Go to main content

SPARC and Netra SPARC T5 Series Servers Administration Guide

Exit Print View

» ...Documentation Home » SPARC T5-8 Documentation Library » SPARC and Netra SPARC T5 Series Servers ... » Configuring Hardware RAID » Determining if a Drive Has Failed » Display Status (sas2ircu Utility, LSI)

Updated: August 2016

SPARC and Netra SPARC T5 Series Servers Administration Guide

Document Information

Using This Documentation

Understanding System Administration Resources

Accessing the Server

Controlling the Server

Booting and Shutting Down the OS

Configuring Boot and Restart Behavior

Changing Server Identification Information

Configuring Policy Settings

Configuring SP and Host Network Addresses

Matching Devices to Device Names

Configuring Hardware RAID

Hardware RAID Support

Hardware RAID Guidelines

FCode-Based RAID Utility Commands

Prepare to Create a RAID Hardware Volume (FCode-based RAID Utility)

Create a Hardware RAID Volume

Hot-Spare Drives in RAID Volumes (LSI)

Determining if a Drive Has Failed

Service Required Drive LEDs

Locate Error Messages Related to Drives in a RAID Volume

Display Status (FCode-Based RAID Utility)

Display Status (sas2ircu Utility, LSI)

RAID Drive Replacement Strategies

Monitoring the Server

Updating the Firmware

Language:

Display Status (`sas2ircu` Utility, LSI)

Use the LSI sas2ircu utility to display the status of the RAID volume and its associated drives.
Refer to the SAS2 Integrated RAID Solution User Guide for more information about displaying and interpreting device status using the sas2ircu utility.

Related Information

Copyright © 2013, 2016, Oracle and/or its affiliates. All rights reserved.