| Skip Navigation Links | |
| Exit Print View | |
|
Oracle Integrated Lights Out Manager (ILOM) 3.0 Supplement for the Sun Fire X2270 M2 Server |
| Skip Navigation Links | |
| Exit Print View | |
|
|
Oracle Integrated Lights Out Manager (ILOM) 3.0 Supplement for the Sun Fire X2270 M2 Server |
About This Documentation (PDF and HTML)
Overview of the ILOM Supplement
Supported ILOM 3.0 Feature Set
Sun Fire X2270 M2 Server Platform-Specific Features
Communicating With the ILOM and the System Console
Server Back Panel LEDs and Ports
About ILOM SP IP Addresses and the ILOM Interfaces
Connecting to the System Console
ILOM Platform Features for the Sun Fire X2270 M2 Server
How to Switch Serial Port Output Between the SP and the Host Console Using the Web Interface
How to Switch Serial Port Output Between the SP and the Host Console Using the CLI
Running IPMITool from the Host
Updating ILOM Firmware Using the IPMIflash Utility
How to View the Sensors From the System BIOS
BIOS System Event Log Sensor Error List
Using ILOM to Monitor the Host
Determining Current Firmware Versions
Preparing for a Firmware Update
You can switch the serial port output of the Sun Fire X2270 M2 server between the SP console (NET MGT) and the host console (COM1). By default, the SP console is connected to the system serial port. This feature is beneficial for Windows kernel debugging, as it enables you to view non-ASCII character traffic from the host console.
 | Caution - You should set up the network on the SP before attempting to switch the serial port owner to the host server. If a network is not set up, and you switch the serial port owner to the host server, you will be unable to connect via the CLI or web interface to change the serial port owner back to the SP. To change the serial port owner back to the SP, you must perform the procedures in "Restoring ILOM Access to the Serial Console" in the Sun Fire X2270 M2 Server Service Manual. |
|