Access Command Line Interface (CLI) in Oracle Hardware Management Pack Utility

To access the Oracle Hardware Management Pack CLI:

1. Obtain Oracle Hardware Management Pack.
   • Download the Oracle Hardware Management Pack at:

     https://support.oracle.com

   • Get the Add-on software pack from Oracle System Assistant.

   Refer to Oracle 3.2 TB NVMe SSD Product Notes in Oracle Flash Accelerator F320 PCIe Card and Oracle 3.2 TB NVMe SSD Product Notes for additional download information.

2. Access host server console devices remotely or locally.

   Ensure that a KVM console is remotely or locally connected to the server.

   Refer to the servers service manual.

   • Connect an Ethernet cable to the Gigabit Ethernet (NET) connectors as needed for OS support.

   • Connect to the service processors Oracle ILOM over the network and connect an Ethernet cable to the Ethernet port labeled NET MGT.

   • Access the Oracle ILOM command-line interface (CLI) locally using the management port and connect a serial null modem cable to the RJ-45 serial port labeled SER MGT.

   • To interact with the system console locally, connect a mouse and keyboard to the USB connectors and a monitor to the DB-15 video connector.

3. Open a CLI terminal.
4. Type a command.

   See Oracle Hardware Management Pack Documentation.

   Refer to the server documentation.

Related Information

• Oracle Hardware Management Pack Documentation

• Servicing the NVMe Drive Using Oracle Hardware Management Pack

• Product Overview