Sun Blade X4-2B Server Module Fails When Launching Remote Console (18962552)
Dual 16 Gigabit/Sec Fibre Channel / 10Gbps FCoE Host Adapter, Emulex
BIOS MPS Setting Added (18364710 and 18317148 and 15752501)
Do Not Use Operating System Tools or Utilities to Manage UEFI Boot Variables (15818528)
One DIMM in a Channel Has an Uncorrectable Error, Other DIMMs Might Have Errors (16181966)
Hot-plugging 2 PCIe EMs Can Cause Correctable Error Messages (15752501)
Do Not Reboot the SP and Host Simultaneously (16346073 and 17013976)
Oracle ILOM restore_status Parameter Shows Partial Status (7167938)
Oracle Recommendations for Drive Slot Population and Virtual Drive Creation (7124194)
When Running an Emulex HBA in UEFI BIOS Boot Mode, the
Oracle System Assistant Issues
PXE booting the server fails when using a Cisco switch. This issue has two workarounds:
Router(config)#no spanning-tree
Switch>enable Switch#configure terminal Switch(config)#spanning-tree portfast default
To check the changes you made, run the following command:
Switch#show spanning-tree interface GigabitEthernet 0/48 portfast