-> load -source http://<ip_address_or_hostname>/Sun_System_Firmware-9_5_2_g-SPARC_T7-4.pkg /SP/firmware
NOTE: An upgrade takes several minutes to complete. ILOM
will enter a special mode to load new firmware. No
other tasks can be performed in ILOM until the
firmware upgrade is complete and ILOM is reset.
Are you sure you want to load the specified file (y/n)? y
Preserve existing configuration (y/n)? y
..............................................................................................................................................................................................................................................................................................
Firmware update is complete.
ILOM will now be restarted with the new firmware.
Une fois que l'image initiale du microprogramme du nouveau système est chargée, le SP redémarre automatiquement à partir du lecteur flash principal. Lors du redémarrage, le SP utilise les valeurs d'usine par défaut même si vous avez répondu y à la question Preserve existing configuration (y/n)?
-> /sbin/reboot
Stopping coredump capture...done.
Watchdogd: Stopping patting ... Done
Network Interface Plugging Daemon...stop eth0...done.
Stopping kernel log daemon....
...
Mounting root filesystem read-only...done.
Will now restart.
Restarting system.
+****
Primary Bootstrap.
SYSRST = 0x1
Reading RO_Hw_Straps
Searching for packages
Good uboot CRC for data=[*000c0000, len=553b4] in pkg *0013f800 (crc: 0x44f46b65)
Good uboot CRC for data=[*000c0000, len=80000] in pkg *00140000 (crc: 0xb0b8c9ac)
Good kernel CRC for data=[*00142000, len=1e0de8] in pkg *00140000 (crc: 0xbf324077)
Good root CRC for data=[*00340000, len=ef1000] in pkg *00140000 (crc: 0x5d3b8e31)
Good vbscdir CRC for data=[*01740000, len=4c000] in pkg *00140000 (crc: 0x7a62c323)
Good uboot CRC for data=[*018c0000, len=553b4] in pkg *0193f800 (crc: 0x2f78db1d)
Good uboot CRC for data=[*018c0000, len=80000] in pkg *01940000 (crc: 0x97d92980)
Good kernel CRC for data=[*01942000, len=1df2e0] in pkg *01940000 (crc: 0xf7697623)
Good root CRC for data=[*01b40000, len=ef1000] in pkg *01940000 (crc: 0xb19fd0e5)
Good vbscdir CRC for data=[*02f40000, len=4c000] in pkg *01940000 (crc: 0xda3cef04)
Starting U-Boot at 0x000c0000\ufffd
U-Boot 2010.03
Custom Pilot3 U-Boot 0.1 (Dec 4 2015 - 11:41:49) r105871
VGA buffer reserved 0x800000 bytes at 0x80000000
sptrace allocated 0x800000 bytes at 0x9F800000
DRAM: 496 MB
Flash: 48 MB
In: serial
Out: serial
Err: serial
ARM restart caused by: reboot
hardware interface reset by: none
Galactic1: 0x4000c900, Galactic2: 0x0
The host is OFF(S5) (hostWantsPwr=0, powerGood=0,
allowPwrOn=0|0, outOfReset=0, fatalError=0).
...
Le processus continue. Dans cet exemple, la section en italique indique une sortie différente de la mise à niveau de microprogramme classique. Dans ce cas, cette sortie est normale lors d'une mise à niveau du microprogramme d'une version antérieure à la version 9.5.2.g vers la version 9.5.2.g ou ultérieure.
Loading kernel module video. Loading kernel module Timer. Mounted vbsc Erasing the nand ... Erasing 512 Kibyte @ 40000000 -- 100 % complete. no UBI volumes found, initializing media: erasing media.. formatting media.. UBI device number 0, total 2048 LEBs (1056964608 bytes, 1008.0 MiB), available 2024 LEBs (1044578304 bytes, 996.2 MiB), LEB size 516096 bytes (504.0 KiB) UBI volumes (0): params: (20.2 MB) created mounted persist: (106.3 MB) created mounted coredump: (70.4 MB) created mounted large: (64.5 MB) created mounted extra: (36.4 MB) created mounted package: (230.3 MB) created mounted miniroot: (468.1 MB) created mounted Available freespace: 0 MB Checking configuration files state ... ... not preserving config ... Restoring configuration files ... params: (20.2 MB) exists was_mounted persist: (106.3 MB) exists was_mounted coredump: (70.4 MB) exists was_mounted large: (64.5 MB) exists was_mounted extra: (36.4 MB) exists was_mounted package: (230.3 MB) exists was_mounted miniroot: (468.1 MB) exists was_mounted Available freespace: 0 MB Saving TLI data...FAILED Removing old configuration files Removing platform specific files Restoring default configuration files...Done Restoring TLI data...FAILED Configuration files state good 1970-01-01 00:02:42 ** Error: Did not find any saved ilom package file sp_trace_write failed: -1 Setting the system clock. System Clock set to: Mon Dec 7 18:51:52 UTC 2015. Initializing SP Trace Buffers Setting up networking.... Will now mount local filesystems:. Will now activate swapfile swap:done. Cleaning up temporary files...Cleaning /var/run...done. Cleaning /var/lock...done. ... Starting ILOM Watchdog daemon. Done Running plat...Preparsing sensor.xml... ( took 12 seconds ) done Probing frus ...done Done running plat psnc_file_read: cannot access file '/persist/psnc_backup1.xml' Identifying Product Data...Backup2 Setting poweron delay... Starting Dynamic FRUID Daemon early init: dynafrud_early_init Done (0) INIT: Entering runlevel: 3 Preparsing sensor.xml... ( took 1 seconds ) done Starting Event Manager: eventmgr . Done ... waiting for GM ready ....GM is ready Starting Sppostadm: -a Done ORACLESP-<XXXXXXXX> login:
Voir la section Restauration des propriétés réseau du processeur de service.