Sun Blade X6275 Server Module Service Manual
Service Manual
820-6849-16
Contents |
1. Introduction to the Sun Blade X6275 Server Module
1.1 Sun Blade X6275 server module Overview
1.1.4 About the Sun Blade Modular System Chassis
1.1.4.1 Sun Blade 6048 Modular System Chassis
1.1.4.2 Sun Blade 6000 Modular System Chassis
1.1.5 About the Chassis Monitoring Module (CMM)
1.2.3 Environmental Specifications
1.2.4 Customer Replaceable Units (CRUs) and Field Replaceable Units (FRUs)
1.2.5 Components and Part Numbers
1.3 Illustrated Parts Breakdown
1.4 Sun Blade X6275 server module Front Panel LEDs and Features
1.5 Sun Blade X6275 server module Rear Panel Features
2. Preparing to Service the System
2.3 Obtaining the Serial Number
2.4 Powering Off the Server Module
2.4.1 Powering Off Using the SP CLI
2.4.2 Powering Off Using the SP Web Interface
2.5 Removing the Server Module From the Sun Blade Chassis
2.6 Performing Electrostatic Discharge and Antistatic Prevention Measures
2.6.1 Electrostatic Discharge Safety Measures
2.6.1.1 Using an Antistatic Wrist Strap
2.6.1.2 Using an Antistatic Mat
2.7 Removing the Server Module Top Cover
2.8 Using the Multi-Port Dongle Cable
2.8.1 Connecting the DB9 to RJ-45 Serial Adapter Cable
2.8.2 Attaching a Multi-Port Dongle Cable
To Light the Locate LED Using the ILOM Web Interface
To Light the Locate LED Using the ILOM CLI
To Darken the Locate LED Using the ILOM CLI
3. Servicing Server Module Components
3.1.1 Identifying Faulty DIMMs
3.1.6 Installing Flash Modules
3.2 Servicing the USB Drives (CRU)
3.2.2 Installing the USB Drive
3.3 Servicing a Processor and Heat Sink (FRU)
3.3.1 Identifying a Faulty Processor
3.3.2 Removing a Processor and Heat Sink
3.3.3 Installing a Processor and Heat Sink
3.5 Replacing the Motherboard Assembly (FRU)
3.6 Servicing the System Battery (CRU)
3.6.1 Removing and Replacing the RTC Battery
3.7 Resetting Passwords and Clearing CMOS NVRAM
3.7.2 Clearing NVRAM using BIOS
3.7.3 Resetting BIOS Passwords and NVRAM Using a Jumper
3.8 Recovering from Corrupt Service Processor Software
3.8.1 Recovering the SP Firmware Image using the Preboot Menu
3.8.1.2 To Recover the SP Firmware Image
3.8.2 Recovering the SP Firmware Using IPMI
3.9 Displaying and Updating FRU Information
How to Display FRUID Information
How to Back Up FRU Information
4. Returning the Server Module to Operation
4.1 Installing the Server Module Top Cover
4.2 Reinstalling the Server Module in the Sun Blade Chassis
4.3 Powering On the Server Module
A.1.3 BIOS Setup Utility Screens Overview
A.2.2 BIOS Advanced Menu Screens
A.2.5 BIOS Security Menu Screens
A.2.6 BIOS Chipset Menu Screens
Copyright © 2012, Oracle and/or its affiliates. All rights reserved.