Skip Navigation Links | |
Exit Print View | |
Oracle Integrated Lights Out Manager (ILOM) 3.0 Supplement for the Sun Fire X2270 M2 Server |
About This Documentation (PDF and HTML)
Overview of the ILOM Supplement
Supported ILOM 3.0 Feature Set
Sun Fire X2270 M2 Server Platform-Specific Features
Communicating With the ILOM and the System Console
Server Back Panel LEDs and Ports
About ILOM SP IP Addresses and the ILOM Interfaces
Connecting to the System Console
ILOM Platform Features for the Sun Fire X2270 M2 Server
Switching Serial Port Output Between SP and Host Console
Running IPMITool from the Host
Updating ILOM Firmware Using the IPMIflash Utility
Temperature and Voltage Readings
How to View the Sensors From the System BIOS
BIOS System Event Log Sensor Error List
Using ILOM to Monitor the Host
Determining Current Firmware Versions
Preparing for a Firmware Update
The Sun Fire X2270 M2 server includes several sensors that generate entries in the system event log (SEL) when the sensor crosses a threshold. Many of these readings are used to adjust the fan speeds and perform other actions, such as illuminating LEDs and powering off the chassis.
These sensors can also be configured to generate IPMI PET traps as described in the Oracle Integrated Lights Out Manager (ILOM) 3.0 SNMP and IPMI Procedures Guide.
Caution - Do not use any interface other than the Integrated Lights Out Manager CLI or web interface to alter the state or configuration of any sensor or LED. Doing so could void your warranty. |
This section contains the following sensor-related topics: