Removing the Bay Disk Drive

If the disk you are replacing used to contain metadevice state replicas, you may want to clear the replica from the disk before replacing it. Refer to the Netra User's Manual for more details.

1. Unlatch the drive bracket handle (on the bottom) to release it.

2. Pull the bracket handle out and swing it open 180 degrees until it makes contact with the chassis.

   ---

   Note -

   If you are removing a hard drive from the top of the chassis, then you will not be able to swing the bracket handle 180 degrees. Swing the bracket up and gently pull the drive out of the chassis.

   ---

3. Continue pushing the handle onto the chassis, applying mild pressure until the drive pops out from the connector.

4. Slide the drive out and set it on an antistatic mat.