Maintenance

Introduction

This section describes concepts and procedural instructions for performing hardware and software maintenance tasks. The graphic above illustrates locating a spare disk within the chassis by highlighting its name in the BUI Hardware Maintenance list.The Maintenance > Hardware screen of the BUI provides visual representations of the physical system components, allowing you to visually identify and locate hardware components and verify their status.

Software Updates can be applied in the System section of the interface, as well as viewing Logs and current Problems.

• Hardware - identify hardware components and verify their status

• 7120 Overview - view component diagrams and specifications

• 7320 Overview - view component diagrams, specifications, and cluster options

• 7420/7720 Overview - view component diagrams, specifications, and cluster options

• 7700 Overview - view component diagrams and specifications

• 7120, 7320, 7420, 7720 Maintenance Procedures - replace controller or cabinet drives, fans, power supplies, RAM, cards, risers, and batteries

• Disk Shelf Overview - view component diagrams and specifications

• Disk Shelf Maintenance Procedures - replace disk shelf components

• Hardware Faults - Connect to ILOM to diagnose hardware faults

• Expanding from 2 to 3 HBAs

• Expanding from 3 to 4 HBAs

Legacy platforms are described in associated sections as follows: 7110 Overview, 7210 Overview, 7310 Overview,7410 Overview, 7x10 Maintenance Procedures, J4400/J4500 Overview, also available in the Sun Storage 7000 Unified Storage Service Manual on http://wikis.sun.com/display/fishworks.

• System - view system disks, manage support bundles

• Updates - manage appliance software updates

• Configuration Backup - backup and restore appliance configuration

• Problems - view current problems

• Logs - view appliance logs

• Workflows - manage and execute workflows