The program description deals with the following:
The parameters for B protocol and BSC asynchronous protocol and TCP/IP are updated, i.e. programmed, changed or cleared, with this program. Data which has already been stored can be displayed for information.
These types of protocol are used, for example, for communication with a background system. Please ensure that the protocol parameters correspond to the connected partner system.
The following description deals with all available options for update of this basic data.
As with nearly all programs the following also applies here:
Field with firmly defined selection options
Select one of the offered DTM protocols by clicking onto the field and with a second click selecting the required option.
The system offers the following types of protocol:
Field with firmly defined selection options
Select one of the offered debug levels by clicking onto the required field and with a second click selecting the debug level required.
The system offers the following debug levels:
Note:
Only select
a value higher than "0" for the debug level if a communication
protocol is required for error analysis. The data appears in file
"errlog" in directory work
of the relevant system unit.
Entry range permitted: numeric
Default = -1
Entry range permitted: numeric 1 - 9999
Default 200
Entry range permitted: numeric 0 - 9
Enter a value to define how the protocol is to be used.
Entry range permitted: numeric 0 - 9
With configuration of a TCP/IP connect the port no. should be entered in this field. The entered no. should match the port no. of the background system.
Select one of the offered baud rates by clicking onto the field and with a second click choosing the required baud rate.
The system offers the following baud rates:
Please note that the baud rate permitted must correspond to the setting in the partner system.
Select one of the options offered by clicking onto the field and with a second click choosing the value required.
The system offers the following:
Please note that this setting must correspond to the setting in the partner system.
Select one of the offered options by clicking onto this field and with a second click choosing the value required.
The system offers the following:
Please note that this setting must correspond to the setting in the partner system.
Entry range permitted: numeric 0 - 4095937
Default 40000
Entry range permitted: numeric 0 - 127
Default 1
Entry range permitted: numeric 0 - 127
Default 00
Entry range permitted: numeric 0 - 999
Default = 10
Switch active: BSC protocol in transparent
mode
Switch deactivated: No
transparent mode
Switch active: Direct connection (no
modem)
Switch deactivated: Connection
via modem