논리 드라이브의 레이블이 유효한지 확인하려면

1. 루트 사용자로 전환하고 format 명령을 실행합니다.

   # format
   Searching for disks...done
   AVAILABLE DISK SELECTIONS:
   	0. c1t0d0 <DEFAULT cyl 24611 alt 2 hd 27 sec 107>
   		/pci@0,0/pci1022,7450@a/pci17c2,10@4/sd@0,0
   	1. c1t1d0 <DEFAULT cyl 24810 alt 2 hd 27 sec 107>
   		/pci@0,0/pci1022,7450@a/pci17c2,10@4/sd@1,0
   	2. c3t8d0 <DEFAULT cyl 24619 alt 2 hd 27 sec 107>
   		/pci@0,0/pci1022,7450@b/pci1000,10c0@1,1/sd@8,0
   	3. c3t9d0 <DEFAULT cyl 24619 alt 2 hd 27 sec 107>
   		/pci@0,0/pci1022,7450@b/pci1000,10c0@1,1/sd@9,0
   	4. c3t10d0 <DEFAULT cyl 24619 alt 2 hd 27 sec 107>
   		/pci@0,0/pci1022,7450@b/pci1000,10c0@1,1/sd@a,0
   	5. c3t11d0 <DEFAULT cyl 24619 alt 2 hd 27 sec 107>
   		/pci@0,0/pci1022,7450@b/pci1000,10c0@1,1/sd@b,0
   	6. c3t12d0 <DEFAULT cyl 24619 alt 2 hd 27 sec 107>
   		/pci@0,0/pci1022,7450@b/pci1000,10c0@1,1/sd@c,0
   	7. c3t13d0 <DEFAULT cyl 24619 alt 2 hd 27 sec 107>
   		/pci@0,0/pci1022,7450@b/pci1000,10c0@1,1/sd@d,0
   Specify disk (enter its number): 
   

2. 프롬프트가 표시되면 방금 설치한 HBA 카드에 연결된 디스크 드라이브의 번호를 입력하고 Enter 키를 누릅니다.

   Format 메뉴가 표시됩니다.

   # format
   Searching for disks...done
   AVAILABLE DISK SELECTIONS:
   	0. c1t0d0 <DEFAULT cyl 24611 alt 2 hd 27 sec 107>
   		/pci@0,0/pci1022,7450@a/pci17c2,10@4/sd@0,0
   	1. c1t1d0 <DEFAULT cyl 24810 alt 2 hd 27 sec 107>
   		/pci@0,0/pci1022,7450@a/pci17c2,10@4/sd@1,0
   	2. c3t8d0 <DEFAULT cyl 24619 alt 2 hd 27 sec 107>
   		/pci@0,0/pci1022,7450@b/pci1000,10c0@1,1/sd@8,0
   	3. c3t9d0 <DEFAULT cyl 24619 alt 2 hd 27 sec 107>
   		/pci@0,0/pci1022,7450@b/pci1000,10c0@1,1/sd@9,0
   	4. c3t10d0 <DEFAULT cyl 24619 alt 2 hd 27 sec 107>
   		/pci@0,0/pci1022,7450@b/pci1000,10c0@1,1/sd@a,0
   	5. c3t11d0 <DEFAULT cyl 24619 alt 2 hd 27 sec 107>
   		/pci@0,0/pci1022,7450@b/pci1000,10c0@1,1/sd@b,0
   	6. c3t12d0 <DEFAULT cyl 24619 alt 2 hd 27 sec 107>
   		/pci@0,0/pci1022,7450@b/pci1000,10c0@1,1/sd@c,0
   	7. c3t13d0 <DEFAULT cyl 24619 alt 2 hd 27 sec 107>
   		/pci@0,0/pci1022,7450@b/pci1000,10c0@1,1/sd@d,0
   Specify disk (enter its number): 2
   selecting c3t8d0
   [disk formatted]
   

3. 두 프롬프트에서 q를 입력하여 테스트 및 Format 메뉴를 종료합니다.

   analyze> q
   FORMAT MENU:
   	 disk	 - select a disk
   	 type	 - select (define) a disk type
   	 partition	 - select (define) a partition table
   	 current	 - describe the current disk
   	 format	 - format and analyze the disk
   	 fdisk	 - run the fdisk program
   	 repair	 - repair a defective sector
   	 label	 - write label to the disk
   	 analyze	 - surface analysis
   	 defect	 - defect list management
   	 backup	 - search for backup labels
   	 verify	 - read and display labels
   	 save	 - save new disk/partition definitions
   	 inquiry	 - show vendor, product and revision
   	 scsi	 - independent SCSI mode selects
   	 cache	 - enable, disable or query SCSI disk cache
   	 volname	 - set 8-character volume name
   	 !<cmd>	 - execute <cmd>, then return
   	 quit
   format> q
   #