Using vlan 1 as Shown in Various Examples in the Documentation Generates Error Codes (6968484) - Sun Network 10GbE Switch 72p Product Notes

Go to main content

Sun Network 10GbE Switch 72p Product Notes

Exit Print View

» ...Documentation Home » Sun Network 10GbE Switch 72p Documentation ... » Sun Network 10GbE Switch 72p Product Notes » Late-Breaking Information » Known Issues » Using vlan 1 as Shown in Various Examples in ...

Updated: November 2016

Sun Network 10GbE Switch 72p Product Notes

Document Information

Using This Documentation

Late-Breaking Information

Switch Documentation Reading Order

IPv6 Switching and Routing

PVRST+ Protocol

Data Center Bridging

Internet Group Management Protocol

Q-in-Q Tunneling

Server Load Balancer Layer 3

Uplink Port Trailing

Oracle ILOM 3.0 Features

Upgrading the Switch Firmware

Back Up the Current Configuration Before Upgrading

Download the Switch Firmware Package

Install the Switch Updates

Configuring the Switch

Configure 1Gbps Mode on SFP+ Interfaces

Fine Tune the VLAN Setup

Managing SEFOS Configurations

Configuring TACACS+

Manually Deleting Static Routes Does Not Affect the Corresponding SLB Entry (7123134)

PIMv6-SSM Mode is Not Supported in This Release (7114280)

Firmware Upgrade With the Web UI is Incomplete (7022295)

Changing the Default Value for default-vlan-id Could Result in VLAN Misconfiguration (7015004)

Some of the IGMP Conformance Results Do Not Match Expectations (7006297 and 6997415)

QoS - set algo-type tailDrop queue-drop-algo Does Not Work (6991230)

Packets Might Be Dropped When Using Q-in-Q Interop in Certain Configurations (6989048)

The no default-metric [,short(1-16)>] Command Does Not Work as Documented (6987482)

Using vlan 1 as Shown in Various Examples in the Documentation Generates Error Codes (6968484)

When Multiple Configuration Scripts Are Run in Parallel, SEFOS Can Crash (6936742)

The switch Command Line Option Is Unsupported

vrrp_v3: Role is incorrect for vlan with no premempt configuration after save/reboot (19547263)

SSL V3.0 POODLE DISABLE SSL V3 (19842635)

Re-configure IP address after a "no ip address", previous config re-appears (18794861)

Language:

Using `vlan 1` as Shown in Various Examples in the Documentation Generates Error Codes (6968484)

Workaround: Instead of using vlan 1 as shown in the product documentation, use any unused VLAN.

Copyright © 2010, 2016, Oracle and/or its affiliates. All rights reserved. Legal Notices