Install Mounting Brackets
To install the mounting brackets onto the sides of the server:
- Position a mounting bracket against the chassis so that the slide-rail lock is at
the server front, and the five keyhole openings on the mounting bracket are
aligned with the five locating pins on the side of the chassis.
Figure 5 Aligning the Mounting Bracket With the Server Chassis
1 Chassis front
2 Slide-rail lock
3 Mounting bracket
4 Mounting bracket clip
- With the heads of the five chassis locating pins protruding through the five
keyhole openings in the mounting bracket, pull the mounting bracket toward the front
of the chassis until the mounting bracket clip locks into place with an audible
- Verify that the rear locating pin has engaged the mounting bracket clip.
- Repeat Step 1 through Step 3 to install the remaining mounting bracket on the other
side of the server.