查看和配置 SNMP 团体属性

1. 要转至 /SP/services/snmp 目录，请键入：

   -> cd /SP/services/snmp

2. 在该目录中，键入 show 命令查看 SNMP 设置。默认设置如下所示：

   -> show
      /SP/services/snmp
      Targets:
        communities
        mibs
        users
      Properties:
        engineid = (none)
        port = 161
        servicestate = enabled
        sets = disabled
        v1 = disabled
        v2c = disabled
        v3 = enabled 
     Commands: 
        cd
        set
        show
   

3. 要查看团体，请键入：

   -> show /SP/services/snmp/communities

   例如：

   -> show /SP/services/snmp/communities
   /SP/services/snmp/communities
   Targets:
     private
     public
   Properties:
   Commands:
     cd
     create
     delete
     show
   

4. 要创建具有读/写特权的团体，请键入：

   -> create /SP/services/snmp/communities/communityname permission=rw

5. 要查看公共团体，请键入：

   -> show /SP/services/snmp/communities/public

   例如：

   -> show /SP/services/snmp/communities/public
   /SP/services/snmp/communities/public
   Targets:
   Properties:
     permission = ro
   Commands:
     cd
     set
     show