessing Solaris 10 OS User Documentation
Downloading Solaris 10 OS Software
Copyright © 2009 Sun Microsystems, Inc. All rights reserved.