显示传感器列表

• 要查看受管理设备上的传感器列表，请键入：
  $ ipmitool -H SP_hostname_or_IPaddress -I lanplus -U username -P password
  sdr list

  输出可能会如下所示：

  /SYS/T_AMB       | 24 degrees C 		 	 	| ok
  /RFM0/FAN1_SPEED | 7110 RPM          | ok
  /RFM0/FAN2_SPEED | 5880 RPM          | ok
  /RFM1/FAN1_SPEED | 5880 RPM          | ok
  /RFM1/FAN2_SPEED | 6360 RPM          | ok
  /RFM2/FAN1_SPEED | 5610 RPM          | ok
  /RFM2/FAN2_SPEED | 6510 RPM          | ok
  /RFM3/FAN1_SPEED | 6000 RPM          | ok
  /RFM3/FAN2_SPEED | 7110 RPM          | ok
  /RFM4/FAN1_SPEED | 6360 RPM          | ok
  /RFM4/FAN2_SPEED | 5610 RPM          | ok
  /RFM5/FAN1_SPEED | 5640 RPM          | ok
  /RFM5/FAN2_SPEED | 6510 RPM          | ok
  /RFM6/FAN1_SPEED | 6180 RPM          | ok
  /RFM6/FAN2_SPEED | 6000 RPM          | ok
  /RFM7/FAN1_SPEED | 6330 RPM          | ok
  /RFM7/FAN2_SPEED | 6330 RPM          | ok
  /RFM8/FAN1_SPEED | 6510 RPM          | ok
  /RFM8/FAN2_SPEED | 5610 RPM          | ok
  

  ---

  注 -  上例中显示的传感器输出是节选的。实际输出取决于硬件平台。

  ---