Skip Navigation Links | |
Exit Print View | |
man pages section 3: Basic Library Functions Oracle Solaris 11 Information Library |
enable_extended_FILE_stdio(3C)
posix_spawnattr_getschedparam(3C)
posix_spawnattr_getschedpolicy(3C)
posix_spawnattr_getsigdefault(3C)
posix_spawnattr_getsigignore_np(3C)
posix_spawnattr_getsigmask(3C)
posix_spawnattr_setschedparam(3C)
posix_spawnattr_setschedpolicy(3C)
posix_spawnattr_setsigdefault(3C)
posix_spawnattr_setsigignore_np(3C)
posix_spawnattr_setsigmask(3C)
posix_spawn_file_actions_addclose(3C)
posix_spawn_file_actions_addclosefrom_np(3C)
posix_spawn_file_actions_adddup2(3C)
posix_spawn_file_actions_addopen(3C)
posix_spawn_file_actions_destroy(3C)
posix_spawn_file_actions_init(3C)
pthread_attr_getdetachstate(3C)
pthread_attr_getinheritsched(3C)
pthread_attr_getschedparam(3C)
pthread_attr_getschedpolicy(3C)
pthread_attr_setdetachstate(3C)
pthread_attr_setinheritsched(3C)
pthread_attr_setschedparam(3C)
pthread_attr_setschedpolicy(3C)
pthread_barrierattr_destroy(3C)
pthread_barrierattr_getpshared(3C)
pthread_barrierattr_setpshared(3C)
pthread_condattr_getpshared(3C)
pthread_condattr_setpshared(3C)
pthread_cond_reltimedwait_np(3C)
pthread_key_create_once_np(3C)
pthread_mutexattr_getprioceiling(3C)
pthread_mutexattr_getprotocol(3C)
pthread_mutexattr_getpshared(3C)
pthread_mutexattr_getrobust(3C)
pthread_mutexattr_setprioceiling(3C)
pthread_mutexattr_setprotocol(3C)
pthread_mutexattr_setpshared(3C)
pthread_mutexattr_setrobust(3C)
pthread_mutex_getprioceiling(3C)
pthread_mutex_reltimedlock_np(3C)
pthread_mutex_setprioceiling(3C)
pthread_rwlockattr_destroy(3C)
pthread_rwlockattr_getpshared(3C)
pthread_rwlockattr_setpshared(3C)
pthread_rwlock_reltimedrdlock_np(3C)
pthread_rwlock_reltimedwrlock_np(3C)
pthread_rwlock_timedrdlock(3C)
pthread_rwlock_timedwrlock(3C)
rctlblk_get_enforced_value(3C)
- memory allocator
cc [ flag ... ] file ... -lmalloc [ library ... ] #include <stdlib.h> void *malloc(size_t size);
void free(void *ptr);
void *memalign(size_t alignment, size_t size);
void *realloc(void *ptr, size_t size);
void *valloc(size_t size);
void *calloc(size_t nelem, size_t elsize);
#include <malloc.h> int mallopt(int cmd, int value);
struct mallinfo mallinfo(void);
The malloc() and free() functions provide a simple general-purpose memory allocation package.
The malloc() function returns a pointer to a block of at least size bytes suitably aligned for any use.
The argument to free() is a pointer to a block previously allocated by malloc(). After free() is performed, this space is made available for further allocation, and its contents have been destroyed. See mallopt() below for a way to change this behavior. If ptr is a null pointer, no action occurs.
Undefined results occur if the space assigned by malloc() is overrun or if some random number is handed to free().
The free() function does not set errno.
The memalign() function allocates size bytes on a specified alignment boundary and returns a pointer to the allocated block. The value of the returned address is guaranteed to be an even multiple of alignment. The value of alignment must be a power of two and must be greater than or equal to the size of a word.
The realloc() function changes the size of the block pointed to by ptr to size bytes and returns a pointer to the (possibly moved) block. The contents will be unchanged up to the lesser of the new and old sizes. If the new size of the block requires movement of the block, the space for the previous instantiation of the block is freed. If the new size is larger, the contents of the newly allocated portion of the block are unspecified. If ptr is NULL, realloc() behaves like malloc() for the specified size. If size is 0 and ptr is not a null pointer, the space pointed to is freed.
The valloc() function has the same effect as malloc(), except that the allocated memory will be aligned to a multiple of the value returned by sysconf(_SC_PAGESIZE).
The calloc() function allocates space for an array of nelem elements of size elsize. The space is initialized to zeros.
The mallopt() function provides for control over the allocation algorithm. The available values for cmd are:
Set maxfast to value. The algorithm allocates all blocks below the size of maxfast in large groups and then doles them out very quickly. The default value for maxfast is 24.
Set numlblks to value. The above mentioned ``large groups'' each contain numlblks blocks. numlblks must be greater than 0. The default value for numlblks is 100.
Set grain to value. The sizes of all blocks smaller than maxfast are considered to be rounded up to the nearest multiple of grain. grain must be greater than 0. The default value of grain is the smallest number of bytes that will allow alignment of any data type. Value will be rounded up to a multiple of the default when grain is set.
Preserve data in a freed block until the next malloc(), realloc(), or calloc(). This option is provided only for compatibility with the old version of malloc(), and it is not recommended.
These values are defined in the <malloc.h> header.
The mallopt() function can be called repeatedly, but cannot be called after the first small block is allocated.
The mallinfo() function provides instrumentation describing space usage. It returns the mallinfo structure with the following members:
unsigned long arena; /* total space in arena */ unsigned long ordblks; /* number of ordinary blocks */ unsigned long smblks; /* number of small blocks */ unsigned long hblkhd; /* space in holding block headers */ unsigned long hblks; /* number of holding blocks */ unsigned long usmblks; /* space in small blocks in use */ unsigned long fsmblks; /* space in free small blocks */ unsigned long uordblks; /* space in ordinary blocks in use */ unsigned long fordblks; /* space in free ordinary blocks */ unsigned long keepcost; /* space penalty if keep option */ /* is used */
The mallinfo structure is defined in the <malloc.h> header.
Each of the allocation routines returns a pointer to space suitably aligned (after possible pointer coercion) for storage of any type of object.
The malloc(), memalign(), realloc(), valloc(), and calloc() functions return a null pointer if there is not enough available memory. When realloc() returns NULL, the block pointed to by ptr is left intact. If size, nelem, or elsize is 0, either a null pointer or a unique pointer that can be passed to free() is returned. If mallopt() is called after any allocation or if cmd or value are invalid, a non-zero value is returned. Otherwise, it returns 0.
If malloc(), calloc(), or realloc() returns unsuccessfully, errno is set to indicate the error:
size bytes of memory exceeds the physical limits of your system, and cannot be allocated.
There is not enough memory available at this point in time to allocate size bytes of memory; but the application could try again later.
Unlike malloc(3C), this package does not preserve the contents of a block when it is freed, unless the M_KEEP option of mallopt() is used.
Undocumented features of malloc(3C) have not been duplicated.
Function prototypes for malloc(), realloc(), calloc(), and free() are also defined in the <malloc.h> header for compatibility with old applications. New applications should include <stdlib.h> to access the prototypes for these functions.
Comparative features of the various allocation libraries can be found in the umem_alloc(3MALLOC) manual page.
See attributes(5) for descriptions of the following attributes:
|
brk(2), bsdmalloc(3MALLOC), libmtmalloc(3LIB), malloc(3C), mapmalloc(3MALLOC), mtmalloc(3MALLOC), umem_alloc(3MALLOC), watchmalloc(3MALLOC), attributes(5)