About This Documentation (PDF and HTML)
Download Server System Tools and Drivers
Sun Fire X2270 M2 Server Service Manual Organization
Sun Fire X2270 M2 Server Overview
Front and Rear External Features and Components
Maintaining the Sun Fire X2270 M2 Server
Preparing for Service and Operation
Antistatic Procedures and Precautions
How to Remove the Server from the Rack
How to Install the Server Into the Rack
How to Remove the Server Cover
How to Install the Server Cover
Powering On and Powering Off the Server
Component Replacement Procedures and Topic
Sun Fire X2270 M2 Server Service Procedures and Information
Using the Tools and Drivers CD
How to Backup Motherboard FRUID Information
BIOS Booting and Setup Considerations
This section describes important safety information to know before removing or installing parts in your Sun Fire server.
![]() | Caution - Hazardous voltage present. Never attempt to run the server with the covers removed. You must disconnect the power supply before servicing any of the components documented in this section. |
![]() | Caution - Equipment damage possible. The covers must be in place for proper air flow. |
For your protection, observe the following safety precautions when setting up your equipment:
Follow all Oracle cautions, warnings, and instructions marked on the equipment and described in Important Safety Information for Sun Hardware Systems.
Follow all cautions, warnings, and instructions marked on the equipment and described in the Sun Fire X2270 M2 Server Safety and Compliance Guide.
Ensure that the voltage and frequency of your power source match the voltage and frequency inscribed on the equipment's electrical rating label.
Follow the electrostatic discharge safety practices as described in this document.