About This Documentation (PDF and HTML)
Hardware Installation and Product Notes
Overview of the Sun Blade X6275 M2 Server Module
Installing and Powering On the Server Module
Overview of the Sun Blade X6275 M2 Server Module Product Notes
System Software Release Features
Hardware, Firmware, and BIOS Issues
Installing the Oracle Solaris Operating System
Installing Red Hat Enterprise Linux
Installing the SLES Operating System
Introduction to Oracle VM Installation
Creating a PXE Installation Image for Oracle VM
Introduction to Windows Installation
Getting Started With Windows Server 2008 Installation
Installing the Windows Server 2008 R2 Operating System
Updating Critical Drivers and Installing Supplemental Software
Incorporating Device Drivers into a WIM Image for WDS
Administration, Diagnostics, and Service
Overview of the ILOM Supplement
Managing Power Usage and Monitoring Power Consumption
Configuring the Server Power Restore Policy
Switching the Default Serial Port Output Between SP and Host Console
Indicators, Sensors, and Traps
Introduction to Diagnostic Tools
U-Boot Diagnostic Startup Tests
Accessing the Pc-Check Diagnostics Utility on the Tools and Drivers CD/DVD
Server Module and Components Overview
Preparation Procedures for Service and Operation
Component Removal and Installation Procedures
Troubleshooting Scenarios
Deferred Burn-In Testing
Entity Presence Sensors
NEM and Blade Presence Sensors
Voltage Sensors
Chassis Fan Failure Sensors
Chassis Fan Speed Sensors
Temperature and Power Sensors
Temperature and Power Sensors
Multi-Port Cable Connection Overview
Switching the Default Serial Port Output Between SP and Host Console
How to Log Into ILOM Using a Serial Connection
Finding the Serial Number and Accessing Warranty Support Information
Switching the Default Serial Port Output Between SP and Host Console
Environmental Specifications
Clearing Server and CMM Faults
Commonly Used Terms
Dimensions
Dimensions
Environmental Specifications
Environmental Specifications
How to Install Your Server Module
How to Install the Server Module in the Chassis
Environmental Specifications
Server Module and Components Overview
How to Prepare the Server Module for Operation
How to Prepare the Server Module for Service
How to Remove the Server Module from the Chassis
Environmental Specifications
How to Install the Server Module Top Cover
How to Remove the Server Module Top Cover
Product Description
Dimensions
Dimensions
How to Install the Server Module in the Chassis
How to Install the Server Module Filler Panel
How to Remove a Server Module Filler Panel
Preparing the Server for Service
Product Features
How to Recover the SP Firmware Using the Preboot Menu
Illustrated Parts Breakdown
How to Install the Service Processor Board
How to Remove the Service Processor Board
CRUs and FRUs
How to Prepare the Server Module for Service
Required Tools
About Your Server Module Shipment
How to Power Off the Server Module
How to Power Off the Server Module
Snapshot Utility
SNMP Traps
Standard ILOM Features
CMM and Node ILOM Overview
Service Processor
Configuring an ILOM IP Address
Commonly Used Terms
Resetting the Service Processor After an Update
Dimensions
Environmental Specifications
USB Flash Drive Specifications
Standalone Package-Based Diagnostics
U-Boot Diagnostic Startup Tests Overview
How to Configure a Static IP Address
Product Features
Environmental Specifications
SunVTS
Supported Windows Operating Systems
Installation Overview
Installing the SLES Operating System
Installing the SLES OS From the Distribution Media
Installing SLES From a PXE Server
Updating the SLES Operating System
Updating the SLES Operating System
How to Replace the System Battery
Product Description
PET Event Messages