| Sun Netra CP3220 Blade Server User’s Guide |     |
Sun Netra CP3220 Blade Server User’s Guide
820-1982-12
|
Contents |
1.4.2 Advanced Rear Transition Module
1.6.1 Required Hardware Components
1.6.2 Optional Hardware Components
1.7 Technical Support and Warranty
1.7.1 Locating the Blade Server Identification Information
2. Hardware Installation and Service
2.1 Safety and Tool Requirements
2.1.1 Equipment and Operator Safety
2.1.2 Materials and Tools Required
2.2 Installing the Blade Server
2.2.1 Preparing for the Installation
2.2.1.1 Check Power, Thermal, Environmental, and Space Requirements
2.2.1.2 Local Network IP Addresses and Host Names Worksheet
2.2.1.3 Installation Procedure Summary
2.2.2 Configuring the Hardware
2.2.2.1 Verify Chassis Fan Tray Upgrade
2.2.2.2 Installing Optional Components
2.2.2.3 Configuring the Advanced Rear Transition Module Hardware
2.2.3 Installing the Sun Netra CP3220 Blade Server in an ATCA Shelf
2.2.3.1 Installing an Advanced Rear Transition Module
2.2.3.2 Installing the Blade Server Into the Shelf
2.2.4 Connecting External I/O Cables
2.2.4.1 Connecting Cables to a System Console Running the Solaris OS
2.2.4.2 Connecting Cables to the System Console Not Running the Solaris OS
2.2.4.3 Netinstall Boot Device Map
2.3.1 Hot-Swapping the Sun Netra CP3220 Blade Server
2.3.2 Powering Off the Sun Netra CP3220 Blade Server
2.3.3 Removing the Sun Netra CP3220 Blade Server
2.3.5 Automatic Power-Off Events
2.3.6.2 Installing a DDR2 DIMM
2.3.7 Installing the Optional Compact Flash Card
2.3.8 Installing Optional AMC Cards
2.3.9 Adding or Replacing a TOD Clock Battery
2.3.10 Changing Jumper Settings
2.3.10.1 Clearing the CMOS Setting Using Jumper 1
2.3.10.2 Changing the OOS LED Color
2.3.11 Changing OOS LED Behavior
2.3.12 Resetting the Sun Netra CP3220 Blade Server
3.4 Configuring Sun Netra CP3220 For 1GbE or 10GbE Switches
3.5 Configuring Alternate OOS LED Behavior
Displaying Configuration of OOS LED Behavior
Setting Configuration of OOS LED Behavior
4. Configuring and Using BIOS Firmware
4.1.2.1 BIOS Option ROMs on the Sun Netra CP3220 Blade Server
4.1.2.2 AMD PowerNow! Feature Enabled by Default
4.1.3 Description of the BIOS Screens
4.2 Changing the Configuration of a BIOS Menu Item
4.3 Setting the Boot Device Using BIOS Setup Screens
4.4 Changing the BIOS Continuous Boot Setting
4.5 Setting Supervisor and User Passwords
4.6 Resetting the System Time and System Date
4.9 Use the Secondary BIOS Image
4.10 Perform a Live Firmware Upgrade
5.4.4 Trusted Platform Module (TPM)
5.4.5 Broadcom 5715C Gigabit Ethernet
5.4.6 Sun Dual 10-Gbit Ethernet/Quad 1-Gbit RGMII Network Interface Chip (Sun 10 GbE Multithreaded Networking ASIC)
5.5.2 EIDE/ATA for Compact Flash
A.2.2 PICMG Board Cooling Requirements
A.2.3 PICMG ARTM Cooling Requirements
A.3.3 Power Connector (Zone 1)
A.3.4 Data Transport Connector (Zone 2)
A.3.5 Advanced Rear Transition Module Connector (Zone 3)
| Sun Netra CP3220 Blade Server User’s Guide | 820-1982-12 | |
Copyright © 2009 Sun Microsystems, Inc. All rights reserved.