Sun Blade X4-2B Server Module Fails When Launching Remote Console (18962552)
Dual 16 Gigabit/Sec Fibre Channel / 10Gbps FCoE Host Adapter, Emulex
BIOS MPS Setting Added (18364710 and 18317148 and 15752501)
Do Not Use Operating System Tools or Utilities to Manage UEFI Boot Variables (15818528)
Hot-plugging 2 PCIe EMs Can Cause Correctable Error Messages (15752501)
Do Not Reboot the SP and Host Simultaneously (16346073 and 17013976)
Oracle ILOM restore_status Parameter Shows Partial Status (7167938)
Oracle Recommendations for Drive Slot Population and Virtual Drive Creation (7124194)
PXE-booting Fails When Using Cisco Switch (7149683)
When Running an Emulex HBA in UEFI BIOS Boot Mode, the
Oracle System Assistant Issues
The following behavior is expected for DIMM uncorrectable (UE) errors:
If DIMM 0 in one channel has a UE, it will be mapped out. Subsequently, the DIMM1 and DIMM2 in the same channel will have training errors, then be mapped out also. Eventually the whole channel be disabled.
If a DIMM1 or DIMM2 in one channel has a UE, the failed DIMM will be mapped out, but the other DIMM is not impacted.
In either of these cases, a memory patrol scrub error on the mapped-out DIMM may occur.
Workaround
Update to SW 1.1 or later. This issue is corrected in SW 1.1. See Getting Server Firmware and Software Updates.