The program description deals with the following:
The data for connection of a payment terminal, type CCV van der Velde, can be updated, i.e. programmed, changed or cleared, with this program. Data which has already been stored can be displayed for information.
The interface and link to a processing unit are defined here and the number of the device-specific operation mode of the EFT terminal is set.
Note:
Payment terminal devices are required for payment with
magnetic cards. Further parametering is necessary, e.g. the appropriate Payment type with link of the permitted Credit card, etc., to operate this terminal.
The following description deals with all available options for update of this basic data.
As with nearly all programs the following also applies here:
Field with firmly defined selection options
Select one of the debug levels offered by clicking onto the field and with a second click choosing the required option.
The system offers the following debug levels:
Note:
Only select a value higher than "0" for the debug level if
a protocol for communication of the payment terminal is required for error analysis.
Details are provided in file "errlog" in directory work of the appropriate system unit.
Entry range permitted: numeric
Default = 2000 milliseconds
Entry range permitted: numeric
Default = 95000 milliseconds
Entry range permitted: numeric
Default = 2000 milliseconds
Field with firmly defined selection options
Select one of the offered baud rates by clicking onto the field and with a second click choosing the appropriate baud rate.
The system offers the following baud rate:
Default = 1
Enter the number of the terminal in this field. The value entered must match up to the entry in the appropriate payment type, i.e. the payment terminal whose no. is entered in program Payment type will be selected.