Guía de configuración de Oracle® Switch ES2-72 y Oracle Switch ES2-64

Salir de la Vista de impresión

Actualización: Abril de 2015
 
 

Configurar LA

Esta tarea describe cómo configurar y probar la función LA del SEFOS en un conmutador de destino.

Consulte Switching Feature Topology para obtener la topología de esta tarea.

  1. Configure los parámetros iniciales.

    Consulte Configure Initial Settings.

  2. Cree un grupo de canal de puertos 100 en SEFOS-1 y enlace los puertos en el grupo.
    SEFOS-1# configure terminal
    SEFOS-1(config)# set port-channel enable
    SEFOS-1(config)# interface port-channel 100
    SEFOS-1(config-if)# no shutdown
    SEFOS-1(config-if)# exit
    SEFOS-1(config)# interface range xl-ethernet 0/1-2
    SEFOS-1(config-if)# no shutdown
    SEFOS-1(config-if)# channel-group 100 mode active
    SEFOS-1(config-if)# exit
    SEFOS-1(config)# vlan 101
    SEFOS-1(config-vlan)# ports xl-ethernet 0/1-2 port-channel 
    SEFOS-1(config-vlan)# ports xl-ethernet 0/25-26 port-channel 100 untagged xl-ethernet 0/25-26 port-channel 100
    
  3. Repita el Step 2 en SEFOS-2.
  4. Verifique la pertenencia de VLAN.
    SEFOS-1# show vlan
    Vlan database
    -------------
    Vlan ID : 101
    Member Ports : X10/25,X10/26,po100
    Untagged Ports : X10/25,X10/26,po100
    Forbidden Ports : None
    Reflective-Relay : Disabled
    Name :
    Status : Other
    
  5. Verifique el estado del puerto STP en SEFOS-1.
    SEFOS-1# show spanning-tree
    Root Id         Priority   32768
                    Address    00:14:4f:6c:69:ee
                    Cost       0
                    Port       0 [0]
                    Max age 20 Sec, forward delay 15 Sec
                    Hello Time 2 Sec
     
    MST00
     
    Spanning tree Protocol has been enabled
     
    MST00 is executing the mstp compatible Multiple Spanning Tree Protocol
    Bridge Id       Priority  32768
                    Address  00:14:4f:6c:69:ee
                    Max age is 20 sec, forward delay is 15 sec
                    Hello Time is 2 sec
                    Dynamic Path Cost is Disabled
                    Dynamic Path Cost Lag-Speed Change is Disabled
    Name              Role         State        Cost     Prio   Type
    ----              ----         -----        ----     ----   ------
     
    X10/25 		  ; ; ; ; ; ; ; ; ;Designated	   ; ; ;Forwarding   2000      128   ; ; ;	P2P
    X10/26  ; ; ; ; ; ; ; ; ; ;		Designated    ; Forwarding   2000      128  ; ; ; ;	P2P
    po100 		  ; ; ; ; ; ; ; ; ; ;Designated 	 ; ; ; Forwarding   2000      128  ; ; ; 	P2P
    ...
    
  6. Ejecute Ping de forma continua desde el host A al host C.

    No debe haber pérdida de datos durante el reenvío de tráfico.

  7. Verifique el resumen de canal de puerto.
    SEFOS-1# show etherchannel summary
     
    Port-channel Module Admin Status is enabled
    Port-channel Module Oper Status is enabled
    Port-channel System Identifier is  00:14:4f:6c:69:ee
     
    Flags:
    D - down             P - in port-channel
    I - stand-alone      H - Hot-standby (LACP only)
    AD - Admin Down      AU - Admin Up
    OD - Operative Down  OU - Operative Up
     
    Number of channel-groups in use: 1
    Number of aggregators: 1
     
    Group  Port-channel        Protocol   Ports
    -------------------------------------------------------------------------
    100    Po100(P)[AU,OD]     LACP       X10/1(P),X10/2(P)
    ...
    
  8. Cerrar el puerto xl-ethernet 0/1 y verificar el resumen de canal de puerto
    SEFOS-1# configure terminal
    SEFOS-1(config)# int xl 0/1
    SEFOS-1(config-if)# shut
    SEFOS-1(config-if)# end
    SEFOS-1# show etherchannel summary
     
    Port-channel Module Admin Status is enabled
    Port-channel Module Oper Status is enabled
    Port-channel System Identifier is  00:14:4f:6c:69:ee
     
    Flags:
    D - down             P - in port-channel
    I - stand-alone      H - Hot-standby (LACP only)
    AD - Admin Down      AU - Admin Up
    OD - Operative Down  OU - Operative Up
     
    Number of channel-groups in use: 1
    Number of aggregators: 1
     
    Group  Port-channel        Protocol   Ports
    -----------------------------------------------------------------
    100    Po100(P)[AU,OD]     LACP       X10/1(D),X10/2(P)
    ...
    

    LA se configuró adecuadamente si el tráfico fluye por el grupo de canal de puerto.

Información relacionada