Go to main content

Oracle Solaris Cluster 4.3 Reference Manual

Exit Print View

Updated: September 2015



SUNW.Proxy_SMF_scalable, Proxy_SMF_scalable - resource type for proxying scalable SMF services


The SUNW.Proxy_SMF_scalable resource type represents the proxy for scalable Service Management Facility (SMF) services.

Standard properties and extension properties that are defined for the SUNW.proxysmfscalable resource type are described in the subsections that follow. To set these properties for an instance of the SUNW.Proxy_SMF_scalable resource type, use the clresource command.

Standard Properties

See r_properties(5) for a description of the following resource properties.


Default: 3600

Minimum: 60


Default: 3600

Minimum: 60


Default: 3600

Minimum: 60


Default: 3600

Minimum: 60


Default: 3600

Minimum: 60


Default: 3600

Minimum: 60


Default: SOFT

Tunable: Any time


Default: ""

Tunable: Any time


Default: 2

Minimum: 0

Maximum: 3

Tunable: Any time


Default: 300

Maximum: 3600

Tunable: Any time


Default: 60

Tunable: Any time

Extension Properties


Includes information about the SMF services to be proxied by the resource. Its value is the path to a file that contains all the proxied SMF services. Each line in the file is dedicated to one SMF service and specifies svc fmri and the path to the corresponding service manifest file. For example, if the resource has to manage two services, restarter_svc_test_1:default and restarter_svc_test_2:default, the file should include the following two lines:



Note -  The entries above should each appear on a single line. They are broken into multiple lines here for legibility.

Default: ""

Tunable: When disabled


This example shows how to register the SUNW.Proxy_SMF_scalable resource type, create a resource group for the application, create the load balanced application resource, manage the resource group, enable all its resources, and bring its resources online.

Register the resource type:

# clresourcetype -f <path-to-rtrfile> SUNW.Proxy_SMF_scalable

Create a resource group called rg1 for the application:

# clresourcegroup create rg1

Create the failover application resource called myloadbalancedres:

# clresource create -t SUNW.Proxy_SMF_scalable -g rg1 \
-x proxied_service_instances="/usr/local/app/svc myloadbalancedres"

where /usr/local/app/svc is a text file.

Manage the resource group rg1:

# clresourcegroup manage rg1

Enable the myloadbalancedres resource:

# clresource enable myloadbalancedres

Use the following command to check the status of the application:

# clresource status

See Also

pmfadm(1M), scha_resource_get(1HA), clresourcetype(1CL), clresource(1CL), clresourcegroup(1CL), attributes (5), r_properties(5)

Oracle Solaris Cluster 4.3 Data Services Planning and Administration Guide